EEPROM VS FLASH MEMORY

328 views
EEPROM VS FLASH MEMORY

by

EEPROM VS FLASH MEMORY

Related questions

What is meant by flash over voltage?

Calculate the size of memory address space for a 16 bit data and 20 bit address bus. A) 1 MB B) 2 MB C) 3 MB D) 4 MB

The average time required to reach a storage location in the memory to read or retrieve the contents of memory is called as A) Turnaround time B) Latency time C) Access time D) Response time

What is the size of memory which can be accessed by direct accessing in 8085 microprocessor? A) 64 kB B) 4 kB C) 128 kB D) 128 MB

Explain the advantages and disadvantages of using memory I/O and standard I/O.

Explain memory hierarchy.

A material for good magnetic memory should have?

Explain memory write ability and storage permanence with suitable diagram.

Synchronous vs asynchronous logic

When The dc converter in figure shown has a resistance load of R = 10 Ω and the input voltage is Vs 220 V the converter switch remains on, its voltage drop is Vo -2 V. The chopping frequency is fI K sW Vs If the duty cycle is 50%, determine: (a) the average output voltage V (b) the RMS output voltage Vo (c) the converter efficiency (d) the effective input resistance of the converter

While comparing doped semiconductor vs. un-doped semiconductor, which of the following statements is NOT true ? (A) Doped semiconductor has smaller band-gap compared to un-doped semiconductor (B) Doped semiconductor has more carriers as compared to un-doped semiconductor (C) Doped semiconductor has less resistance as compared to un-doped semiconductor (D) Doped as well as un-doped semiconductor have equal bandwidth

Number of comparators required for an 8 bit flash ADC is: (1) 8 (2) 16 (3) 255 (4) 256

What is the name of programming/scripting language of Flash  (1) Action Script (2) Animation script (3) Java script (4) None of these

A flash type ADC uses  A) Counter B) Op—amps C) An integrator D) Flip flop

The microprocessor can read/write 16 bit data from or to ________ A. memory B. I /O device C. processor D. register

Explain the function of ROM & RAM memory of PLC.

The 8O85 assembly language instruction that stores the contents of H and L registers into the memory locations 2050H and 2051H, respectively, is: A) SPHL 2050H B) SPHL 2051H C) SHLD 2050H D) STAX 2050H

Which computer memory is volatile?  (a) RAM (b) ROM (c) EPROM (d) PROM

To read or write a complete word from / to the memory in 8086 microprocessor and if it is located at an even address, the number of Read or Write cycles required is

In a microprocessor the service routine for a certain interrupt starts from a fixed location of memory which cannot be externally set but the interrupt can be delayed or rejected. Such an interrupt is

Memory that temporarily stores data and that can be erased or changed is known as  a) Cache Memory b) Read Only Memory c) Flash Memory d) Random Access Memory

The following ____ is termed as permanent memory.  a) Random Access Memory b) Read Only Memory c) Flash Memory d) Cache Memory

The 8086 fetches instruction one after another from _____ of memory.   (a) Code segment (b) IP (c) ES (d) SS

memory call bell circuit diagram

How many bits are needed to address 64 K memory: - a) 3 b) 10 c) 16 d) 32

The register in the 8085A that is used to keep track of the memory address of the next op -code to be run in the program is the : a. stack pointer b. program counter c. accumulator d. None of above

Memory unit is one part of __________. A. Input device B. CPU C. Control device D. Output Device

Computer keyboard can be classified as ________device. A. Memory B. Input C. Output D. Storage

Which of the following is a Read Only Memory storage device? A. Floppy Disc B. Hard Disc C. CD ROM D. None of these

Which of the following can be used as a primary memory? A) Magnetic Tape B) RAM C) Optical Disk D) Hard Disk

As compared to the primary memory, the cache memory of the computer is  (1) Large (2) Cheap (3) Fast (4) slow

A 20-bit address bus allows access to a memory of capacity  (1) 1 Mb (2) 2 Mb (3) 32 Mb (4) 64 Mb

The mechanism that bring a page into memory only when it is needed is called _____________  (1) Segmentation (2) Fragmentation (3) Demand Paging (4) Page Replacement

Virtual memory is __________.  (1) An extremely large main memory (2) An extremely large secondary memory (3) An illusion of extremely large main memory (4) A type of memory used in super computers.

What is the memory from 1K - 640K called ?  (1) Extended Memory (2) Normal Memory (3) Low Memory (4) Conventional Memory

An array of size 100 is given and the memory addressing is byte by byte. If The base address of the array is 1000 and every record consists of 40 bytes then address of array[10] will be  (1) 1040 (2) 1400 (3) 1440 (4) 1080

106 bytes of memory is called  (1) 1 KB (2) 1 MB (3) 1 GB (4) 1 TB

230 bytes of memory is called  (1) 1 KB (2) 1 MB (3) 1 GB (4) 1 TB

The two kinds of main memory are:  (1) ROM and RAM (2) Primary and secondary (3) Floppy disk and hard disk (4) None of these

The idea of cache memory is based on  (1) The property of locality of reference (2) The heuristic 90-10 rule (3) The fact that only a small portion of a program is referenced relatively frequently (4) All of these

A static memory stores its data in: (1) Flip Flops (2) inductors (3) Capacitors (4) Resistors.

In 8085 microprocessor with memory mapped I/O which of the following is true?  (1) I/O devices have 16 bit addresses (2) I/O devices are accessed during IN and OUT instructions (3) There can be a maximum of 256 input and 256 output devices (4) Logic operations can not be performed