# A certain power MOSFET has a maximum junction temperature specification of 1500o C, a junction-to-case

60 views
in MOSFET

A certain power MOSFET has a maximum junction temperature specification of 1500o C, a junction-to-case thermal resistance of 1.00 C/W, and a junction-to ambient thermal resistance of 600 C/W. If the ambient temperature is 300o C, then the maximum allowable power dissipation in the device will be A) 1.52 W B) 1.72 W C) 1.92W D) 2.00 W

A certain power MOSFET has a maximum junction temperature specification of 1500o C, a junction-to-case thermal resistance of 1.00 C/W, and a junction-to ambient thermal resistance of 600 C/W. If the ambient temperature is 300o C, then the maximum allowable power dissipation in the device will be 2.00 W

## Related questions

If a transformer is continuously operated the maximum temperature rise will occur in?

What is the Power Supply specification for 8085AH microprocessor? A) Single +5V supply with 10% voltage margins B) Dual +5V supply with 10% voltage margins C) Single +10V supply with 5% voltage margins D) Dual +5V supply with 5% voltage margins

An independent voltage source in series with an impedance ZS=R+jXS delivers a maximum average power to a load impedance ZL when A) ZL = R B) ZL = jXS C) ZL = R-jXS D) ZL = R+jXS

Justify. Power MOSFET is operated at high enough gate source voltage to minimize the conduction losses.

The maximum reluctance power of a salient-pole synchronous motor having direct-axis reactance, 1.0 pu and quadrature-axis reactance, 0.5 pu, and input voltage, 1.0 pu is (A) 0.25 pu (B) 0.5 pu (C) 1.0 pu (D) 1.5 pu

"Maximum power output is obtained from a network when the load resistance is equal to the output resistance of the network as seen from the terminals of the load". The above statement is associated with?

The maximum load that a power transformer can carry is limited by its?

Explain the formation of parasitic BJT and parasitic diode in Power MOSFET. Can parasitic diode be used in same power electronics applications?

For maximum transfer of power, internal resistance of the source should be?

What is the maximum value of power factor?

A MOSFET has how many terminals?

Maximum Power Transfer Theorem 1

State maximum power transfer theorem for DC circuit.

The synchronous motor will develop maximum power when the load angle is?

List specification of zener diode

What is the transconductance of a MOSFET?

What is the use of a Mosfet?

How can we check a Mosfet?

What is the work of MOSFET?

In MOSFET, the polarity of the inversion layers is the same as that of?

MOSFET uses the electric field of?

Is the input impedance of MOSFET more than BJT and FET?

When does the Body bias effect occur in an n-channel MOSFET?  A) When the Source voltage is less the Bulk voltage B) When the Source voltage is equal to or greater the Bulk voltage C) When the Drain voltage is equal to the Bulk voltage D) When the Gate voltage is equal to the Bulk Voltage

What is meant by pinch off voltage in MOSFET?

What is channel length modulation in MOSFET?

What is meant by body effect in MOSFET?

Why Mosfet is called Mosfet?

Define Depletion region and Barrier voltage of PN junction.

The leakage current of PN junction is caused by?

Which of the following has nearly zero temperature coefficient? A) Constantan B) Manganin C) Both A and B D) None of these

A _________ is used to measure the stator % winding temperature of the generator.  (A) Thermocouple (B) Pyrometer (C) Resistance thermometer (D) Thermometer

Define junction field effect transistor (JFET) and give an example.

The maximum torque of d.c. motors is limited by?

Operating frequency of power MOSFET is higher than that of power BJT. Justify the statement.