7 views
in Electronics communication by
Ionosphere layer of earth is situated at 

(A) upto 18 kms from earth (B) from 18 to 70 km (C) 70 to 500 km (D) above 500 km

1 Answer

0 votes
by

Ionosphere layer of earth is situated at 70 to 500 km

Related questions

1 answer 18 views

A 300 mm long conductor is carrying a current of 10 A and is situated at right angles to a magnetic field having a flux density of 0.8 T ; the force on the conductor will be

asked Mar 29, 2018 in Electrical engineering materials by Shimroz123
1 answer 12 views

Earth coverage dish antenna is used in satellite system. It is characterized by the fact that  (a) It is a narrow beam antenna (b) It is Parabolic antenna (c) it is sharply focused within a small area of the surface of the earth (d) it is a wide angle antenna which covers a large area of the surface of the earth

asked May 15, 2018 in Electronics communication by Shimroz123
1 answer 9 views

A radio receiver is placed at one corner of a table and again placed at some other corner of the same table. Loudspeaker output is changed because  (a) image interference is reduced (b) adjacent channel interference is increased (c) of fading (d) line of sight propagation is not utilized

asked May 15, 2018 in Electronics communication by Shimroz123
1 answer 14 views

A tuned circuit has a Q of 100 at its resonant frequency of 500 kHz. Its bandwidth is _____kHz. (A) 50000 (B) 0.2 (C) 600 (D) 5

asked May 12, 2018 in Electronics communication by Shimroz123
0 answers 15 views

The number of brushes in a 6-pole double-layer lap wound dc machine is (A) 8 (B) 6 (C) 4 (D) 2 

asked Jun 4, 2018 in Electrical Machine by Shimroz123
0 answers 21 views

If diameter of each conductor of a transmission line is ‘d’, then the diameter of n-layer stranded conductor will be (a) (2n – 1) d (b) (2n + 1) d (c) (3n – 1) d (d) (3n + 1) d 

asked May 26, 2018 in Electric Power Transmission by Shimroz123
1 answer 26 views

A 3 layer, total diameter of an ACSR conductor is 5 cm. Find the diameter of each strand?

asked May 8, 2018 in Electric Power Transmission by Shimroz123
1 answer 65 views

Number of commutator bars for a 4-pole, 2-layer, DC lap winding with 24 slots and one conductor per layer is (A) 48 (B) 24 (C) 192 (D) 96

asked Apr 28, 2018 in Electrical Engineering by Shimroz123
1 answer 29 views

For integrated circuits photolithography is used to remove areas of a protective layer so that (a) Chemical reactions can take place in exposed areas. (b) Chemical reactions can take place in unexposed areas. (c) Chemical reactions can take place in transparent areas. (d) Chemical reactions can take place in translucent areas.

asked Apr 14, 2018 in Electrical Engineering by Shimroz123
0 answers 10 views

Storage capacity of a single layer DVD is  A) 4.7GB B) 700MB C) 47GB D) 470MB

asked Apr 9, 2018 in Computer Engineering by Shimroz123
0 answers 20 views

Go-stationary satellites are placed in equatorial orbits at the height approximately  a. 1000 km b. 15000 km 0. 25000 km d. 36000 km

asked Apr 9, 2018 in Electronics communication by Shimroz123
1 answer 12 views

What is the diameter of the GI pipe through which the earth wire needs to be taken out?

asked May 29, 2018 in Electrical Engineering by Shimroz123
1 answer 12 views

The color of wire recommended for earth connection as per BIS code is

asked May 14, 2018 in Electrical Engineering by Shimroz123
1 answer 14 views

In practice, Earth is chosen as a place of zero electric potential because it 

asked Apr 23, 2018 in Electrical Engineering by Shimroz123
1 answer 29 views

Reason for the larger size of the earth terminal of a normal house hold plug is:  A) To make first contact during plugging in B) To maintain contact up to the last point during the removal of plug C) To carry larger current incase of a fault D) All of the above

asked Apr 9, 2018 in Electrical Engineering by Shimroz123
1 answer 19 views

The function of the earth wire in an extra high voltage line is to?

