# State any four errors that occur in dynamometer type wattmeter

6 views
State any four errors that occur in dynamometer type wattmeter

Errors that occur in dynamometer type wattmeter: 1. Errors due to method of connection. 2. Error due to pressure coil inductance. 3. Error due to pressure coil Capacitance. 4. Error due to mutual inductance effect. 5. Error due to stray magnetic fields. 6. Error due to eddy currents. 7. Temperature error. 8. Error due to vibration of moving system

## Related questions

State the effects of errors in dynamometer type wattmeter due to i) pc- inductance ii) pc- capacitance iii) mutual inductance iv) Connection.

With neat diagram explain constructional details of dynamometer type wattmeter.

State various types of errors in wattmeter.

List the different errors in wattmeter & explain compensation for it.

The potential coil of a single phase dynamometer wattmeter has 4840 Ohm resistance. Voltage across the load is 220 V. With the potential coil connected on the load side, the meter indicates 100 W. Approximate percentage error due to wattmeter connection is (A) 11% (B) 9% (C) 1.1% (D) 3%

List any four errors in induction type energy meter. Give method of compensation for each.

Gross errors occur in measurements because of (A) disturbances about which we are unaware. (B) human mistakes. (C) inherent shortcomings in the instrument. (D) loading effects on the meters.

List three types of errors in measuring instruments. Give reasons of occurring for any one of them.

State any two disadvantages of one wattmeter method of measurement of 3 phase power.

With a neat sketch explain working of 1 phase dynamometer type power factor meter.

Give the classification of the errors used in measuring instrument & state the reason for their occurrence.

Explain construction & working of electrodynamometer type wattmeter.

What arc the errors occurring in measuring devices due to stray magnetic field and temp '? Explain how to compensate them.

Describe systematic errors in measuring instruments.

What are the factors influencing measurement errors?

The torque produced in wattmeter is proportional to

In a 3-phase power measurement by two wattmeter method the reading of one of the wattmeter was zero. The power factor of the load must be?

In a 3-phase power measurement by two wattmeter method, both the watt meters had identical readings. The power factor of the load was?

List any four types of electrical faults that may occur on electric locomotive with their causes.

Merits of two wattmeter method

Compare CC and PC of wattmeter on the basis of:- (i) Connection (ii) Status (iii) Number of turns (iv) Gauge of wire.

In dynamometer type of wattmeter, which of the coil is split up into two parts?

Write any four points that state how a traction transformer is different from ordinary transformer.

The pressure coil of a dynamometer type wattmeter is  A) Highly inductive B) Highly resistive C) Purely resistive D) Purely inductive

A dynamometer type wattmeter with its voltage coil connected across the load side of instrument reads 250 W. If the load voltage be 200 V, what power is being taken by load? The voltage coil has resistance of 2000 Ω. (1) 200 W (2) 215W (3) 230 W /(4) 245 W

State working principle of column type load cell and state its any four applications.

If a dynamometer wattmeter is connected in an ac circuit, the power indicated by the wattmeter will be (a) volt-ampere product (b) average power (c) peak power (d) instantaneous power

Moving coil in dynamometer wattmeter connected : - a) in series with fixed coil b) across supply c) in series with load d) across load

State and explain any four commercial losses in transmission and distribution system.

State any four periodical maintenance which is necessary in transformer to achieve energy conservation.

State any four applications of nanomaterial in engineering field.

Compare core type and shell type transformer on any four parameters.

The magnitude of various voltage drops that occur in an alternator depends on?

State any four applications of micrometers.

State any four desirable characteristics of ideal traction motor. State the names of different traction motor used.

State any four advantages of soft starter.