# How many bits are needed to address 64 K memory: -

10 views
How many bits are needed to address 64 K memory: - a) 3 b) 10 c) 16 d) 32

–1 vote

How many bits are needed to address 64 K memory: - 16

## Related questions

How many bits Internet address is assigned to each host on a TCP/IP Internet which is used in all communications with host?  A) 16 bits B) 32 bits C) 48 bits D) 64 bits

How many bits are required to represent one nibble ?

How many bits are required to encode 32 level PCM:  (1) 6 (2) 5 (3) 4 (4) 3

If we have 30kva, 250 kva, 300kva d.g set than how many earthing we do?

How many characters per sec (7 bits + 1 parity) can be transmitted over a 2400 bps line if the transfer is synchronous (1 start bit and 1 stop bit)?  A) 300 B) 240 C) 250 D) 275

Byte is string of how many bits?  (A) Eight (B) Four (C) Two (D) Sixteen

The address range for M = 64 words storage in hexadecimal format is  1. 00 to 3F  2. 00 to FF  3. 0 to 3  4. 0 to F

The register in the 8085A that is used to keep track of the memory address of the next op -code to be run in the program is the : a. stack pointer b. program counter c. accumulator d. None of above

A 20-bit address bus allows access to a memory of capacity  (1) 1 Mb (2) 2 Mb (3) 32 Mb (4) 64 Mb

How many flip-flops are required to build a binary counter circuit to count from 0 to 1023 ? (a) 1 (b) 6 (c) 10 (d) 23

How many minimum number of NOR gates are required to realize a two-input X-OR gate?

How many flip-flops are required to construct a mod-32 counter?  A) 32 B) 6 C) 5 D) 4

Intrinsic semiconductor material is characterized by a valence shell of how many electrons? a) 1 b) 2 c) 4 d) 6

In Computer memory size K indicates Kilo, which is equal to  (a) 1000 (b) 1024 (c) 100 (d) 10000

How much voltage is needed to produce 2.5 A of current through a 200 ohms resistor? A.50 V B.500 V C.80 V D.8 V

How much resistance is needed to draw 17.6 mA from a 12 volt source? A.212 ohms B.6.8 kohms C.68 ohms D.680 ohms

The mechanism that bring a page into memory only when it is needed is called _____________  (1) Segmentation (2) Fragmentation (3) Demand Paging (4) Page Replacement

Calculate the size of memory address space for a 16 bit data and 20 bit address bus. A) 1 MB B) 2 MB C) 3 MB D) 4 MB

An array of size 100 is given and the memory addressing is byte by byte. If The base address of the array is 1000 and every record consists of 40 bytes then address of array[10] will be  (1) 1040 (2) 1400 (3) 1440 (4) 1080

How is a J-K Flip Flop made to toggle  (a) J=0, K=0 (b) J=1, K=0 (c) J=0, K=1 (d) J=1, K=1

How many non-overlapping channels are available in IEEE 802.11b

In case of a ‘High Voltage DC’ transmission, how many minimum conductors are required?

If a 5-bus test system contains 6 transmission lines and one transformer, how many non-zero elements are there in the system Y-bus ? (A) 25 (B) 12 (C) 11 (D) 19

How many volts are in the power lines?

A certain appliance uses 350 W. If it is allowed to run continuously for 24 days, how many kilowatt- hours of energy does it consume? A.20.16 kWh B.201.6 kWh C.2.01 kWh D.8.4 kWh

About how many times longer would a 10 watt light bulb be able to burn compared to a 100 watt bulb with the same energy?  (A) 10 times longer (B) 100 times longer (C) Same time (D) None of the above

How many time we should half the number n to reach 1.  (1) n (2) log(n) (3) n(log(n)) (4) n2

How many volts does it take to power an Arduino?

In application of superposition theorem, one is required to solve as many circuits as there are  1. Nodes 2. Branches 3. Meshes 4. Sources

The superposition theorem requires as many circuits to be solved as there are?

Speed of improvement of computation of 64 point DFT by using FFT compared to direct computation is about  A) 4 B) 8 C) 16 D) 20

And application.

In 8085 microprocessor, how many T-states does OPCODE FETCH machine cycle normally require (i.e., when HOLD and WAIT signals are NOT forced)? A) 4 to 6 B) 3 to 8 C) 2 to 3 D) 8 to 12

How many watt-hours represent 65 W used for 18 h? A.11.7 Wh B.1,170 Wh C.11,700 Wh D.117,000 Wh

Approximately how many milliamperes of current flow through a circuit with a 40 V source and 6.8 k ohms of resistance? A.27.2 mA B.59 mA C.5.9 mA D.590 mA

A MOSFET has how many terminals?

Three phase synchronous motor will have how many sliprings?

How many servos can be controlled by Arduino?

How many watts does a power plant produce?

How many amps do you need for a house?

How many insulator disc used for 33 kV transmission voltage line?