# Arc resistance

16 views
Arc resistance

(1) increases with increase in arc current (2) decrease with increase in arc current (3) is independent of arc current (4) is independent of arc length

Arc resistance decrease with increase in arc current

## Related questions

Identify the correct combination of respective Electric arc welding and Electric resistance welding methods :  (A) Butt welding and Seam welding  (B) Hydrogen shielding and Projection welding  (C) Seam welding and Coated electrode welding  (D) Coated electrode welding and Hydrogen shielding

For arc welding current range is usually  (1) 10 to 15 A (2) 30 to 40 A (3) 50 to 100 A (4) 100 to 350 A

The arc voltage in a circuit breaker is :

The supply for arc welding is :

Write the purpose of coal and ash handling unit. Also write different activities that arc carried out in this unit.

The arc temperature in Oil Circuit Breaker may reach up to_______.  (A) 5,000° K (B) 8,000° K (C) 10,000° K (D) None of the above

Which of the following is used in a circuit breaker as the medium in which the arc forms? A) Insulating gas B) Insulating oil C) Vacuum D) All the above

What is meant by resistance heating?

What is the mathematical relationship between resistance and conductance?

How does the resistance of a conductor compare to that of an insulator?

Resistance formula

Parallel Reactance and Resistance Example 1

AC Circuits with Resistance but No Reactance

Problems on resistance and resistivity

Problem on temperature coefficient of resistance 3

Problem on temperature coefficient of resistance 2

Problem on temperature coefficient of resistance 1

Problem on resistance and resistivity 13

Problem on resistance and resistivity 12

Problem on resistance and resistivity 11

Problem on resistance and resistivity 10

Problem on resistance and resistivity 9

Problem on resistance and resistivity 8

Problem on resistance and resistivity 7

Problem on resistance and resistivity 6

Problem on resistance and resistivity 5

Problem on resistance and resistivity 4

Problem on resistance and resistivity 3

Problem on resistance and resistivity 2

Problem on resistance and resistivity 1

Name two methods for measurement of low, medium and high resistance. Give one advantage and one limitation of V- I method.

Name the method used to measure following resistances:- (i) Low resistance (ii) Medium resistance (iii) Insulation resistance (iv) Earth resistance.

Write any two factors on which earth resistance depends.

State the use of shunt and series resistance used in extension of meter.

State the range for low and medium resistance.

Explain V- I method of measurement of medium resistance.

Give classification of resistance based on their ranges.

Define pinch off voltage and drain resistance of FET.

Define the following terms as referred to battery. a) E.M.F b) Internal resistance c) Ah efficiency d) WAh efficiency

A resistor in which the resistance changes exponentially with change in temperature is called as A) Potentiometer B) Phototransistor C) Varactor D) Thermistor

If the insulation resistance of a cable of length 10 km is 1 mega ohm, its insulation resistance for 50 km length will be

A 200 V DC machine supplies 20 A at 200 V as a generator. The armature resistance is 0.2 Ohm. If the machine is now operated as a motor at same terminal voltage and current but with the flux increased by 10%, the ratio of motor speed to generator speed is

We connected a 35V dc supply to a resistance of 600 Ohm in series with an unknown resistance R.A. voltmeter having a resistance of 1.2 kOhm is connected across 600 Ohm resistance and read 5v. The value of resistance R will be

A single phase transformer has resistance and reactance of 0.2 pu and 0.6 pu respectively. Its pu voltage regulation at 0.8 pf lagging would he