# Norton's equivalent of a circuit consists of a

10 views
Norton's equivalent of a circuit consists of a

1. Constant current generator with parallel impedance

2. Constant current generator in series with an infinite resistance

3. Constant current generator in parallel with high impedance

4. Constant current generator in series with low impedance

Norton's equivalent of a circuit consists of a Constant current generator with parallel impedance

## Related questions

Application of Norton's theorem to a circuit yields?

A star circuit has element of resistance R/2. The equivalent delta elements will be?

A network consists of several inductances connected in parallel. The equivalent inductance of the network is given by (A) the sum of the individual inductances. (B) the reciprocal of the sum of the individual inductances. (C) the sum of the reciprocals of individual inductances. (D) the reciprocal of the sum of reciprocals of individual inductances.

Norton’s theorem states that a complex network connected to a load can be replaced with an equivalent impedance (A) in series with a current source (B) in parallel with a voltage source (C) in series with a voltage source (D) in parallel with a current source

A tree of a network graph consists of (A) (n-1) nodes (B) n branches (C) one or two nodes left in isolated position (D) no closed paths

Application of Norton's theorem to a circuit yields : (A) Equivalent current source only (B) Equivalent voltage source only (C) Equivalent voltage source and impedance in series (D) Equivalent current source and impedance in parallel

The 'h' parameter equivalent circuit of a junction transistor is valid for   (A) High frequency, large signal operation (B) High frequency, small signal operation (C) Low frequency, large signal operation.

The two basic components of a Thevenin equivalent ac circuit are the equivalent voltage source and the equivalent: A. Series impedance B. Series resistance C. Parallel impedance D. Parallel resistance

In the equivalent circuit of a 3-phase induction motor, the mechanical load on the motor can be represented by a resistance of value (1) R2 (2) R2/S (3) R2(1-S)/S (4) (R2/S)+1

If each branch of a Delta circuit has impedance √3 Z, then each branch of the equivalent Y circuit has impedance:  (A) Z/√3 (B) 3Z (C) 3√3Z (D) Z/3

Can we apply Norton's theorem in an AC circuit?

Millman's theorem yields equivalent  (1) Impedance or Resistance (3) Voltage source (2) Current source (4) Voltage or Current source

While calculating Rth in Thevenin's theorem and Norton equivalent?

In a series RLC circuit at resonance, the magnitude of the voltage developed across the capacitor  A) Is always zero B) Can never be greater than the input voltage C) Can be greater than the input voltage, however, it is 90° out of phase with the input voltage D) Can be greater than the input voltage, and is in phase with the input voltage

Which of the following are known as the short circuit parameters of a 2- port network? (A) Z- parameters. (B) H- parameters. (C) Y- parameters. (D) A,B,C,D, parameters.

Three capacitors 15µf, 18µf and 12µf are connected in a circuit. Find equivalent capacitance when they are connected in – 1) Series 2) Parallel

What does the shunt resistance component in the equivalent circuit of an Induction motor represent ? (A) Windage and frictional loss only (B) Core losses only (C) Core, windage and frictional loss (D) Copper losses in rotor

A voltage signal 10 Sinwt is applied to the circuit with ideal diodes, as shown in figure. The maximum and minimum values of the output waveform vout of the circuit are respectively

A unit step voltage is applied at t = 0 to a series RL circuit with zero initial conditions  A) It is possible for the current to be oscillatory B) The voltage across the resistor at t = 0+ is zero C) The energy stored in the inductor in the steady state is zero D) Theresistor current eventually falls to zero

The switch in the circuit has been closed for a long time. It is opened at t = 0. At t = 0+, the current through the 1 micro farad capacitor is A) 0A B) 1A C) 1.25A D) 5A

In a series RLC circuit operating below the resonant frequency the current  (a) I leads Vs (b) I lags Vs (c) I is in Phase with Vs (d) None of these

In a pure resistive circuit, the average power Pavg is ______ the peak power Pmax. (1) Double (2) One-half of (3) One-fourth (4) Equal to

A DC voltage source is connected across a series RLC circuit. Under steady-state conditions, the applied DC voltage drops entirely across the

In a series RLC high Q circuit, the current peaks at a frequency  (1) equal to the resonant frequency (2) greater than the resonant frequency (3) less than the resonant frequency (4) equal to half the resonant frequency

In a series parallel circuit, any two resistances in the same current path must be in?

What is a node in an electrical circuit?

The number of chords in the graph of the given circuit will be

A balanced three phase Delta connected load consists of three resistances each of four ohm's connected to a 400 V 3 phase 50 Hz supply. Find 1) phase voltage, 2) phase current, 3) line current, 4) power consumed.

In practice, a current source inverter consists of an AC/ DC converter with a large inductance ‘L’ in the output. This inductance maintains a ……… …………through the switching devices over short interval of time. A) constant current B) constant voltage C) constant power D) none of the (A), (B), (C)

A homo-polar HVDC link consists of (A) single-conductor with positive polarity (B) two conductors with one positive and another negative polarity (C ) two conductors having the same polarity with a ground return (D) single conductor with negative polarity and ground as positive polarity

A network that consists of at least a voltage source or current source is called A) Active network B) Ideal network C) Sourced network D) Outsourced network

A Decision Support System (DSS) consists of  (1) More DML, less DQL (2) More DQL, less DML (3) Half DML, half DQL (4) Only DML

A practical voltage source consists of an ideal voltage source in  (A) Series with internal resistance (B) Parallel with internal resistance (C) Series with impedance (D) Series with capacitance

A three phase 50 Hz line consists of three conductors each of diameter 21 mm, The spacing between the conductors all follows: A - B = 3m, B - C = 5m, C - A = 3.6m If the line operates at 132 k V, the reactive voltampere generatd by the line per km is?

A 100 km transmission line is designed for a nominal voltage of 132 kV and consists of one conductor per phase. The line reactance is 0.726 ohm/km. The static transmission capacity of the line, in MW, would be   (a) 240 (b) 132 (c) 416 (d) 720

Norton's Theorem is a way to reduce a network to  (A) An equivalent circuit composed of a single current source, series resistance, and series load (B) An equivalent circuit composed of a single voltage source, parallel resistance, and parallel load (C) An equivalent circuit composed of a single voltage source, series resistance, and series load (D) An equivalent circuit composed of a single current source, parallel resistance, and parallel load

In the circuit shown below, the current through the inductor is,

An R-L series AC circuit has R = 10 ohm and XL = 10 ohm. It is connected to an AC voltage source, the phase angle between voltage and current is (a) 30° (b) 45° (c) 60° (d) 36.8°

In an RLC series AC circuit, if frequency is below the resonant frequency, then (a) XC = XL (b) XC < XL (c) XC > XL (d) None of these

The time constant for the  given circuit is A) 1/9 S B) 1/4 S C) 4S D) 9S

In an ac series RLC circuit, the voltage across R and L is 20 V; voltage across L and C is 9 V and voltage across RLC is 15 V. What is the voltage across C?

An electrical circuit with 10 branches and 7 junctions will have

The circuit has resistors, capacitors and semi-conductor diodes. The circuit will be known as