# Convert hexadecimal value 16 to decimal: -

14 views

Convert hexadecimal value 16 to decimal: - a) 2210 b) 1610 c) 1010 d) 2010

Convert hexadecimal value 16 to decimal: - 2210

## Related questions

Decimal equivalent of Hexadecimal number (C3B1)16 is: A) 12197 B) 32097 C) 52097 D) 50097

The decimal equivalent of the hexadecimal number E5 is  (a) 279 (b) 229 (c) 427 (d) 3000

The decimal equivalent of a Hexadecimal no. (F8E6)16 is

Hexadecimal equivalent of the decimal number 25610 is

A bimetallic strip is used to convert a temperature change - a) into mechanical displacement b) into electrical displacement c) into neither mechanical nor electrical displacement d) all of the above

Convert –  (255)10 = (?)16 = (?)8  (157)10 = (?)BCD = (?) Excess3

In a single phase induction energy meter, in order to obtain true value of energy, the shunt magnetic flux should lag behind the applied voltage by   (a) 90o (b) 0o (c) 45o (d) 60o

8 in decimal system is equal to ____ in binary system

A PMMC instrument has FSD of 100 μA and a coil resistance of 1 kΩ. To convert the instrument into an ammeter with full scale deflection of 100 mA, the required shunt resistance is (A) 1 Ω (B) 1.001 Ω (C) 0.5 Ω (D) 10 Ω

To convert a S-R flip-flop to D flip-flop (a) D input is given to S and D input to clock (b) D input is given to S and D to R (c) D input is given to clock and D to S input (d) D input to S and clock to R

Which rectifier can convert AC to DC? A. Half wave rectifier B. Full wave rectifier C. Bridge wave rectifier D. All of these

It is desired to convert a 0-1000A meter movement, with an internal resistance of 100 ohms, into a 0-100mA meter. The required value of shunt resistance is about

How is a thyristor used to convert AC to DC?

Can you convert analog signal to digital?

Can transformer convert AC to DC?

Which device use to convert DC to AC?

The 16 bit flag of 8086 microprocessor is responsible to indicate ___________ A. the condition of result of ALU operation B. the condition of memory C. the result of addition D. the result of subtraction

The microprocessor can read/write 16 bit data from or to ________ A. memory B. I /O device C. processor D. register

When converting 0.16 mA to microamperes, the result is? A.16 μA B.160 μA C.1,600 μA D.0.0016 μA

Number of control lines required for 16 to 1 multiplexer is

A 1 to 16 demultiplexer has (a) 2 select inputs (c) 4 select inputs, (b) 3 select inputs (d) 8 select inputs

Initially the number decimal 8 is stored. If instruction RAL is executed twice, the final number stored will be: (1) Decimals 8 (2) Decimal 16 (3) Decimal 32 (4) Decimal 2

In the 8421 BCD code the decimal number 125 is written as   (A) 1111101 (B) 0001 0010 0101 (C) 7D (D) None of the bove

Decimal equivalent of binary 1111 1111 1111 1111 is • 16,384 • 65,536 • 1000000 • None of the above.

What is the decimal equivalent of hexa decimal no (8A6)?  (A) 1422 (B) 1242 (C) 2122 (D) 2214

If the distance of screen from a CRT to center of deflection plates is 15 cm, the length of deflection plates is 2 cm, the distance between the plates is 1 cm and accelerating voltage is 500 V, deflection sensitivity is   (a) 33.2 V/cm (b) 0.03 cm/V (c) 66.4 V/cm (d) 0.015 cm/V

Sample -and -hold circuits in ADCs are designed to : - a) sample and hold the output of the binary counter during the conversion process b) stabilize theAD Cs threshold c) voltage during the conversion process stabilize the input analog d) signal during the conversion process sample and hold the ADC staircase waveform during the conversion process

Base 10 refers to which number system? a) binary coded decimal b) decimal c) octal d) hexadecimal

A single transistor can be used to build which of the following digital logic gates : - a) AND gates b) OR gates c) NOT gates d) NAND gates

How many bits are needed to address 64 K memory: - a) 3 b) 10 c) 16 d) 32

Thermocouple is used to measure : - a) AC b) DC c) Both d) None

The main sources of Errors in Permanent Magnet moving Coil (PMMC) are due to : - a) weaking of the permanent magnet due to aging at temperature effects b) weaking of spring due to aging and temperature effects c) change of resistance of the moving coil with temperature d) all the above

The term absolute Pressure is used for a pressure measured relative to: - a) vacuum pressure b) some fixed pressure c) atmospheric d) all the above

Tachometer works essentially as a generator with output voltage proportional to magnitude of the : - a) Angular Velocity of the shaft b) Torque of the shaft c) Temperature of the shaft d) Back Lash of the shaft

When measuring strain, ballast circuit use a capacitor to act as a high pass filter. This is done when:  a) Static strain are being measured b) Dynamic strain are being measured c) Both Static and dynamic strain are being measured d) None of the above

Data Acquisition system are used to measure and record analog signal in different ways i.e. : -  a) Signals which originates from direct measurement of electrical quantities b) Signals which originate from the use of transducer. c) Signals which oscillates in simple harmonic motion and dies out slowly. d) Both (a) and (b)

The input voltage to an OP AMP is a large voltage step. The output is an exponential waveform that changes to 0.25 V in 0.1µs (microsecond). The slew rate of the OP AMP is : -  a) 5V/µs b) 2.5 V/ µs c) 3V/µs d) 4.5V/ µs