# A synchronous motor operates at 0.8 pf lagging. If the field current of the motor is continuously

17 views
A synchronous motor operates at 0.8 pf lagging. If the field current of the motor is continuously increased

1. The power factor decreases upto a certain value of field current and thereafter it increases.

2. The armature current increases upto a certain value of field current and thereafter it decreases.

3. The power factor increases upto a certain value of field current and thereafter it decrease

4. The armature current decreases upto a certain value of field current and thereafter it, increases.

From these, the correct answer is (a) 1, 2 (b) 3, 4 (c) 1, 3 (d) 2, 4

A synchronous motor operates at 0.8 pf lagging. If the field current of the motor is continuously increased

1. The power factor decreases upto a certain value of field current and thereafter it increases.

2. The armature current increases upto a certain value of field current and thereafter it decreases.

3. The power factor increases upto a certain value of field current and thereafter it decrease

4. The armature current decreases upto a certain value of field current and thereafter it, increases.

From these, the correct answer is (a) 1, 2 (b) 3, 4 (c) 1, 3 (d) 2, 4

## Related questions

A 12 -pole, 440 V, 50 Hz, 3 -phase synchronous motor takes a line current of 100 A at 0.8 pf leading. Neglecting losses, the torque developed will be

An induction motor operating at 0.8 pf lagging is consuming 300 kW. A zero real power consuming synchronous motor is connected across the induction motor to raise the pf to 0.92 lagging. The reactive power drawn by the synchronous motor is a. - 352 kVAR b. - 225 kVAR c. - 127.8 kVAR d. - 97.2 kVAR

A 400 V, 50 Hz 30 hp, three-phase induction motor is drawing 50 A current at 0.8 power factor lagging. The stator and rotor copper losses are 1.5 kW and 900 W respectively. The friction and windage losses are 1050 W and the core losses are 1200 W. The air-gap power of the motor will be (A) 23.06 kW (B) 24.11 kW (C) 25.01 kW (D) 26.21 kW

A 200 V, 50 Hz inductive circuit takes a current of 10 A at 30 degree lagging pf, what is the inductive reactance of the circuit?  (A) 17.8 Ω (B) 100 Ω (C) 178 Ω (D) 10 Ω

An alternator is delivering rated current at rated voltage and 0.8 power-factor lagging. For delivering rated current at rated voltage and 0.8 poWer—factor leading, the required excitation will be:  (A) less  (B) more (C) more or less (D) the same

The efficiency of a transformer at full load 0.8 p.f lagging is 90%. Its efficiency at full load 0.8 p.f leading will be (1) Less than 90% (2) More than 90% (3) 90% (4) None of these

A three phase transmission line delivers a load of 5 MW at 0.8 power factor lagging. Resistance of each conductor is 0.5 ohm / km. Receiving end voltage is 33 kV. If the line loss is not to exceed 10%, determine the length of the line.  (A) 7 km (B) 27.9 km (C) 56.8 km (D) 13.9 km

The input of an A.C. circuit having power factor of 0.8 lagging is 40 kVA The power drawn by the circuit is?

A salient pole synchronous motor is running at no load. Its field current is switched off, the motor will (a) come to stop. (b) continue to run at synch. speed. (c) continue to run at a speed slightly less than synch. speed. (d) continue to run at a speed slightly more than the synch. speed.

The maximum possible power of a 3-phase synchronous motor with synchronous reactance 0.8 p.u. connected to a bus-bar of 1.0 p.u. and excitation adjusted to 1.2 p.u. is (A) 0.5 p.u. (B) 0.96 p.u. (C) 1.5 p.u. (D) 1.8 p.u.

A synchronous generator is feeding a zero power factor (lagging) load at rated current. The armature reaction is  (A) magnetizing (B) demagnetizing (C) cross-magnetizing (D) ineffective

The armature resistance of a permanent magnet dc motor is 0.8 Ohm. At no load, the motor draws 1.5 A from a supply voltage of 25 V and runs at 1500 rpm. The efficiency of the motor while it is operating on load at 1500 rpm drawing a current of 3.5 A from the same source will be  (A) 48.0% (B) 57.1% (C) 59.2% (D) 88.8%

A shunt motor rotating at 1500 r/min is fed by a 120 V source. The line current is 51 A and the shunt field resistance is 120 ohm. If the armature resistance is 0.1 ohm, calculate the current in the armature.  (A) 1 A (B) 51 A (C) 50 A (D) 12 A

A synchronous motor is delivering 80% of its rated output and is operating at UPF. If its excitation is increased, then  (1) the output delivered gets increased (2) its pf becomes lagging (3) the output delivered gets decreased (4) its pf becomes leading

The voltage regulation for 0.95 lead pf is zero for an alternator. If so, the voltage regulation for 0.9 lead pf with all other conditions remaining same will be (A) Positive (B) Negative (C) Zero (D) Insufficient data

An 8 pole lap wound DC shunt generator is supplying 295A to a load. The field current of the generator is 5A. The current per parallel path is: -  a) 300A b) 200A c) 150A d) 37.5A

A cumulative dc compound motor runs at 1500 rpm. on full load. If its series field is short-circuited, its speed  (1) becomes zero (2) remains unchanged (3) increases (4) decreases

A 200 V dc motor takes a field current of 2 A to generate a back emf of 180 V. If the field winding resistance is 80 Ω, the resistance of the shunt field regulator is (A) 10 Ω (B) 20 Ω (C) 100 Ω (D) 180 Ω

If the field of synchronous motor is under excited, power factor will be?