asked Mar 27, 2018 in Power system by Shimroz123
1 answer 5 views

Define i)P-N junction diode ii) Depletion layer iii)Forward bias iv)Reverse bias of P-N junction diode

asked Sep 4, 2018 by Shimroz123
0 answers 7 views

Which of the following are available in the depletion layer of a P -N junction diode ? (A) Free mobile electrons only (B) Free mobile holes only (C) Both free mobile electrons and holes (D) Neither free mobile electrons nor holes

asked Apr 14, 2018 in Electrical Engineering by Shimroz123
0 answers 6 views

Data-link layer of the OSI model specifies  (a) data link procedures that provide for the exchange of data via frames that can be sent and received (b) the interface between the X.25 network and packet mode device (c) the virtual circuit interface to packet-switched service (d) all of the above 

asked Apr 9, 2018 in Electrical Engineering by Shimroz123
1 answer 31 views

A 4-pole, 3-phase, double-layer winding is housed in a 36-slot stator for an ac machine with 60o phase spread. Coil span is 7 short pitches. Number of slots in which top and bottom layers belong to different phases is  (A) 24 (B) 18 (C) 12 (D) 0

asked May 18, 2018 in Electrical Machine by Shimroz123
1 answer 14 views

In a n-channel MOSFET, an inversion layer is  (A) accumulation of electrons near the surface of the substrate under the gate  (B) accumulation of electrons near the drain  (C) accumulation of electrons near the surface  (D) accumulation of hole in the substrate

asked May 12, 2018 in MOSFET by Shimroz123
1 answer 86 views

State function of starter and ELCB. (Earth Leakage Circuit Breaker)

asked Sep 18, 2018 in Industry Electrical Systems-I by Shimroz123
1 answer 38 views

Explain with necessary diagram the earth fault protection of power and auxiliary circuit.

asked Sep 12, 2018 by Shimroz123
2 answers 3 views

State working principle of earth tester.

asked Sep 6, 2018 by Shimroz123
1 answer 11 views

Draw a neat sketch of earth fault protection of auxiliary circuit of electric loco. State the function of relay and isolating resistance.

asked Sep 2, 2018 by Shimroz123
1 answer 10 views

For an earth station transmitter, with an antenna output power of 40dBW 10,000W, a back-off loss of 3dB, a total branching and feeder loss of 3dB, a total branching and feeder loss of 3dB and transmit antenna gain of 4dB, the effective isotropic radiated power (EIRP will be  a) 38dBW b) 40 dBW c 36 dBW d) 47 dBW

asked Jun 15, 2018 in Electronics Engineering by Shimroz123
0 answers 91 views

The presence of earth in case of overhead transmission line (a) increases capacitance (b) increases inductance (c) decreases capacitance (d) decreases inductance

asked May 26, 2018 in Electric Power Transmission by Shimroz123
1 answer 24 views

Earth Leakage circuit breaker (ELCB) works on the basis of

asked May 15, 2018 in Switchgear And Protection by Shimroz123
1 answer 20 views

In a 3-insulator string voltage distribution system the ratio of capacitance between pin and earth to the self capacitance of each unit is 1/4. If the potential across the top unit is 8 kV, then the string voltage is (A) 22.5 kV (B) 24 kV (C) 26 kV (D) 32.5 kV

asked Apr 25, 2018 in Electrical Engineering by Shimroz123
1 answer 33 views

 The insulation resistance of earth of an installation should be nearly: -  a) 0.1 M ohm b) 0.2 M ohm c) 0.5 M ohm d) 1 M ohm.

asked Apr 11, 2018 in Electrical Engineering by Shimroz123
0 answers 12 views

Earth resistance comprises of   A. Resistance of soil away from electrode.   B. Contact resistance between electrode and soil.   C. Resistance of metal electrode   (a) A only  (b) A and B only   (c) A and C only  (d) A, B and C together 

asked Apr 10, 2018 in Electrical Engineering by Shimroz123
0 answers 17 views

For proper earthing, what should be the maximum value of earth resistance while carrying out the testing of earth continuity path ?   (a) 1 Ω (b) 2 Ω (c) 5 Ω (d) 10 Ω 

asked Apr 10, 2018 in Electrical Engineering by Shimroz123
1 answer 25 views

Earth wire on EHV overhead transmission line is provided to protect the line against:

asked May 22, 2018 in Electric Power Transmission by Shimroz123
0 answers 21 views

