# In a Bode magnitude plot, which one of the following slopes would be exhibited at high frequencies by a

16 views
In a Bode magnitude plot, which one of the following slopes would be exhibited at high frequencies by a 4th order all-pole system?

In a Bode magnitude plot, which one of the following slopes would be exhibited at high frequencies by a 4th order all-pole system?

## Related questions

The unit circle of the Nyquist plot transforms into unity or 0 dB line of the amplitude plot of the Bode diagram for

Which statement is INCORRECT in relation to NYQUIST and BODE analyses ? (A) Number of closed-loop poles in the right-half S-plane can be determined using Nyquist Criterion. (B) Bode analysis uses two plots, one for magnitude and another for phase angle. (C) Nyquist analysis uses two plots, one for magnitude and another for phase angle. (D) Relative stability can be assessed from both Nyquist and Bode analyses.

In R-L-C series resonant circuit magnitude of resonance frequency can be changed by changing the value of?

If two equal forces of magnitude P act at an angle 9°, their resultant will be

Magnitude of current at resonance in R-L-C circuit?

In the Bode plot of a unity feedback control system, the value of phase of G(jw) at the gain cross -over frequency is - 125°.. The phase margin of the system is (a) - 125° (b) - 55° (c) 55° (d) 125°

Which of the following noise must be considered at high frequencies (microwave frequencies)? (1) Shot noise (2) Random noise (3) Impulse noise (4) Transit time noise

The magnitude of various voltage drops that occur in an alternator depends on?

What is the Laplace transform of step signal of 5 units magnitude?  A) 5s B) 5/s C) s/5 D) 1/s

If a voltage-controlled bus is treated as load bus, then which one of the following limits would be violated?   (a) Active power (b) Reactive power (c) Voltage (d) Phase angle

An absolutely integrable signal x(t) is known to have a pole at s = 2. Which one of the following is true ? (A) B, C and D are true (B) x(t) can be left-sided (C) x(t) can be right-sided (D) x(t) can be both-sided

By adding a pole at the origin of s -plane, the Nyquist plot of a system will rotate by (a) 90° in anti -clockwise direction (b) 90° in clockwise direction (c) 180° in anti -clockwise direction (d) 180° in clockwise direction

The unity circle of Nyquist plot corresponds to zero dB line of Bode plot for  A) High frequencies B) Low frequencies C) Medium frequencies D) All frequencies

By which of the following connections, one-bit binary counter can be obtained from a JK flip-flop?  A) J = K = 0 B) J = K = 1 C) J = K’ D) None of these

The Bode plot is used to analyze  A) All phase network B) Minimum phase network C) Non minimum phase network D) All networks

Of the following, ____ would be considered as a way through which a computer virus can enter into a computer system.  a) E-mail with attachments b) Downloading the data from sites c) Operating the system without antivirus software d) All of the above

What is the Bode amplitude plot of a first-order lowpass system?  (A) Line with slope -40 dB/decade (B) Line with slope -20 dB/decade (C) Line with slope +20 dB/decade (D) Straight line parallel to the frequency axis

Which of the following motors would not be suitable for use as servomotors?  (a) AC induction motor (b) brushless AC motor (c) stepper motor (d) permanent magnet DC motor

For a 2nd order feedback control system, the peak resonance magnitude should be Mp ≤ 1.15. Hence the damping ratio (δ) is  (a) 0.1 (d) 0.5 (c) 0.707 (d) 1

If Ф = angle(G(jw)H(jw)) where w is the gain crossover frequency of Bode plot of the system, phase margin is  A) -180+ Ф B) 180- Ф C) 180+ Ф D) -180- Ф

Which of the following cables can transmit data at high speeds?  A) Coaxial Cable B) Optic Fibre Cable C) Twisted pair Cable D) UTP Cable

In root locus plot, a point on the real axis lies on the locus, if the number of open loop poles plus zeros on real axis to the a) left of the point is odd b) left of the point is even . c) right of the pointis odd d) right of the point is even

