# Gearing, blacklash, friction between moving parts and scale accuracies are generally known as

11 views
Gearing, blacklash, friction between moving parts and scale accuracies are generally known as

(a) Instrument errors (b) Interference errors (c) Calibration errors (d) Interaction errors

Gearing, blacklash, friction between moving parts and scale accuracies are generally known as Instrument errors

## Related questions

The ratio of limiting friction and normal reaction is known as?

Angle between the shear plane and work surface is known as : (A) lip angle (B) rake angle (C) cutting angle (D) shear angle

A permanent magnet moving coil ammeter has a coil resistance of 99 ohm and Full Scale Deflection (FSD) current of 0.1mA. Shunt resistance is 1 ohm. Current through the meter at 0.5 F.S.D is:

A moving coil instrument has a resistance of 10 W and gives full scale deflection when carrying a current of 50 mA. To measure current upto 100 A, we will have to connect • 10 W resistance in series • 10 W resistance in parallel • 10/1999 W resistance in series • 10/1999 W resistance in parallel

A moving coil meter has a resistance of 3 Ω and gives full scale deflection with 30 mA. To measure voltage up to 300 V, the external resistance to be connected in series with the instrument is (A) 9997 Ω (B) 10000 Ω (C) 997 Ω (D) 10003 Ω

The main sources of Errors in Permanent Magnet moving Coil (PMMC) are due to : - a) weaking of the permanent magnet due to aging at temperature effects b) weaking of spring due to aging and temperature effects c) change of resistance of the moving coil with temperature d) all the above

The real and imaginary parts of a complex analytic function are (A) both non-zero (B) periodic (C) orthogonal (D) either of them is zero

A moving coil instrument of resistance 5 Ohm requires a potential difference of 75 mV to give a full scale deflection. The value of shunt resistance needed to give a full scale deflection at 30 A is

Material which lack permanent magnetic dipoles are known as: (1) Paramagnetic (2) Diamagnetic (3) Ferromagnetic (4) Ferrimagnetic

Which of the following are known as the short circuit parameters of a 2- port network? (A) Z- parameters. (B) H- parameters. (C) Y- parameters. (D) A,B,C,D, parameters.

Materials having a high dielectric constant, which is non-linear are known as (a) Super dielectrics (b) Elastomers (c) Ferromagnetics (d) Hard dielectrics

Bold, Italic, Regular are known as  (1) font styles (2) font effects (3) word art (4) text effects

The circuit whose properties are same in either direction is known as?

Information that a computer produces and delivers back to the user is known as ____.  a) Input b) Output c) Both (a) and (b) d) None of the above

Memory that temporarily stores data and that can be erased or changed is known as  a) Cache Memory b) Read Only Memory c) Flash Memory d) Random Access Memory

A synchronous motor at no load condition is known as synchronous condenser and improves the (a) stability (b) efficiency (c) power factor (d) frequency of the integrated system

What is the ratio of resistance and impedance better known as ? (A) Peak factor (B) Pitch factor (C) Power factor (D) Form factor

The circuit has resistors, capacitors and semi-conductor diodes. The circuit will be known as

Coulomb friction is the friction between?

Two voltmeters of same range, one moving iron type and other permanent magnet moving coil type, are connected in parallel for measuring a.c. supply voltage. If the reading of MI type is 300V, the reading of PMMC type will be (a) zero (b) higher-than M.I. type (c) lower than M.I. type (d) same

The distance between two coil sides which are connected to the same commutator segment is called as  (1) winding pitch (2) back pitch (3) front pitch (4) full pitch

Twelve 1 ohm resistances are used as edge to form a cube. The resistance between two diagonally opposite corners of the cube is:  (1) 5/6 ohm (2) 1 ohm (3) 6/5 ohm (4) 3/2 ohm

Moving coil in dynamometer wattmeter connected : - a) in series with fixed coil b) across supply c) in series with load d) across load

In order to quench the are quickly and also optimize the dimensions generally   (a) Air blast C.B. is preferred (b) Oil C.B. is preferred (c) SF6 C.B. is preferred (d) Minimum oil C.B. is preferred

With the help of which bridge are the capacitance and dielectric loss of a capacitor generally measured ?

The formula to find I when the values of V and R are known is? A.I = VR B.I = R/V C.V = IR D.I = V/R

A thermistor is generally a semiconductor material exhibits: a) Positive Temperature co -efficient b) Negative Temperature co -efficient c) Neither positive nor negative temperature co -efficient d) both (a) and (b)

Dynamic friction as compared to static friction is?

What are the parts of AC motor?

What are the main parts of a generator?

Which layer functions as a liaison between user support layers and network support layers?  A) Network layer B) Physical layer C) Transport layer D) Session layer

If 27 J of energy is expended in moving 3 C of charge between two points, how much voltage is there between those two points?

Sample -and -hold circuits in ADCs are designed to : - a) sample and hold the output of the binary counter during the conversion process b) stabilize theAD Cs threshold c) voltage during the conversion process stabilize the input analog d) signal during the conversion process sample and hold the ADC staircase waveform during the conversion process

Data Acquisition system are used to measure and record analog signal in different ways i.e. : -  a) Signals which originates from direct measurement of electrical quantities b) Signals which originate from the use of transducer. c) Signals which oscillates in simple harmonic motion and dies out slowly. d) Both (a) and (b)

State the function and shape of following parts used in induction type energy meter: i) Series magnet ii) Shunt magnet iii) Al disc iv) Brake magnet

State the four major parts of Transformer and material used for their construction.

The friction losses in Real Transformers are :  (A) 0% (B) 5% (C) 25% (D) 50%