# The deflecting torque of a moving coil instrument depends on

7 views
The deflecting torque of a moving coil instrument depends on (a) supply frequency (c) flux in the coil (b) inverse of area of coil (d) square of the voltage

## Related questions

A moving coil instrument of resistance 5 Ohm requires a potential difference of 75 mV to give a full scale deflection. The value of shunt resistance needed to give a full scale deflection at 30 A is

Series resistance required to read 0-250 V with a moving coil instrument of internal resistance 2 ohm and full scale deflection of 50 mA is (a) 49998 Ω (b) 4998 Ω (c) 498 Ω (d) 49.8 Ω

A moving coil instrument has a resistance of 10 W and gives full scale deflection when carrying a current of 50 mA. To measure current upto 100 A, we will have to connect • 10 W resistance in series • 10 W resistance in parallel • 10/1999 W resistance in series • 10/1999 W resistance in parallel

Name the material used for :- (i) Moving coil (ii) Permanent magnet in PMMC instrument.

The effect of stray magnetic fields on the actuating torque of a portable instrument is maximum when the operating field of the instrument and the stray fields are  A) Perpendicular B) Parallel C) Inclined at 60" D) Inclined at 30°

A null type of instrument as compared to a deflecting type instrument has (a) higher accuracy (b) lower sensitivity (c) faster response (d) All of the above

A dynamometer type wattmeter with its voltage coil connected across the load side of instrument reads 250 W. If the load voltage be 200 V, what power is being taken by load? The voltage coil has resistance of 2000 Ω. (1) 200 W (2) 215W (3) 230 W /(4) 245 W

In a particular meter, the deflecting torque is directly proportional to the current flowing through it, the type of meter is (a) moving coil (b) moving iron (c) induction (d) electro-static

A moving coli ammeter has a fixed shunt of 0.02 Ω with a coil circuit resistance of R=1 kΩ and needs potential of 0.5 V across it for full scale deflection. Calculate the value of shunt to give full scale deflection when the total current is 10 A. (1) 0.05 Ω (2) 0.005 Ω (3) 0.5 Ω (4) 0.0005 Ω

The dielectric strength of ferromagnetic materials depends to a large extent on (a) Intensity of electric field (b) Presence of magnetic materials in vicinity (c) Area of hysterisis loop for materials (d) Frequency of applied voltage

The size of a conductor used in power cables depends on the:  (A) operating voltage  (C) current to be carried (B) power factor (D) type of insulation used

The magnetic field on the axis of a current carrying polygonal coil will have only a horizontal component parallel to the Plane of the coil

The current coil of a single-phase energy meter is wound on (a) One limb of the laminated core (b) Both the limbs of the laminated core with same number of turns (c) Both the limbs of the laminated core with different number of turns (d) The centre of the limb on the laminated core

A PMMC instrument has FSD of 100 μA and a coil resistance of 1 kΩ. To convert the instrument into an ammeter with full scale deflection of 100 mA, the required shunt resistance is (A) 1 Ω (B) 1.001 Ω (C) 0.5 Ω (D) 10 Ω

If the phase -angle of the voltage coil of a directional relay is 50°, the maximum torque angle of the relay is: (A) 130° (B) 100° (C) 50° (D) 25°

A permanent magnet moving coil ammeter has a coil resistance of 99 ohm and Full Scale Deflection (FSD) current of 0.1mA. Shunt resistance is 1 ohm. Current through the meter at 0.5 F.S.D is:

A moving coil of meter has 100 turns, and a length and depth of 10mm and 20mm respectively. It is positioned in a uniform radial flux density of 200 mT. The coil carrier current capacity is 50 mA. The torque on the coil is

A moving coil meter has a resistance of 3 Ω and gives full scale deflection with 30 mA. To measure voltage up to 300 V, the external resistance to be connected in series with the instrument is (A) 9997 Ω (B) 10000 Ω (C) 997 Ω (D) 10003 Ω

Internal resistance of a cell depends on  (A) Terminal voltage (B) Torque (C) Current (D) Area of the plates

The moving system of an indicating type of electrical instrument is subjected to (a) a deflecting torque (b) a controlling torque (c) a damping torque (d) All of the above

Moving coil instruments have which one of the following scales ? (a) Logarithmic scale (b) Uniform scale (c) Non-uniform scale (d) Squared scale

The main sources of Errors in Permanent Magnet moving Coil (PMMC) are due to : - a) weaking of the permanent magnet due to aging at temperature effects b) weaking of spring due to aging and temperature effects c) change of resistance of the moving coil with temperature d) all the above

The coefficient of coupling between two air core coils depends on   (A) mutual inductance between two coils only (B) self inductances of the two coils only (C) mutual inductance and self inductances of the two coils (D) none

The diameter of conductor used in LT 660 V grade power cables depends on

The total magnetic moment  1. is called saturation magnetization.  2. depends on the number of magnetic dipoles per unit volume, the instant electric current and the area of the current loop.  Which of the above statements is/are correct ?

The diameter of the rotor shaft for an electric motor depends on which of the following (1) rpm only (2) hp only (3) hp and rpm (4) hp, rpm and Power factor

In a portable instrument, the controlling torque is provided by  A) Spring B) gravity C) eddy currents D) all of the above

A system is causal if the output of any time depends only on   (A) Values of input in the past and in the future (B) Values of input at that time and in the past (C) Values of input at that time and in the future (D) none

In a Synchronous motor, the magnitude of stator back e.m.f (Eb) depends on

The voltage gain of a common base amplifier depends on  1. Load resistor RL 2. input resistance of transistor 3. Ac alpha 4. All the above