A single phase 60 Hz generator supplies an inductive load of 4500kW at a power factor of 0.80 lagging by means of a 20 km long overhead transmission line. The line resistance and inductance are 0.0195 ohm and 0.60 mH per km. The voltage at the receiving end is required to be kept constant at 10.2 kV. Find the voltage regulation of the line.  (A) 12.59% (B) 16.34% (C) 32.68% (D) 41.15%

If a four pole synchronous generator driven at 1500 rpm feeds a 6-pole induction motor, which is loaded to run at a slip of 5%, then speed of the motor will be   (a) 1000 rpm (b) 950 rpm (c) 1500 rpm (d) 1450 rpm

A motor which can conveniently be operated at lagging as well as leading power factors is the:   (A) squirrel cage induction motor (C) synchronous motor (B) wound rotor induction motor (D) DC shunt motor

A 150 kW electric motor has an efficiency of 92 %, when it operates at full load. Calculate the losses in the machine.  (A) 92 kW (B) 150 kW (C) 163 kW (D) 13 kW

The torque developed by any 3-phase induction motor at 0.8 p.u. slip is (A) Full-load torque (B) unstable torque (C) starting torque (D) break down

In a d.c. series motor, the torque developed is 20 Nm at 10A. If the load current is doubled, the new torque will be : -  a) 60 Nm b) 45 Nm c) 80 Nm d) 100 Nm

The synchronous speed of an 8 pole induction motor supplied power from a 50 Hz source will be ?

When a synchronous motor is started, the field winding is initially :  a)excited by a d.c. sources b) short circuited c) open circuited d) none of these

For a fault at terminals of the synchronous generator, the fault current is maximum for a:  (A) Three phase fault (B) Double line to ground fault (C) Line to line fault (D) Line to ground fault

DC ammeter has a resistance of 0.1 Ω and its current range is 0-100 A. If the range is to be extended to 0-300 A, what shunt resistance need to be connected?  A) 0.025 Ω B) 0.05 Ω C) 0.015 Ω D) 0.03 Ω

A 100 pF capacitor has a maximum charging current of 150 μA.What is the slew rate ? (A) 1.5 V/μs (B) 1.05 V/μs (C) 0.15mV/s (D) 10.5 mV/s

If shunt generator delivers 100 A at 200 V, and the resistance of the shunt field and armature are 100 ohm and 0.01 ohm respectively, the generated e.m.f. will be : -  a) 212 V b) 205 V c) 210 V d) 201.02 V

Suggest the energy conservation techniques in following cases : (i) Motor is running with 70% loaded condition. (ii) Motor is continuously loaded at 50%. (iii) Motor runs with 30% loaded condition but sometimes rises to 50% loading condition. (iv) Motor runs continuously under no-load condition.

A 1000W heater is rated to operate at a direct current (DC) of 10A. If the heater is supplied alternating current (AC) for producing the same quantity of heat the value of current should be  a. Iav=10A b. Irms=10A c. Ipeak=10A

In a synchronous machine, if the field flux axis ahead of the armature field axis in the direction of rotation, the machine is operating as  (1) synchronous motor (2) synchronous generator (3) asynchronous motor (4) asynchronous generator

The capacitance of 0-1000V electrostatic voltmeter increases from 36-42 pF from zero to full scale deflection. It is required to extend the range of voltmeter to 10000 V by using an external series capacitor. What should be the value of series capacitor?  (A) 0.8 pF (B) 1.00 pF (C) 6.644 pF (D) 4.667 pF

A synchronous motor at no load condition is known as synchronous condenser and improves the (a) stability (b) efficiency (c) power factor (d) frequency of the integrated system

A 4 pole lap wound dc shunt motor rotates at the speed of 1500 rpm, having a flux of 0.4 mWb and total number of conductors 1000. The value of e.m.f. will be:  (A) 100 Volts (B) 0.1 Volts (C) 1 Volts (D) 10 Volts

If the supply frequency of a 3-phase induction motor is ‘f’, then frequency of rotor emf at motor slip ‘s’ will be   (a) sf (b) (1 – s)f (c) f/s (d) None of these

A separately excited dc generator is running at rated speed and at no load. If its field winding is suddenly connected to a dc source then rise in armature generated voltage is governed by (1) Armature time constant (2) Field time constant (3) Both (a) and (b) (4) Mechanical time constant

The magnetic field intensity at the centre of a current carrying coil of diameter J m is K. The current flowing in the coil is

If the load current and flux of a DC motor are held constant, and voltage applied across its armature is increased by 10%, its speed will:  (A) Decrease by 10%. (B) Remain unchanged. (C) Increase by 10%. (D) Increase by 20%.

A synchronous motor works as synchronous condenser when it operates (a) under excited with leading power factor (b) normal excited with unity power factor (c) over excited with leading power factor (d) over excited with lagging power factor

If resistance is 8 Ohm and current is 16 ampere then what will be the voltage and power?