# Draw and describe working of electronic energy meter.

10 views
Draw and describe working of electronic energy meter.

working of electronic energy meter:- 1. CT reduces current to reasonable value for current scaling network. 2. Voltage & current scaling networks reduce proportionally the voltage & current to values suitable for the analog multiplier. 3. Analog multiplier gives a dc voltage proportional to the product of the voltage and current drawn from supply that is the power drawn. 4. The voltage controlled oscillator gives a frequency proportional to its input (which is proportional to the power). 5. The ADC converts the square wave frequency analog output to display the energy in watthour.

## Related questions

Draw a block diagram of electronic energy meter. Write function of each block.

Describe with working of LCR meter for measurement of inductance.

Draw a neat sketch of 1-ph induction type energy meter and write operating principle of it.

Explain working of Weston type frequency meter.

Explain the “mitigation of power theft” and “faulty meter replacement” for energy conservation techniques to reduce commercial losses.

State the function and shape of following parts used in induction type energy meter: i) Series magnet ii) Shunt magnet iii) Al disc iv) Brake magnet

State the meaning of creeping error in 1 phase energy meter.

With neat diagram explain calibration of energy meter by direct loading method.

Write any two advantages of digital energy meter.

List any four errors in induction type energy meter. Give method of compensation for each.

A 200 V, 5 A d.c. energy meter is tested at its marked ratings. The resistance of the pressure circuit is 8000 Ω and that of current coil is 0.1 Ω. The power consumed when testing the meter with phantom loading with current circuit excited by a 6 V battery is (A) 2.5 W (B) 5 W (C) 32.5 W (D) 35 W

Phantom loading for testing of energy meter is used (A) to isolate the current and potential circuits (B) to increase power loss during testing (C) for meters having low current ratings (D) to test meters having a large current rating for which loads may not be available

The disc of a single phase Induction-type energy meter makes 60 revolutions in 6 minutes. Meter Constant is 1200 rev/kWh. Power consumption in the load is (A) 1.2 kW (B) 1 kW (C) 600 W (D) 500 W

What is meant by energy meter constant?

Why energy meter is integrating type measuring instrument?

An induction type energy meter is found to run fast. Correction for this error can be made by  (A) Over-load compensation. (B) Voltage compensation. (C) Moving the brake magnet away from the centre of the disc. (D) Moving the brake magnet towards the centre of the disc.

Draw the diagram and explain the working of ferrodynamic type frequency meter.

Draw symbol of LED and explain it’s working principle.

Enlist the different modes of operation of electronic counters and explain any two modes in details.

Describe the difference between direct and alternating current.

Describe the difference between an open circuit and a short circuit.

Describe the various blocks and their functions in pipelined ADC architecture.

Draw the block diagram of basic wind energy conversion system and write function of each block.

Describe principle of operation of Doppler type ultrasonic flow meter with diagram.

With a neat sketch explain working of 1 phase dynamometer type power factor meter.

Write the working of L-C-R meter with suitable sketch.

What are the types of electronic communication?

What is the definition of electronic communication?

Briefly describe the electric field of a static charge.

Describe operation of N-channel JFET

Describe the basic SHA operation with the help of its four mode specifications.

Explain working of superheater and condenser.

Describe the following energy conservation methods of lighting system. i) By replacing lamp sources ii) Using light control gears.

Describe the following energy conservation methods of electrical motor. i) By motor survey ii) By matching loads with motor rating

The first digital electronic computer was built in the year________  A. 1950 B. 1960 C. 1940 D. 1930

What is Electronic Systems Engineering?

What is electronic circuit design?

What is an electronic controller?

What is an electronic design?

Electronic Counter

Describe triggering circuit for TRIAC using DIAC.

State the use of shunt and series resistance used in extension of meter.