# What is the ratio of resistance and impedance better known as ?

11 views
What is the ratio of resistance and impedance better known as ? (A) Peak factor (B) Pitch factor (C) Power factor (D) Form factor

## Related questions

The transformer which transforms unbalanced line to a balanced line is better known as  (A) Impedance transformer (B) Amplifier (C) Balun (D) Oscillator

The ratio of limiting friction and normal reaction is known as?

A negative feedback loop returning a voltage to the input raised the input impedance and making the circuit a better

The ratio of maximum displacement of the forced vibration to the deflection due to static force is known as : (A) Damping Factor (B) Damping Coefficient (C) Logarithmic Decrement (D) Magnification Factor

Two bulbs of 500 W and 200 W rated at 250 V will have resistance ratio as?

The ratio of active power to apparent power is known as____ factor.

A synchronous motor at no load condition is known as synchronous condenser and improves the (a) stability (b) efficiency (c) power factor (d) frequency of the integrated system

A single-phase transformer has a turns ratio of 1 :2 and is connected to a purely resistive load as shown in the figure. The magnetizing current drawn is 1A, and the secondary current is 1A. Ifcore losses and leakage reactances are neglected, the primary current is  A)1.41A B)2A C) 2.24A D)3A

The property of materials by which they can be drawn into wires is known as: A) malleability B) elasticity C) creep D) ductility

The phenomenon of squirrel cage motors sometimes showing tendency to run at very low speed is known as (1) Cogging (2) Crawling (3) Damping (4) Skewing

The property of a material which opposes the creation of magnetic flux in it is known as?

What happens to the resistance of a wire when its length as well as the cross-sectional area are doubled? A) It doubles B) It becomes 4 times C) It becomes 2π times D) It remains the same

The ratio of the width to the height of the picture frame is called as A) Rastar B) Aspect Ratio C) Length Ratio D) Efficiency

Gauge factor of strain gauge is defined as the ratio of per unit change in the ______.

Q factor is defined as the ratio of  (A) Resistance /inductance of reactive element (B) Resistance/capacitance of reactive element (C) Resistance to reactance of reactive element (D) Resistance to susceptance of reactive element

A chopper operating at a fixed frequency is feeding an R-L load. As they duty ratio of the chopper is increased from 25% to 75%, the ripple in the load current.

Angle between the shear plane and work surface is known as : (A) lip angle (B) rake angle (C) cutting angle (D) shear angle

Information that a computer produces and delivers back to the user is known as ____.  a) Input b) Output c) Both (a) and (b) d) None of the above

What is the resistance of a coil which draws 10 A and dissipates 1520 W? A) 152 Ω B) 15.2 Ω C) 1.52 Ω D) None of these

The power supply whose output voltage varies with variation in input voltage or output load current is known as   (a) Regulated Power Supply (b) Unregulated Power Supply (c) Uninterruptible Power Supply (d) Switched Mode Power Supply

When a body reflects all the radiations incident on it, then the body is known as   (a) White body (b) Grey body (c) Black body (d) Transparent body

When a conductor cuts magnetic flux, an emf is induced in the conductor. This is known as  (a) Joule's law (b) Faraday's law (c) Coulomb's law (d) Ampere’s law

The equation V·j = 0 is known as : (A) Poissons’s equation (B) Laplace equation (C) Continuity equation (D) Maxwell equation

If Poisson's ratio of a resistance wire strain gauge is 1.8, then neglecting piezo-resistive effects, its Gauge factor is :  (A) 2.8 (B) 2.6 (C) 4.6 (D) 3.6

A 50Ω transmission line is terminated in an impedance of 20-j50. What will be the reflection coefficient? A) 0.69 B) 1.69 C) 6.9 D) 16.9

The per unit impedance of a circuit element is 0.30. If the base kV and base MVA are halved, then the new value of the per unit impedance of the circuit element will be:  (A) 0.3 (B) 0.6 (C) 0.003 (D) 0.006

Memory that temporarily stores data and that can be erased or changed is known as  a) Cache Memory b) Read Only Memory c) Flash Memory d) Random Access Memory

The circuit has resistors, capacitors and semi-conductor diodes. The circuit will be known as

Consider a circuit with three parallel branches connected across a DC supply. What is the ratio of the branch currents I1 : I2 : I3 if the branch resistances are in the ratio of 2 : 3 : 4 respectively? A) 2 : 3 : 4 B) 6 : 4 : 3 C) 4 : 3 : 2 D) None of these

What is the relationship between power and resistance?

if voltage is 230 Volts , frequency is 50 Hz and current is 1 ampere then what will be the resistance?

If resistance is 8 Ohm and current is 16 ampere then what will be the voltage and power?

The lossless line of characteristics impedance 300 Ohm is terminated in a pure resistance of 200 Ohm. The value of the standing wave ratio is  (a) 1.5 (b) 0.67 (c) 1.0 (d) 1.25

The rotor impedance of a slip ring induction motor is (0.1 + j0.6)Ohm/ ph . The resistance/ph to be inserted into rotor to get maximum torque at starting should be

A transformer has maximum efficiency at 3/4 full load. The ratio of its iron losses and full load copper loss is : -  a) 16/9 b) 4 / 3 c) 3/4 d) 9 /16

A casting defect which occurs near the ingates as rough lumps on the surface of a casting is known as 1. Shift 2. Sand wash 3. Swell 4. Scab