# Define quality factor for parallel resonance and write its mathematical expression.

6 views
Define quality factor for parallel resonance and write its mathematical expression.

Quality Factor of Parallel AC Circuit at resonance: The quality factor or Q-factor of parallel circuit is defined as the ratio of the current circulating between two branches of the circuit to the current taken by the parallel circuit from the source. It is the current magnification in parallel circuit.

Formula:

## Related questions

Write simple example of Boolean expression for SOP and POS.

The power factor at resonance in R-L- C parallel circuit is?

Define susceptance and admittance for parallel circuit.

The sum of product expression for a Boolean function can be derived from its truth table by (a) AND operation of the product terms. (b) NOR operation of the product terms. (c) OR operation of the product terms. (d) NAND operation of the product terms.

Describe the resistive method for liquid level measurement. Write its advantages and disadvantages.

Explain Faraday’s second law of electrolysis and give its expression.

In a radio transmitter, the frequency of the crystal oscillator will be stable for a long time if the quality factor of the crystal resonator is  (a) > 100 (b) > 500 (c) > 1000 (d) > 20000

Define alloy. Write it’s types.

Define Electrolyte. Write its types.

A series RLC circuit has a resonant frequency of 1 KHz and a quality factor Q = 100. If each of the R,L and C is doubled from its original value, the new Q of the circuit is:  (1) 25 (2) 50 (3) 100 (4) 200

What is parallel and series resonance?

The series and parallel resonance on L-C circuit differs in that?

For the circuit shown in figure, the Boolean expression for the output y in terms of inputs P, Q, R and S is

Define modulus of a counter. Write the numbers of flip flops required for Mod-6 counter.

Define the term 'Ripple factor' for rectifier.

Explain in brief the working principle of strain gauge. Define gauge factor and list out types of strain gauges.

Define ripple factor and PIV of diode.

Define form factor and peak factor.

The power flow problem mathematical model for a linear transmission network (A) is non-linear (B) is linear (C) considers time variation of generation (D) does not consider tap-changing transformers

Define rectifier and list its types.

Define contract and state its types.

Define Electrical Installation and give its classification.

Define admittance and state its unit.

Define potential difference and give its unit.

Define photo resistor. State its symbol and its two applications.

Define magnetic flux density and state its formula.

Define magnetic field strength and state its unit.

Define reluctance and give its unit.

Define MMF and state its unit.

What is the mathematical relationship between resistance and conductance?

Which of the following statements is incorrect? A) During parallel resonance impedance at resonance is minimum B) During parallel resonance current is magnified C) During series resonance current at resonance is maximum D) During series as well as parallel resonance, the power factor is unity

In parallel RLC resonance circuit at resonance the current will be  (1) Minimum (2) Maximum (3) Zero (4) Infinite

A parallel AC. circuit in resonance will?

The purpose of a parallel circuit resonance is to magnify?

Explain operation of series inductor filter and find out its ripple factor.

If the feedback factor of an amplifier is 0.1 and its gain without feedback is 40, then its gain with feedback is (a) – 13.3 (b) 200 (c) 8 (d) 10

The maximum demand of consumer is 2 kW and his daily energy consumption is 20 units. Its Load Factor is (1) 10.15% (2) 41.6 % (3) 50 % (4) 60%

A 1-phase, 7.46 kW motor is supplied from a 400 V, 50 Hz A.C mains. Its efficiency is 85% and power factor is 0.8 lagging. Calculate the KVA input (1) 9.56 kVA (2) 5.4 Kva (3) 10.97 kVA (4) 8.6 kVA

Define Resonance.

What is Q factor in resonance?

Derive an expression for energy stored in a magnetic field .

Write one advantage and one disadvantage each for spring control method and gravity control method.

Draw Hysteresis loop for Hard steel and soft steel. Also write one application of each material.

Write the relation between phase and line current, phase and line voltage for Star connection.

Write the factors on which capacity of parallel plate condenser depends.

Draw the symbol, logic expression and truth table of NOR gate.