# In a pure resistive circuit, the average power Pavg is _________ the peak power Pmax.

78 views

In a pure resistive circuit, the average power Pavg is ______ the peak power Pmax.

(1) Double (2) One-half of (3) One-fourth (4) Equal to

In a pure resistive circuit, the average power Pavg is One-half of the peak power Pmax.

## Related questions

In a pure resistive circuit?

What is the power factor of purely resistive circuit.

Pure inductive circuit takes power from the A.C. line when?

In a pure capacitive circuit if the supply frequency is reduced to 1/2, the current will?

In a pure inductive circuit if the supply frequency is reduced to 1/2, the current will?

In a pure inductive circuit?

An independent voltage source in series with an impedance ZS=R+jXS delivers a maximum average power to a load impedance ZL when A) ZL = R B) ZL = jXS C) ZL = R-jXS D) ZL = R+jXS

Pure inductive circuit?

State why nuclear power plants are used as base load plants and diesel power plants as a peak load plant.

An SSB transmitter produces a peak-to-peak voltage of 200 V across a 100 Ω antenna load. What is the Peak Envelope Power? A) 49.98 W B) 79.98 W C) 99.96 W D) 199.93 W

Give the circuit analysis of current source inverter with resistive load. What are the main difference between voltage source inverter and current source inverter?

The apparent power drawn by an A.C. circuit is 10 kVA and active power is 8 kW. The reactive power in the circuit is?

A 3-phase voltage source inverter operates in 180° conduction mode with a star connected resistive load. If input dc voltage is 100 V, then the peak to peak output line voltage is :

In an A.C. circuit power is dissipated in?

The power factor at resonance in R-L- C parallel circuit is?

A snubber circuit is connected to the power semiconductor device to reduce the (A) turn-on time (B) turn-off time (C) electrical stresses (D) thermal resistance

The power factor of a D.C. circuit is always?

The input of an A.C. circuit having power factor of 0.8 lagging is 40 kVA The power drawn by the circuit is?

How do you find power in a circuit?

An A.C. voltage is impressed across a pure resistance of 3.5 ohms in parallel with a pure inductance of impedance of 3.5 ohms?

Power factor of an inductive circuit is usually improved by connecting capacitor to it in?

What is drive circuit in power electronics?

The average time required to reach a storage location in the memory to read or retrieve the contents of memory is called as A) Turnaround time B) Latency time C) Access time D) Response time

In which of the following waveforms is RMS voltage equal to the average voltage? A) Triangle wave B) Square wave C) Sine wave D) None of these

A single core cable is designed to work for a single phase system with a peak voltage of 220 kV. The maximum permissible stress in the dielectric is not to exceed 20 kV/mm. For economical size, the overall core diameter of the cable is (A) 28.2 mm (B) 26.4 mm (C) 24.4 mm (D) 22.0 mm

List any two methods of reactive power measurement in 3 phase circuit.

Explain power relations in three phase circuit.

Explain power in single phase AC circuit.

In the case of an unsymmetrical alternating current the average value must always be taken over?

A single-phase voltage source square -wave inverter feeds pure inductive load. The waveform of the load current will be

Power factor of an electrical circuit is equal to?

The r.m.s. value of pure cosine function is?

The average life of neutrons after they decay is

State maximum power transfer theorem for DC circuit.

What is crest factor (peak factor)? A) It is the ratio of the maximum amplitude to average value B) It is the ratio of the average amplitude and RMS value C) It is the ratio of the maximum amplitude to RMS value D) None of these

Compare base load plant with peak load plant on any two points.

Define form factor and peak factor.

A d.c. source has an open circuit voltage of 30 V and an internal resistance of 1.5 Ohm. A resistive load is connected to the source. Maximum power dissipated in the load is (A) 300 W (B) 150 W (C) 45 W (D) 20 W

Average rectified value

Average value

Define average value.