# State the material used for moving coil and former for PMMC instruments.

17 views
State the material used for moving coil and former for PMMC instruments.

Material Used for Moving Coil and Former for PMMC Instruments:

Material used for moving coil: Copper

Material used for Former: Aluminium

## Related questions

Name the material used for :- (i) Moving coil (ii) Permanent magnet in PMMC instrument.

Permanent magnet moving coil instruments are used for

When the voltage across a battery is measured using a D.C potentiometer, the reading shows 1.08 V. But when the same voltage is measured using a Permanent Magnet Moving Coil (PMMC) voltmeter, the voltmeter reading shows 0.99 V. If the resistance of the voltmeter is 1100 Ohm , the internal resistance of the battery, in Ohm , is (A) 150 (B) 100 (C) 50 (D) 200

A PMMC instrument has FSD of 100 μA and a coil resistance of 1 kΩ. To convert the instrument into an ammeter with full scale deflection of 100 mA, the required shunt resistance is (A) 1 Ω (B) 1.001 Ω (C) 0.5 Ω (D) 10 Ω

A moving coil of meter has 100 turns, and a length and depth of 10mm and 20mm respectively. It is positioned in a uniform radial flux density of 200 mT. The coil carrier current capacity is 50 mA. The torque on the coil is

A moving coil meter has a resistance of 3 Ω and gives full scale deflection with 30 mA. To measure voltage up to 300 V, the external resistance to be connected in series with the instrument is (A) 9997 Ω (B) 10000 Ω (C) 997 Ω (D) 10003 Ω

State the function of former and control spring in PMMC instrument.

Eddy current damping cannot be used for moving iron instrument because

An unshielded moving iron voltmeter is used to measure the voltage in an AC circuit. The stray DC magnetic field having a component along the axis will be  (1) unaffected (2) decreased (3) increased (4) either decreased or increased depending on the direction of the DC field

Peterson coil is used for :  (A) shunt compensation of lines (B) grounding of system neutral (B) reduce fault currents (D) connecting interconnected systems

The material used in liquid fuses is  (1) SF6 (3) carbon tetra chloride (2) distilled water (4) transformer oil

State the four major parts of Transformer and material used for their construction.

State function of Busbar and which material is used for busbar?

‘PMMC instrument is not suitable to measure AC quantity’. State the reason.

State working principle of PMMC instrument.

State the meaning of secondary instrument. Classify secondary instruments.

In a PMMC instrument, the damping provided is :  (A) air damping (C) eddy current damping (B) fluid damping (D) magnetic damping using a magnet

State two purposes of calibration of measuring instruments.

Compare PMMC & MI instrument.

List out any four effects of electric current used in measuring instruments & write name of meter working on it.

List three types of errors in measuring instruments. Give reasons of occurring for any one of them.

Standard Commands for Programmable Instruments (SCPI)

lt the length, number of turns and area of a coil are  doubled, the inductance of the coil

What is the difference between a coil and an inductor?

Compare primary and secondary instruments.

A material for good magnetic memory should have?

List four examples of insulating material and explain any two.

Explain hysteresis loss, eddy current loss and skin effect limitations with reference to magnetic material.

Give the classification of the errors used in measuring instrument & state the reason for their occurrence.

Explain the essential toques in analog type measuring instruments.

State the use of shunt and series resistance used in extension of meter.

State starters used for i) 3-Ph squirrel cage induction motor (3HP) ii) D.C. motor

The magnetic susceptibility of paramagnetic material is: A) Less than zero B) Less than one but positive C) Greater than one D) Equal to zero