The number of insulator discs (each rated 11 kV) required in a suspension type insulator string

35 views
The number of insulator discs (each rated 11 kV) required in a suspension type insulator string of 220 kV line is

The number of insulator discs (each rated 11kV) required in a suspension type insulator string of 220 kV line is 16

Related questions

A suspension type insulator has 2 units with self capacitance C and ground capacitance of 0.2 C. Each unit can withstand for a maximum voltage of 11 kV. Its string efficiency is  (A) 78% (B) 82% (C) 80% (D) 84%

The voltages across various discs of suspension insulators having identical discs are different due to:  (A) Surface leakage currents  (B) Series capacitance of lines  (C) Shunt capacitance to ground  (D) Series and shunt capacitances

How many insulator disc used for 33 kV transmission voltage line?

The number of comparators required in a 4 bit comparator type ADC is (A) 16 (B) 15 (C) 17 (D) 12

How does the resistance of a conductor compare to that of an insulator?

State functions of ; i) Cable box ii) Guard wire iii) Shackle insulator iv) Stay wire used in service connection

What is the difference between an insulator and a dielectric?

A suspension insulator string has three units with ground capacitance of 0.2 C and self capacitance of C. Its string efficiency is (a) 75% (b) 78% (c) 80% (d) 85%

List any four errors in induction type energy meter. Give method of compensation for each.

What is another name for an insulator?

what is insulator ?

If 5000 kW power is transmitted at 220 kV in place of 11 kV, reduction in the value of electric current will be (a) 90% (b) 95% (c) 5% (d) 10%

A suspension type insulator has three units with self-capacitance C and ground capacitance of 0.2 C having a string efficiency of   (a) 80% (b) 82% (c)78% (d) 76%

A transmission line has 1 P.0 impedance on a base of 11 KV, 100 MVA. On a base of 55 KV. it will have a P.0 impedance of

In a string of suspension insulators, the voltage distribution across the different units of a string could be made uniform by the use of a grading ring, because it?

For 11 kV line the capacitance per km per phase will be of the order of:  (A) 1 Farad (B) 0.1 Farad (C) 0.01 Farad (D) 0.01 microF

In the induction type directional over current relay, when a short-circuit occurs in the circuit (A) power flows in reverse direction (B) power flows in normal direction (C) directional power element does not operate (D) over current element is not energized

State the function and shape of following parts used in induction type energy meter: i) Series magnet ii) Shunt magnet iii) Al disc iv) Brake magnet

State the effects of errors in dynamometer type wattmeter due to i) pc- inductance ii) pc- capacitance iii) mutual inductance iv) Connection.

The operation of a ramp type Digital Voltmeter is based on the principle of (A) Voltage-to-current conversion. (B) Voltage-to-time conversion. (C) Current-to-time conversion. (D) Current-to-frequency conversion.

The number of comparators required in a 3-bit comparator type analog to digital converter is  A) 2 B) 3 C) 7 D) 8

In a 3-insulator string voltage distribution system the ratio of capacitance between pin and earth to the self capacitance of each unit is 1/4. If the potential across the top unit is 8 kV, then the string voltage is (A) 22.5 kV (B) 24 kV (C) 26 kV (D) 32.5 kV

What type of biasing is used in CE amplifier?

Which type of motor is used in lift?

Explain the essential toques in analog type measuring instruments.

What type of insulator will be used if the direction of the transmission line is to be changed?

With a neat sketch explain working of 1 phase dynamometer type power factor meter.

Draw a neat sketch of 1-ph induction type energy meter and write operating principle of it.

A piezo-electric type pressure sensor has a sensitivity of 1 mV/kPa and a bandwidth of 300 Hz to 300 kHz. For a constant (dc) pressure of 100 kPa, the steady state output of the sensor in millivolt is (A) 0 (B) 2 (C) 4 (D) 6

A 50 Hz, 4 pole turboalternator rated at 20 MVA. 13.2 KV has an inertia constant H = 4 KW sec/KVA. The K.E. stored in the rotor at synchronous speed is

Draw the diagram and explain the working of ferrodynamic type frequency meter.

Describe the operation of N channel enhancement type MOSFET with diagram.

Which is the most common type of fault?

Which type of starter is used to start the DC motor?

What is the most common type of power plant?

The inertia constant of a 100 MVA, 11 kV water wheel generator is 4. The energy stored in the rotor at the synchronous speed is: A) 400 Mega Joule B) 400 Kilo Joule C) 25 Mega Joule D) 25 Kilo Joule

A thyrite type lightening arrester :

With diagram explain bottoming cycle type of co-generation.

Describe principle of operation of Doppler type ultrasonic flow meter with diagram.

With neat sketch explain working of Weston type synchroscope.