Attitude control in satellites is necessary for pointing to the desired regions on earth (a) the power supplies (b) the amplifiers (c) the directional antennas aboard (d) the motors

asked Apr 14, 2018 in Electrical Engineering by Shimroz123
1 answer 8 views

Which electrode is not used as earth electrode? A. Nickel Electrode B. Plate Electrode C. Rod and pipe electrode D. All of these 

asked Apr 12, 2018 in Electrical Engineering by Shimroz123
1 answer 13 views
1 answer 12 views

Which of the following statement is false? Modulation is used to: (1) Reduce the bandwidth used (2) Separate differing transmissions (3) Ensure that intelligence may be transmitted over long distances (4) Allow the use of practicable antennas

asked May 29, 2018 in Electronics communication by Shimroz123
1 answer 17 views

Indicate which one of the following is NOT an advantage of FM over AM? (1) Better noise immunity is provided (2) Lower bandwidth is required (3) The transmitted power is more useful (4) Less modulating power is required 

asked May 29, 2018 in Electronics communication by Shimroz123
1 answer 9 views

The disadvantage of CDMA system is: (1) Higher MAI with more user count. (2) That it needs least power consumption. (3) That it needs coherent signal. (4) That it is not suitable with PSK systems 

asked May 29, 2018 in Electronics communication by Shimroz123
1 answer 21 views

Which of the following is an inherent property of an optical signal and cannot be eliminated even in principle? (1) Thermal noise (2) Shot noise (3) Environmental noise (4) Background Noise

asked May 29, 2018 in Electronics communication by Shimroz123

Welcome to electronics2electrical.com here you can ask questions related to electrical, electronics, mechanical, telecommunication, instrumentation, computer, mathematics, physics etc.
Be respectful to all the members. Do not copy and paste the answers from other websites which have copyright content. While asking question give full details about it.

Categories

Most popular tags

power motor dc circuit transformer voltage current used system phase resistance factor synchronous load ac energy induction electric generator series frequency between speed capacitor use electrical meter line difference control type mosfet transmission magnetic plant high single instrument bjt unit source advantages function diode and machine winding field define torque parallel amplifier supply shunt thyristor motors electricity arduino maximum time relay armature problem value on transformers types coil diagram state flow ratio material three formula starting direction theorem method emf operating efficiency digital wave microprocessor test instruments inductance loss measure operation connected signal low applications effect single-phase network temperature working constant losses different law wattmeter measuring compare controlled breaker drive device logic rc full switch flux wire resistivity disadvantages free of materials machines angle force converter conductor transistor gain open protection scr core measurement number bridge principle generators reactance circuits negative the friction iron loop short pole battery conservation steam resistors hysteresis computer using analog lines secondary station gate a rectifier inverter linear induced relays nuclear capacitance basic characteristics design direct work rotor electronics ammeter forces diesel damping rlc connection factors capacitors minimum insulation moving regulation running self systems air fault range main stability quality starter igbt eddy alternator ideal rl average 3-phase plants arc thermal error fuzzy biasing dielectric pressure balanced superposition errors copper rotation feedback impedance measured electronic electrons charge inductive transfer explain start off back curve over solar is three-phase tariff locomotive peak bias zener engineering commutator surge conductors rating universal potentiometer density permanent mechanical transducer capacity memory adc excitation two fuse pure harmonics application semiconductor inductor internal pmmc reaction welding resonance traction permeability breakers rms designed electromagnetic si generation brushes switching capacitive shaded rate 1 distribution resistor methods delta star oscillator reluctance simplification algebra 8085 boolean weston dynamometer insulating strength installation definition fuel heating earth units

8,450 questions

7,047 answers

132 comments

3,085 users

...