The maximum torque of an induction motor is 200 kg-m at a slip of 12%. The torque at 6% slip would be (a) 100 kg-m (b) 160 kg-m (c) 50 kg-m (d) 40 kg-m

Which of the following thyristors can be used for high frequency of operation? A) TRIAC B) DIAC C) SCR D) GTO

Which of the following instruments can be used for measurement of very high value resistances such as insulation resistance in industries? A) Wheatstone bridge B) Megger C) Ohm-meter D) Resistive potentiometer

If stability error for step input and speed of response be the criteria for design, what controller would you recommend (1) P controller (2) PD controller (3) PI controller (4) PID controller

Whether a given point in the S-plane lies on the Root Locus of a system can be determined by (A) Magnitude criterion (B) Angle Criterion (C) Both Magnitude and Angle Criteria (D) Break-in and Break-away Criteria

The forces, which meet at one point, but their lines of action do not lie in a plane, are called?

A 3-phase voltage source inverter is operated in 180o conduction mode. Which one of the following statements is true ?  (A) Both pole-voltage and line-voltage will have 3rd harmonic components (B) Pole-voltage will have 3rd harmonic component but line-voltage will be free from 3rd harmonic (C) Line-voltage will have 3rd harmonic component but pole-voltage will be free from 3rd harmonic (D) Both pole-voltage and line-voltage will be free from 3rd harmonic components

Which one of the following is not a transducer in the true sense?   (A) Thermocouple (B) Piezoelectric pick-up (C) Photo voltaic cell (D) LCD.

A single-phase induction motor with only the main winding excited would exhibit the following response at synchronous speed  (A) Rotor current is zero (B) Rotor current is non-zero and is at slip frequency (C) Forward and backward rotating fields are equal (D) Forward rotating field is more than the backward rotating field

Which modulation scheme would you suggest for high speed data transmission over a fading channel?  A) MSK B) BPSK C) FSK D) OFDM

Wire-wound resistors are unsuitable for use at high frequencies because they?

Among the logic families, the family which can be used at very high frequency greater than 100 MHz in a 4 bit synchronous counter is

In a series RLC circuit at resonance, the magnitude of the voltage developed across the capacitor  A) Is always zero B) Can never be greater than the input voltage C) Can be greater than the input voltage, however, it is 90° out of phase with the input voltage D) Can be greater than the input voltage, and is in phase with the input voltage

Which of the following laws relates the magnetic field to the magnitude, direction, length, and proximity of the electric current? A) Lenz’s law B) Faraday’s law C) Biot–Savart law D) None of these

In a series RLC circuit at resonance, which of the following quantities attains maximum value ? (A) Current (B) Voltage (C) Power (D) None of the above

A unity negative feedback control system is found to have a gain margin of 20 dB. The Nyquist plot of the system (A) crosses the real axis at +0.1 (B) crosses the real axis at -0.1. (C) crosses the imaginary axis at -0.1 (D) crosses the imaginary axis at +0.1

Which of the following company is associated with manufacture of high capacity transformers in India? A) M/S National Thermal Power Corporation Limited B) M/S Bharat Heavy Electricals Limited C) M/S Heavy Engineering Corporation Limited D) M/S Electricity Authority of India

Which of the following power plants involves high initial cost in erecting?  (A) Hydro-electric power plant (B) Steam power plant (C) Gas turbine power plant (D) Nuclear power plant

The SCR would be turned OFF by voltage reversal of applied anode-cathode ac supply frequency of A) 10 kHz B) 10 Hz C) 5 kHz D) 5 Hz

The speed and torque of induction motors can be varied by which of the following means: 1) Stator voltage control 2) Rotor voltage control 3) Frequency control 4) All of these

Which of the following motor would suit applications where constant speed is absolutely essential ? (A) Brushless dc motor (B) Disk motor (C) Permanent -magnet synchronous motor (D) Stepper motor

Introduction to Bode Plot Introduction to Bode Plot