# In a synchronous machine, if the field flux axis ahead of the armature field axis in the direction of rotation,

27 views
In a synchronous machine, if the field flux axis ahead of the armature field axis in the direction of rotation, the machine is operating as

(1) synchronous motor (2) synchronous generator (3) asynchronous motor (4) asynchronous generator

In a synchronous machine, if the field flux axis ahead of the armature field axis in the direction of rotation, the machine is operating as synchronous generator

## Related questions

How can we reverse the direction of rotation of synchronous motor?

The armature current on symmetrical 3 phase short circuit of a synchronous machine (salient pole)  (A) has q -axis current only (B) has d -axis current only (C) has both d and q axis currents (D) cannot be divided between q and d axis currents

The induced emf in the armature of a lap -wound four -pole dc machine having 100 armature conductors rotating at 600 rpm and with 1 Wb flux per pole is  (1) 1000V (2) 100V (3) 600V (4) 10,000V

The direction of rotation of an inverter fed 3-phase ac motor is reversed by (A) a mechanical reversing switch (B) reversing the input dc link voltage (C) operating the inverter as a rectifier (D) changing the sequence of switching

Aluminium is not used as winding wire for the armature of a dc machine because  (1) aluminium has low resistivity (2) a large winding space is taken by aluminium conductors and creates jointing problems (3) the thermal conductivity of aluminium is low (4) aluminium has low conductivity as compared to copper

A 200 V DC machine supplies 20 A at 200 V as a generator. The armature resistance is 0.2 Ohm. If the machine is now operated as a motor at same terminal voltage and current but with the flux increased by 10%, the ratio of motor speed to generator speed is

The armature reaction in a synchronous generator supplying leading power factor load is (A) magnetizing (B) demagnetizing (C) demagnetizing and cross-magnetizing (D) magnetizing and cross-magnetizing

What is the direction of the induced electric field?

What is the direction of the electric field?

If we change the excitation of synchronous machine will it affect on power factor?

If we change the excitation of synchronous machine will it affect on motor speed?

If the field of synchronous motor is under excited, power factor will be?

Give the relation between magnetic field strength, magnetic flux density and permeability.

It is possible to increase the field flux and, at the same time, increase the speed of a d.c. motor provided its .......... is held constant.

Torque angle for the synchronous machine is the angle between (A) stator magnetic field and rotor magnetic field (B) stator magnetic field and net magnetic field in the air gap (C) rotor magnetic field and net magnetic field in the air gap (D) excitation voltage and impedance voltage drop

The 'Equal area criterion' for the determination of transient stability of a synchronous machine connected to an infinite bus  (1) ignores line as well as synchronous machine resistance and shunt capacitances.  (2) assumes accelerating power acting on the rotor as constant.  (3) ignores the effect of voltage ... inherent damping present in the machine.  (4) takes into consideration the possibility of machine losing synchronism after it has survived during the first swing.

During a disturbance on a synchronous machine, the rotor swings form A to B before finally setting down to steady state at point C on the power angle curve. The speed of the machine during oscillation is synchronous at point(s)

V - curve of synchronous machine shows the relation between?

Which machine is the exciter of synchronous machine?

Why synchronous machine is called doubly excited machine?

In an induction motor if the flux density is reduced to one-half, of its normal value then the torque will  (1) reduce to one-half (2) reduce to one-fourth (3) remain unchanged (4) increase four times

how can we reverse the direction of rotation of three phase induction motor ?

The maximum reluctance power of a salient-pole synchronous motor having direct-axis reactance, 1.0 pu and quadrature-axis reactance, 0.5 pu, and input voltage, 1.0 pu is (A) 0.25 pu (B) 0.5 pu (C) 1.0 pu (D) 1.5 pu

lf the poles of system are lying on the imaginary axis in s-plane, then the system will be

Center of gravity of a solid cone lies on the axis at the height?

In a synchronous generator if the excitation increased from a low value to normal value, with a fixed load  (A) The armature current increases and the power factor decreases  (B) The armature current decreases and the power factor also decreases  (C) The armature current decreases and the power factor increases but is lagging  (D) The armature current decreases and the power factor increases and is leading

In dc machines, the armature windings are placed on the rotor because of the necessity for  (1) electromechanical energy conversion (2) generation of voltage (3) commutation (4) development of torque