# The power flow problem mathematical model for a linear transmission network

24 views
The power flow problem mathematical model for a linear transmission network

(A) is non-linear

(B) is linear

(C) considers time variation of generation

(D) does not consider tap-changing transformers

The power flow problem mathematical model for a linear transmission network is non-linear

## Related questions

A network contains linear resistors and ideal voltage sources. If values of all the resistors are doubled then the voltage across each resistor will

Precise control of reactive current flow entering the transmission and distribution systems can be minimized by using (A) synchronous condenser (B) static VAR capacitor (C) capacitor bank (D) thyristor switched reactor in parallel with capacitor

Generally in a power system network, the load is represented as a :  (A) Constant power in both load flow study and in stability study  (B) Constant power in load flow study and constant impedance in stability study  (C) Constant power in stability study and constant impedance in load flow study  (D) Constant impedance in both load flow study and in stability study

A Unified Power Flow Controller (FACTS controller) is a voltage source converter based (A) Inter-phase power controller (B) Static Compensator (C) Combination of series and shunt compensators (D) Solid-state series compensator

The device which allows reverse power flow and withstands highest switch frequency is (A) GTO (B) MOSFET (C) IGBT (D) Inverter grade SCR

Problem on electrical power and energy 2

Problem on electrical power and energy 1

Problem on electrical power and energy 7

Problem on electrical power and energy 6

Problem on electrical power and energy 5

Classify hydro-electric power plants according to water flow regulation and explain in brief.

What is the mathematical relationship between resistance and conductance?

In voltage source converter based HVDC transmission system the active power is controlled by changing (A) phase angle of the converter ac input voltage (B) supply frequency of the converter ac input voltage (C) magnitude of the converter ac input voltage (D) DC voltage at the inverter terminals

Why high voltage is used in power transmission?

What is electric power generation transmission and distribution?

A non-linear network does not satisfy?

What is dataflow model?

Explain switching model of MOSFET.

If resistance is 8 Ohm and current is 16 ampere then what will be the voltage and power?

In load flow Study, a PV bus is treated as a PQ bus when

For a short transmission line with r/x ratio of is 1.0, the regulation will be zero when the load power factor is

The number of independent loops for a network with n nodes and b branches is

The sending end and receiving end voltages of a three-phase transmission line are 10 kV/ph and 9.5 kV/ph, respectively. If the resistance drop is 150 V/ph and receiving end power factor is 0.8, the sending end power factor is (A) 0.745 lagging (B) 0.775 lagging (C) 0.8 lagging (D) 0.85 lagging

Which of the following converts linear displacement from a mechanical reference into a proportional electrical signal containing phase and amplitude information? A) CRO B) LVDT C) RVDT D) None of these

Why do you need a closed circuit for electricity to flow?

If non-linear loads are connected to the power system, then (A) displacement power factor is same as the total power factor (B) displacement power factor is not equal to the total power factor (C) displacement power factor is due to harmonic currents (D) total power factor is due to fundamental component of current

If a 5-bus test system contains 6 transmission lines and one transformer, how many non-zero elements are there in the system Y-bus ? (A) 25 (B) 12 (C) 11 (D) 19

For a fixed value of complex power flow in a transmission line having a sending and voltage V, the real power loss will be proportional to  A) V B) v2 C) 1/V2 D)1/V

A system is linear if and only if it satisfies

Is a convolution linear?

What is a non linear load?

An _____________is a network of electrical components used to supply, transfer and use electric power:  (A) Electric power system (B) Electric power (C) All of the above (D) None of the above

If 3000 kW power is to be transmitted over a distance of 30 km, the desirable transmission voltage will be.  (A) 11 kV (B) 33 kV (C) 66 kV (D) 132 kV

What is the difference between linear and nonlinear electrical loads?

What are the disadvantages of the linear regulator? how are they overcome in the switching regulator? What is continuous and discontinuous mode switching regulator?

The number of loop equations required to completely analysing a network comprising of 8 independent branches and 6 nodes including the reference node shall be A) 3 B) 2 C) 4 D) 5

Which of the following are known as the short circuit parameters of a 2- port network? (A) Z- parameters. (B) H- parameters. (C) Y- parameters. (D) A,B,C,D, parameters.

A network is said to be under resonance when the voltage and the current at the network input terminals are (A) in phase (B) out of phase (C) in phase quadrature (D) in phase, and have equal magnitudes

A network consists of several inductances connected in parallel. The equivalent inductance of the network is given by (A) the sum of the individual inductances. (B) the reciprocal of the sum of the individual inductances. (C) the sum of the reciprocals of individual inductances. (D) the reciprocal of the sum of reciprocals of individual inductances.

A Two-Port Network is said to be symmetrical when the following equalities hold good (A) Z11 = Z22 and Z12 = Z21 (B) Z11 = Z22 (C) Y12 = Y21 (D) Y11 = Y22 and Y12 = Y21

A closed path made by several branches of the network is known as?

what is UPFC?

Series capacitive compensation in EHV transmission line is used to

Corona loss in transmission lines can be reduced by (A) using small diameter conductors (B) using bundled conductors (C) using less spacing between conductors (D) increasing the transmission line voltage

The current flow in a battery is due to ______ A) movement of ions B) movement of protons C) movement of holes D) movement of neutrons

What is the direction of flow when charging a capacitor?