# In order to regulate steady state error to zero, in a negative feedback control system, one employs

308 views
In order to regulate steady state error to zero, in a negative feedback control system, one employs

In order to regulate steady state error to zero, in a negative feedback control system, one employs Integral control

## Related questions

The steady state error of the system can be minimized by

The steady state stability limit as compared to the transient state stability limit is always

How can the steady-state error in a system be reduced?  (1) By decreasing the type of system (2) By increasing system gain (3) By decreasing the static error constant (4) By increasing the input

A second order system shows 100% overshoot in its unit step response. It can be categorized as (A) underdamped system. (B) overdamped system. (C) Critically damped system. (D) undamped system.

For a feedback control system of type 2, the steady error for a rap input is  A) Infinite B) Constant C) Zero D) Indeterminate

In a control system integral error compensation _______ steady state error.

A transfer function has a second order denominator and constant gain in the numerator

A linear time -invariant control system with unsatisfactory steady state error is to be compensated. Which is/are the correct type of cascade compensation to be provided ? 1. Lead 2. Lag 3. Lag -lead Select the correct answer using the codes given below : (a) 1 only (b) 2 only (c) 3 only (d) 1, 2 and 3

A unity negative feedback control system is found to have a gain margin of 20 dB. The Nyquist plot of the system (A) crosses the real axis at +0.1 (B) crosses the real axis at -0.1. (C) crosses the imaginary axis at -0.1 (D) crosses the imaginary axis at +0.1

Negative feedback in a closed-loop control system DOES NOT (A) reduce the overall gain (B) reduce bandwidth (C) improve disturbance rejection (D) reduce sensitivity to parameter variation

State the meaning of creeping error in 1 phase energy meter.

Cells are connected in series in order to?

By increasing the gain ‘k’ of a system, steady state error of the system (a) increases (b) decreases (c) remains unaffected (d) nothing can be said

If stability error for step input and speed of response be the criteria for design, what controller would you recommend (1) P controller (2) PD controller (3) PI controller (4) PID controller

For a 2nd order feedback control system, the peak resonance magnitude should be Mp ≤ 1.15. Hence the damping ratio (δ) is  (a) 0.1 (d) 0.5 (c) 0.707 (d) 1

What is the steady state error of type-0 system for ramp input?  A) ∞ B) A/K C) A/(1+K) D) 0

The steady state acceleration error of type-1 system is  A) Unity B) Infinity C) Constant D) Zero

True value has been 50 whereas measured value is 40 then the percentage error in the reading will be ______.  (A) 20% (B) 40% (C) 50% (D) 30%

With the knowledge of the state variable representation of a plant the transfer function of the plant

In lag compensator the damping ratio, gain and steady state error (ess) are   (a) Decreases, Decreases and Increases (b) Decreases, Increases and Increases (c) Increases, Increases and Decreases (d) Increases, Decreases and Decreases

What is the channel capacity of a noisy channel with conditional probability of error p = 1/2? A) 0 B) 1 C) Infinity D) 2

In the Bode plot of a unity feedback control system, the value of phase of G(jw) at the gain cross -over frequency is - 125°.. The phase margin of the system is (a) - 125° (b) - 55° (c) 55° (d) 125°

State various effects of electric current and explain any one.

Describe the following errors and their compensation: (i) Phase error (ii) Speed error

What are the types of error?

What is the percentage error when 3 resistors with ratings 100 Ω at 5%, 150 Ω at 6% and 250 Ω at 8% respectively, are connected in series? A) 6.33% B) 6.80% C) 19% D) None of these

What is measurement error ?

In closed loop control system, with positive value of feedback gain the overall gain of the system will

In case of type-1 system steady state acceleration is?

For a stable feedback control system, the phase margin is  a) always positive b) always negative c) may be positive or negative d) always greater than 180o

A plant is modeled as 1/(s(s+3)) with unity feedback control system and a cascade PI controller. How many state variables are required for state model description?   A) 1 B) 2 C) 3 D) 4

The output of a feedback control system must be a function of?

With negative feedback, the system stability and system gain respectively (a) Increases and increases (b) Increases and decreases (c) Decreases and increases (d) Decreases and decreases

The first order control system, which is well designed, has a?

State superposition theorem applied to D.C. circuits.

The open loop control system is one in which _____.

Explain the on state losses in power BJT.

Draw a labeled block diagram of sine wave generator and state function of each block.

A solid state relay (A) withstands voltage transients (B) does not require auxiliary dc supply (C) provide low burden on CT and P (D) does not provide earth fault protection

In a control system the output of the controller is given to?

Velocity error constant of a system is measured when the input to the system is unit _______ function.

The effect of negative feedback on distortion and bandwidth is A) Both distortion and bandwidth get decreased B) Both distortion and bandwidth get increased C) Distortion is reduced and bandwidth is increased D) Distortion is increased and bandwidth is decreased

The error detecting element in a control system gives: - a) the sum of the reference signal and feedback signal b) the sum of the reference signal and error signal c) the difference of the reference signal and feedback signal d) the difference of the reference signal and output signal

A system with gain margin close to unity or a phase margin close to zero is (a) conditionally stable (b) relatively stable (c) highly stable (d) highly oscillatory

When the initial conditions of a system are specified to be zero it implies that the system is?