Ask a Question
A TRIAC can be switched into on-state by
A TRIAC can be switched into on-state by (A) positive gate current only (B) negative gate current only (C) positive or negative gate current (D) sinusoidal gate current
to add a comment.
← Prev Question
Next Question →
to answer this question.
TRIAC is an ac switch which can be made to conduct on
Turn on time of an SCR can be reduced by using a:
Turn-on time of an SCR in series with RL circuit can be reduced by
A 1 ms pulse can be converted into a 10 ms pulse by using ...
The property of materials by which they can be drawn into wires is known as:
A capacitor-start single phase induction motor is switched on to supply with its capacitor replaced by...
Can we use triac in multiquadrant chopper?
Whether a given point in the S-plane lies on the Root Locus of a system can be determined by
In dc choppers for chopping period T, the output voltage can be controlled by FM by varying
Thyristor can be protected from over voltages by using
The d.c. series motor should never be switched on at no load because?
A Wheatstone bridge cannot be used for precision measurements because errors are introduced into on ...
Draw and explain how one lamp can be controlled by two switch. State application of it.
The steady state stability of the power system can be improved by
The steady state error of the system can be minimized by
The state equations in the phase variable canonical form can be obtained from the transfer function by
The steady state stability of the power system can be increased by?
The high level language can be translated into machine language with the help of
The main advantage of BODE's plot is that multiplication of magnitudes can be converted into : -
With neat sketch explain four modes of operation of a TRIAC?
A triac is a device which acts as a
A cylindrical rotor synchronous motor is switched on to the supply with its field windings shorted on
The inrush current of a transformer at no load is maximum if the supply voltage is switched on
In a lamp load when more than one lamp are switched on the total resistance of the load?
If a transformer is switched on to a voltage more than the rated voltage?
To turn a UJT ON, the forward bias on emitter diode should be:
In the equivalent circuit of a 3-phase induction motor, the mechanical load on the motor can be represented...
A Buchholz relay can be installed on?
The voltage profile of a n-bus power system can be improved by controlling the
A bi-stable multi-vibrator can be built by using
The active power of a synchronous generator can be varied mainly by
The measurement range of an ammeter can be increased by using a:
Measurement of power and power factor of a 3-phase system by two wattmeter method can be
The power delivered to a 3-phase load can be measured by the use of two wattmeters only
Range of a voltmeter can be extended by connecting a
Stability of a transmission line can be increased by
The fall in speed of a dc generator due to increase in load can be corrected by
A 1ms pulse can be stretched to 1 s pulse by using
The resolving power of a spectrometer consisting of collimator, a grating and a telescope can be increased by
The sum of product expression for a Boolean function can be derived from its truth table by
A basic S -R flip-flop can be constructed by cross -coupling which basic logic gates : -
In a household single phase induction type wattmeter, the meter can be reversed by: -
The power delivered to a three-phase load can be measured by the use of 2 wattmeter only when the
A keyword can be used as an identifier by using the
A class can be converted to a thread by implementing the interface ___
ICB0 in a transistor can be reduced by reducing:
By which of the following connections, one-bit binary counter can be obtained from a JK flip-flop?
The range of a dc milliammeter can be extended by utilizing a...
Magnetism of a magnet can be destroyed by
The induction of a high Q inductor can be measured by a