# Superposition theorem in electrostatics

55 views

## Related questions

In application of superposition theorem, one is required to solve as many circuits as there are  1. Nodes 2. Branches 3. Meshes 4. Sources

In applying superposition theorem, to determine branch currents and voltages   (a) all current and voltage sources are shorted. (b) only current sources are open circuited. (c) only voltage sources are shorted. (d) voltage sources are shorted and current sources are open circuited.

State Superposition Theorem.

State superposition theorem applied to D.C. circuits.

Superposition theorem is not applicable to network containing: (1) Non linear element (2) Dependent voltage source (3) Dependent current source (4) Transformer.

Which of the following statements is incorrect ? (A) Superposition theorem is useful for Linear and Non-linear circuit analysis when several sources are present in the circuit. (B) Thevenin's equivalent network consists of one voltage source in series with an impedance. (C) Norton's equivalent network consists of ... . (D) When both the load and source impedances are purely resistive, maximum power transfer is achieved under the condition : Load Resistance = Source Resistance

Superposition theorem stays valid for a : -  a) LTI system b) Discrete system c) LT systems d) None of these

The superposition theorem requires as many circuits to be solved as there are?

The superposition theorem is applicable to?

The concept on which Superposition theorem is based is?

Superposition theorem can be applied only to circuits having?

The superposition theorem is based on the concept of ?

Why superposition theorem is not valid for power?

Can we apply the superposition theorem to AC circuit?

Electrostatics : Electric Field & Potential

As per Shannon’s channel capacity theorem, if samples are transmitted in ‘T’ seconds over a noisy channel which is bandlimited to ‘B’ Hz. The number of samples ‘n’ is given by (symbols/notations carry their usual meaning) A) B/T B) T/B C) 2BT D) BT/2

To find current in a resistance connected in a network, Thevenin's theorem is used VTH = 20 V and RTH = 5 Ω. The current through the resistance: (1) is 4 A (2) is 4 A or less (3) is less than 4 A (4) May be 4 A or less or more than 4 A

While calculating Rth in Thevenin's theorem and Norton equivalent?

In Thevenin's theorem, to find Z?

Can you apply Thevenin's theorem in an AC circuit?

Can we apply Norton's theorem in an AC circuit?

Superposition

Maximum Power Transfer Theorem 1

Write the steps for finding the current through an element by Thevenin’s theorem.

State Thevenin’s Theorem.

State maximum power transfer theorem for DC circuit.

For AC networks, as per maximum power transfer theorem, for maximum power transfer, the source impedance should be equal to: A) twice the load impedance B) complex conjugate of load impedance C) twice the complex conjugate of load impedance D) none of these

Millman's theorem yields equivalent  (1) Impedance or Resistance (3) Voltage source (2) Current source (4) Voltage or Current source

Norton’s theorem states that a complex network connected to a load can be replaced with an equivalent impedance (A) in series with a current source (B) in parallel with a voltage source (C) in series with a voltage source (D) in parallel with a current source

Gauss's theorem states that total electric flux Φ emanating from a closed surface is equal to (a) Total current density on the surface (b) Total charge enclosed by that surface (c) Total current on the surface (d) Total charge density within the surface

Application of Norton's theorem to a circuit yields : (A) Equivalent current source only (B) Equivalent voltage source only (C) Equivalent voltage source and impedance in series (D) Equivalent current source and impedance in parallel

Which ofthe following theorem is applicable for both linear and non-linear circuits?   A) Superposition theorem B) Thevenin’s theorem C) Norton’s theorem D) None of these

Norton's Theorem is a way to reduce a network to  (A) An equivalent circuit composed of a single current source, series resistance, and series load (B) An equivalent circuit composed of a single voltage source, parallel resistance, and parallel load (C) An equivalent circuit composed of a single voltage source, series resistance, and series load (D) An equivalent circuit composed of a single current source, parallel resistance, and parallel load