# The effect of negative feedback on distortion and bandwidth is A) Both distortion and bandwidth get

23 views
The effect of negative feedback on distortion and bandwidth is A) Both distortion and bandwidth get decreased B) Both distortion and bandwidth get increased C) Distortion is reduced and bandwidth is increased D) Distortion is increased and bandwidth is decreased

The effect of negative feedback on distortion and bandwidth is Distortion is reduced and bandwidth is increased

## Related questions

An amplifier has a voltage gain of 120. To reduce distortion, 10% negative feedback is employed. The gain of the amplifier with feedback is  (1) 141 (2) 92.3 (3) 9.23 (4) 1.41

How does negative feedback reduces distortion in an amplifier?

A unity negative feedback control system is found to have a gain margin of 20 dB. The Nyquist plot of the system (A) crosses the real axis at +0.1 (B) crosses the real axis at -0.1. (C) crosses the imaginary axis at -0.1 (D) crosses the imaginary axis at +0.1

Negative feedback in a closed-loop control system DOES NOT (A) reduce the overall gain (B) reduce bandwidth (C) improve disturbance rejection (D) reduce sensitivity to parameter variation

Differentiate between positive and negative feedback.

Define negative and positive feedback

Given a unity feedback system with G(s)=k/s (s+4), the value of k for damping ratio of 0.5 is

Define gain and bandwidth of an amplifier.

The unity gain bandwidth of an inverting amplifier is 10 MHz What would be the bandwidth if the gain is increased to 10 V/V? A) 100 MHz B) 1 MHz C) 10 MHz D) 1 kHz

The effect of increasing load on a synchronous motor running with normal excitation is (A) Increase both its Ia and power factor. (B) Decrease Ia, but increase power factor. (C) Increase Ia, but decrease power factor (D) Decrease both Ia and power factor.

The second harmonic distortion is defined as the A) Ratio of amplitude of second harmonic component in the output to that of the fundamental frequency B) Harmonic distortion due to only second harmonic component C) Sum of distortion of first and second harmonic components in the output

Transformer coupling introduces which type of distortion?

What is meant by distortion in amplifiers?

The skin effect in conductors is due to non uniform distribution of current in it and major portion of current is near the _______ of conductor.  (1) Surface (2) Center (3) Complete cross section area (4) Axis

A negative sequence relay is used for protection of  (1) Generator (3) Motor (2) Transformer (4) Long Transmission lines

Which side of a capacitor is negative?

The transducer with negative temperature co-efficient of resistance is (A) Thermistor (B) Resistance Thermometer (C) Strain Gauge (D) Thermocouple

The effect of a finite gain of an operational amplifier used in an integrator is that (A) it would not integrate (B) the slope of the output will vary with time (C) the final value of the output voltage will reduce (D) there will be instability in the circuit

A transformer has negative voltage regulation when its load power factor is   (1) Zero (2) Unity (3) Leading (4) Lagging

Negative voltage regulation is indicative that the load is?

What is meant by feedback in electronics?

Why feedback is required in oscillators?

Skin effect is absent in which of the following transmission systems? A) Extra High Voltage (EHV) AC B) High Voltage Direct Current (HVDC) C) Both A and B D) None of these

Define junction field effect transistor (JFET) and give an example.

Explain hysteresis loss, eddy current loss and skin effect limitations with reference to magnetic material.

Is an anode positive or negative?

What are the applications of Hall effect?

explain skin effect in copper interconnects. what are the various ways of reducing this effect?

With the introduction of negative feedback, the gain—bandwidth product of an amplifier  A) Becomes infinity B) Increases C) Decreases D) Remains constant

Which diode exhibits negative resistance characteristic? (A) LED (B) Zener (C) Tunnel diode (D) PN diode

Why does charge flow from positive to negative?

Skin effect occurs when a conductor carries current at_____ frequencies.

What is piezoelectric effect? Name two piezoelectric material.

Ferranti Effect is more pronounced when ___________ A) the line is longer and the voltage applied is higher B) the line is shorter and the voltage applied is lower C) the line is shorter and the voltage applied is higher D) none of these

What is meant by body effect in MOSFET?

what is skin effect?

what is Ferranti effect?

When does the Body bias effect occur in an n-channel MOSFET?  A) When the Source voltage is less the Bulk voltage B) When the Source voltage is equal to or greater the Bulk voltage C) When the Drain voltage is equal to the Bulk voltage D) When the Gate voltage is equal to the Bulk Voltage

when the skin effect occurs ?

With negative feedback, the system stability and system gain respectively (a) Increases and increases (b) Increases and decreases (c) Decreases and increases (d) Decreases and decreases

Differentiate between positive and negative feedback on the basis of . (i) overall phase shift (ii) voltage gain (iii) stability (iv) applications

Explain magnetic effect employed in measuring instrument.

In order to regulate steady state error to zero, in a negative feedback control system, one employs