# Capacitance is the ability of a body to store an__________.

22 views
Capacitance is the ability of a body to store an__________.

(A) electrical charge (B) electric current (C) voltage (D) All of the above

Capacitance is the ability of a body to store an electrical charge

## Related questions

The weight of a body is due to

If a suspended body is struck at the center of percussion, then the pressure on die axis passing through the point of suspension will be?

If a rigid body is in equilibrium under the action of three forces, then?

Which of the following can be used to measure the capacitance of a capacitor? A) Rheostat B) Schering bridge C) Wheatstone bridge D) None of these

What is the capacitance when a capacitor passes a current of 31.43 mA when supplied with 40 V AC with a frequency of 1000 Hz? A) 0.125 F B) 0.125 μF C) 1257.2 μF D) None of these

A force acting on a body may?

What is meant by body effect in MOSFET?

When does the Body bias effect occur in an n-channel MOSFET?  A) When the Source voltage is less the Bulk voltage B) When the Source voltage is equal to or greater the Bulk voltage C) When the Drain voltage is equal to the Bulk voltage D) When the Gate voltage is equal to the Bulk Voltage

A diode in which the change in reverse bias voltage varies the capacitance is called as A) Varactor diode B) Switching diode C) Tunnel diode D) Zener-diode

The time constant of the capacitance circuit is defined as the time during which voltage?

What is the reciprocal of capacitance?

A suspension type insulator has 2 units with self capacitance C and ground capacitance of 0.2 C. Each unit can withstand for a maximum voltage of 11 kV. Its string efficiency is  (A) 78% (B) 82% (C) 80% (D) 84%

For 11 kV line the capacitance per km per phase will be of the order of:  (A) 1 Farad (B) 0.1 Farad (C) 0.01 Farad (D) 0.01 microF

Energy stored in electrostatic field of capacitance formula

What is capacitance?

Capacitance

According to principle of transmissibility of forces, the effect of a force upon a body is?

Impulse testing of transformers is done to determine the ability of: A) bushings to withstand vibrations B) insulation to withstand transient voltages C) windings to withstand voltage fluctuations D) all of the above

The ability of materials to become polarized under an applied electric field is called _______ A) Ferroelectricity B) Paraelectricity C) Polectricity D) None of these

Which is used to store critical pieces of data during subroutines and interrupts: (A) Stack (B) Queue (C) Accumulator (D) Data register

If temperature of a radiating body is 1500 °C, the wavelength at which maximum radiant energy occurs is (a) 2.87 µm (b) 1.63 µm (c) 1.01 µm (d) 20.85 µm

If a positively charged body is placed inside a spherical hollow conductor, what will be the polarity of charge inside and outside the hollow conductor ? (a) Inside positive, outside negative (b) Inside negative, outside positive (c) Both negative (d) Both positive

What is the approximate value of average resistance of a human body ?   (a) 1 kΩ (b) 5 kΩ (c) 10 kΩ (d) 15 kΩ

A capacitor of capacitance 50 micro farads is charged to a potential difference of 200 Volts. Find out energy stored in the condenser?

In a 3-insulator string voltage distribution system the ratio of capacitance between pin and earth to the self capacitance of each unit is 1/4. If the potential across the top unit is 8 kV, then the string voltage is (A) 22.5 kV (B) 24 kV (C) 26 kV (D) 32.5 kV

To a highly inductive circuit, a small capacitance is added in series. The angle between voltage and current will _____.

A series RLC circuit resonate at 200 Hz. If the capacitance is increased to four times, the circuit will be in resonance at   (a) 100 Hz (b) 200 Hz (c) 400 Hz (d) 800 Hz

What happens to the angle between current and voltage, when a small capacitance is added in series with a highly inductive circuit?  (A) Increases (B) Remains same as earlier angle (C) Decreases (D) Becomes indeterminant

The capacitance of the capacitor is directly proportional to the

What happens to the capacitance if mica is inserted between the plates of an air capacitor? A) The capacitance increases B) The capacitance decreases C) The capacitance remains the same D) The capacitance becomes zero

When a body reflects all the radiations incident on it, then the body is known as   (a) White body (b) Grey body (c) Black body (d) Transparent body

The body effect in the MOS technology refers to  (A) size of the drain on the drain current  (B) doping of the drain on the drain current  (C) effect of the reverse bias voltage between source and body on the drain current  (D) effect of the reverse bias voltage between drain and body on the drain current

Which type of protection is provided on a generator to protect against stator insulation failure? A) Differential protection B) Overcurrent relay C) Thermocouple actuated alarm D) Reverse power relay

An IDMT relay of rating 5A, 2.2s and having a relay setting of 125% is connected to a supply circuit through a CT having a ratio of 400/5. The plug setting multiplier of IDMT relay in the event of fault current of 4000 A will be a. 5 b. 8 c. 10 d. 125

A relay has a rating of 5 A, 2.2 sec IDMT and a relay setting of 125% TMS = 0.6. It is connected to a supply circuit through a C.T. 400/5 ratio. The fault current is 4000 A. The operating current of the relay is

The capacitance of a capacitor is not affected by (a) Plate area (b) Plate separation (c) Nature of dielectric (d) Plate thickness

In a parallel plate capacitor of capacitance Co, the electric field is E. If a dielectric slab with dielectric constant = 7 is introduced to fill capacitor completely, the electric field will become (a) 7E (b) E/7 (c) E/3.5 (d) E. Co

Timing resistor of a monostable using 555 is 100 kOhm. The timing capacitance (in nF) required for pulsewidth of 100mS is about  A) 100 B) 300 C) 600 D) 900

To prevent mal-operation of differentially connected relay while energizing a transformer, the relay restraining coil is based with  (1) second harmonic current  (2) third harmonic current  (3) fifth harmonic current  (4) seventh harmonic current

State the effects of errors in dynamometer type wattmeter due to i) pc- inductance ii) pc- capacitance iii) mutual inductance iv) Connection.