# In a PMMC instrument, the damping provided is :

26 views
In a PMMC instrument, the damping provided is :

(A) air damping (C) eddy current damping (B) fluid damping (D) magnetic damping using a magnet

In a PMMC instrument, the damping provided is : eddy current damping

## Related questions

A PMMC instrument has FSD of 100 μA and a coil resistance of 1 kΩ. To convert the instrument into an ammeter with full scale deflection of 100 mA, the required shunt resistance is (A) 1 Ω (B) 1.001 Ω (C) 0.5 Ω (D) 10 Ω

State the function of former and control spring in PMMC instrument.

Name the material used for :- (i) Moving coil (ii) Permanent magnet in PMMC instrument.

Eddy current damping cannot be used for moving iron instrument because

‘PMMC instrument is not suitable to measure AC quantity’. State the reason.

State working principle of PMMC instrument.

Compare PMMC & MI instrument.

A control system having unit damping factor will give  (1) Oscillatory response (2) Undamped response (3) Critically damped response (4) No response

Ideally, the damping torque should be  (1) Proportional to velocity of the moving system and operating current.  (2) Proportional to the velocity of the moving system but independent of operating current.  (3) Independent of the velocity of the moving system and proportional to the operating current.  (4) Independent of the velocity of the moving system and operating current.

The damping winding in synchronous motor is generally used to?

Given a unity feedback system with G(s)=k/s (s+4), the value of k for damping ratio of 0.5 is

The damping factor of a particular system is unity, the system response will be

What is the definition of a primary instrument?

State the material used for moving coil and former for PMMC instruments.

A Pyrheliometer is an instrument to measure :  (A) temperature of solar photovoltaic cell  (B) intensity of direct solar radiation at normal incidence  (C) intensity of indirect solar radiation  (D) efficiency of a solar photovoltaic cell

Identify the instrument that does not exist (A) Dynamo-meter type ammeter (B) Dynamo-meter type wattmeter (C) Moving-iron voltmeter (D) Moving-iron wattmeter

When the voltage across a battery is measured using a D.C potentiometer, the reading shows 1.08 V. But when the same voltage is measured using a Permanent Magnet Moving Coil (PMMC) voltmeter, the voltmeter reading shows 0.99 V. If the resistance of the voltmeter is 1100 Ohm , the internal resistance of the battery, in Ohm , is (A) 150 (B) 100 (C) 50 (D) 200

List the different methods to produce damping torque.

Describe with neat diagram air friction damping.

Name the different torque and their function in measuring instrument.

Give the classification of the errors used in measuring instrument & state the reason for their occurrence.

State the advantages of instrument transformer in using for extension of range of meters.

State the function of controlling torque in electrical measuring instrument.

The largest change of input quantity for which there is no output of instrument is called ______ A) Dead time B) Dead input C) Dead output D) Dead zone

Describe spring control method of producing controlling torque in measuring instrument. Write any two properties required for spring material.

Explain magnetic effect employed in measuring instrument.

Why energy meter is integrating type measuring instrument?

An instrument which detects electric current is known as?

State the meaning of secondary instrument. Classify secondary instruments.