how to calculate apparent power

105 views

S=p/cosα

Where α is the powerfactor

Related questions

How do you calculate power loss?

The ratio of active power to apparent power is known as____ factor.

The product of apparent power and cosine of the phase angle between circuit voltage and current is?

The apparent power drawn by an A.C. circuit is 10 kVA and active power is 8 kW. The reactive power in the circuit is?

Active power and apparent power are represented by?

For a balanced three phase star connected load for which line voltage is 230V and per phase resistance and reactance is 6 Ohm and 8 Ohm respectively. Calculate: 1) phase voltage 2) line current 3) power factor 4) total power absorbed

A balanced Delta connected load supplied with 440 V 50 Hz three phase AC supply has R=10 Ohm and L=0.6 mH in is each arm. Calculate line and phase current, active power.

AM transmitter has a carrier power of 30 W. The percentage of modulation is 85%. Calculate the total power : (A) 5.4 W (B) 40.8 W (C) 10.8 W (D) 20.4 W

Calculate the power loss, if power generated by two plants are P1=50 MW and P2 =40 MW and the loss coefficients are B11=0.001, B22=0.0025 and B12=-0.0005.  (A) 4.5 MW (B) 5.5 MW (C) 6.5 MW (D) 8.5 MW

How many volts does it take to power an Arduino?

How does electricity get from the power plant to your home?

How to make power bank from laptop battery cells?

Transfer function of a system is used to calculate  (a) the steady state gain (b) the time constant (c) the order of the system (d) the output for a given input

Discuss how power factor tariff results into energy conservation.

how can I make  a dc variable power supply

How is Power electronics distinct from linear electronics?

A heater takes 4 Amp at 250 volts. How much power does it consume? A. 1 KWatt B. 2 KWatt C. 3 KWatt D. 4 KWatt

How can we improve power factor using synchronous motor?

How many watts does a power plant produce?

How much electricity is produced by a power plant?

How can power loss be reduced?

How much power does an Arduino use?

How do you power an Arduino?

How do you measure power factor?

How often do power surges occur?

How many volts are in the power lines?

How do you find power in a circuit?

How does a capacitor improve power factor?

Calculate the resistance value in ohms for the following conductance values: (a) 0.002 S (b) 0.004 S (c) 0.00833 S (d) 0.25 S.

Calculate the resistance value in ohms for the following conductance values: (a) 0.001 S (b) 0.01 S (c) 0.1 S (d) 1 S.

A current of 4 amperes flowing for 45 minutes deposits 1.062 gm of metal at cathode. Calculate the equivalent weight of the metal. (Given 1 Faraday = 96500 C)

A coil of 500 turns is linked with a flux of 25 mwb, when carries a current of 12.5A. Calculate the value of self-inductance.

Calculate the size of memory address space for a 16 bit data and 20 bit address bus. A) 1 MB B) 2 MB C) 3 MB D) 4 MB

A meter whose constant is 600 revolutions/kWh makes 5 revolutions in 20 seconds. Calculate the load in kW. (1) 0.5 kW (2) 1 kW (3) 1.5 kW (4) 2 kW

The stator of a 3 phase, 10 pole induction motor possesses 120 slots. If a lap winding is used, calculate the coil pitch, if the coil width extends from slot 1 to slot 11.  (A) 72.12% (B) 83.30% (C) 12% (D) 42%

A Transformer rated 250 kVA, 4160 V / 480 V, 60 Hz has an impedance of 5.1%. Calculate the total impedance of the transformer referred to the primary side.  (A) 69 ohm (B) 0.92 ohm (C) 3.52 ohm (D) 0.51 ohm

Calculate the approximate locked rotor current of a 3 phase induction motor having a rating of 500 Hp, 2300 V.  (A) 130 A (B) 39 A (C) 390 A (D) 780 A

A 0.5 Hp, 6 pole wound rotor induction motor is excited by a 3 phase 60 Hz source. Calculate the frequency of the rotor current at standstill.  (A) 50 Hz (B) 30 Hz (C) 60 Hz (D) 120 Hz

A 150 kW electric motor has an efficiency of 92 %, when it operates at full load. Calculate the losses in the machine.  (A) 92 kW (B) 150 kW (C) 163 kW (D) 13 kW

How much is the potential difference between two points if 0.5 J of energy is required to move 0.4 C of charge between the two points?