# The standard for long distance analog signal transmission in process control industry is

28 views
The standard for long distance analog signal transmission in process control industry is

(A) 4-20 mV (B) 0-20 mA (C) 4-20 mA (D) 0-5 V

The standard for long distance analog signal transmission in process control industry is 4-20 mA

## Related questions

what is mean by long transmission line ?

Analog signal

Can you convert analog signal to digital?

Precise control of reactive current flow entering the transmission and distribution systems can be minimized by using (A) synchronous condenser (B) static VAR capacitor (C) capacitor bank (D) thyristor switched reactor in parallel with capacitor

What are the five types of single phase motors used in the industry?

What is a safe distance from power lines?

Standard Commands for Programmable Instruments (SCPI)

If 3000 kW power is to be transmitted over a distance of 30 km, the desirable transmission voltage will be.  (A) 11 kV (B) 33 kV (C) 66 kV (D) 132 kV

What is the use of signal flow graph?

For a 500 Hz frequency excitation, a 50 km long power line will be modeled as

The process of removing the unwanted magnetism is called ______ A) Unmagnetization B) Degaussing C) Diamagnetization D) Depoling

What is the job of a servo in a transmission?

What is design technology? Explain top down design process.

Explain the advantages and disadvantages of using memory I/O and standard I/O.

A differentiator is not usually used in control system, because it : - (A) reduces damping  (B) increases error  (C) reduces gain margin  (D) increases input noise

Explain the essential toques in analog type measuring instruments.

Explain FSM and concurrent process with example.

A unity negative feedback control system is found to have a gain margin of 20 dB. The Nyquist plot of the system (A) crosses the real axis at +0.1 (B) crosses the real axis at -0.1. (C) crosses the imaginary axis at -0.1 (D) crosses the imaginary axis at +0.1

What is the automatic control system?

Negative feedback in a closed-loop control system DOES NOT (A) reduce the overall gain (B) reduce bandwidth (C) improve disturbance rejection (D) reduce sensitivity to parameter variation

What is the difference between analog and digital electronics?

What is the analog circuit?

The time base signal in Cathode Ray Oscilloscope (CRO) is  (1) A square wave signal (2) A sawtooth signal (3) A triangular wave signal (4) A sinusoidal signal

The sampling rate to avoid aliasing for the signal m(t) = 100 cos 200ωt will be A) ≥1/25 sec B) ≥1/50 sec C) ≤1/25 sec D) ≤ 1/50 sec

What is control and automation?

What are the advantages of open loop control system?

What are the different types of control systems?

What is an example of an analog device?

What is an analog voltage?

What is digital and analog electronics?

What is Analog to Digital Converter (ADC) ?

In 8085, whenever a signal is received at TRAP terminal, its program execution is transferred to a subroutine on address A) 0000 H B) 002C H C) 0024 H D) 0004 H

What is a signal in science?

What are the analog components?

The change in value of an analog signal during the conversion process produces what is called the : -  a) quantization error b) resolution error c) Nyquist error d) sampling error

Describe spring control method of producing controlling torque in measuring instrument. Write any two properties required for spring material.

Regulating-transformers are used in power systems for control of

For a short transmission line with r/x ratio of is 1.0, the regulation will be zero when the load power factor is