# What are the losses in a transmission line?

14 views
What are the losses in a transmission line?

## Related questions

A 50Ω transmission line is terminated in an impedance of 20-j50. What will be the reflection coefficient? A) 0.69 B) 1.69 C) 6.9 D) 16.9

In a transmission line if booster transformers are to be used, preferred location will be  (A) At the receiving end (B) At the sending end (C) At the intermediate point (D) Anywhere in the line

Explain following techniques related to energy conservation in transmission and distribution system. (i) By balancing phase currents (ii) Variable technical losses (I2R losses).

The sending end and receiving end voltages of a three-phase transmission line are 10 kV/ph and 9.5 kV/ph, respectively. If the resistance drop is 150 V/ph and receiving end power factor is 0.8, the sending end power factor is (A) 0.745 lagging (B) 0.775 lagging (C) 0.8 lagging (D) 0.85 lagging

what is mean by medium transmission line ?

what is mean by short transmission line ?

what is mean by long transmission line ?

The sag of a transmission line is least affected by (A) Self weight of the conductor. (B) Temperature of the surrounding air. (C) Current through the conductor. (D) Ice deposited on the conductor.

For a short transmission line with r/x ratio of is 1.0, the regulation will be zero when the load power factor is

A transmission line of 200 km has a certain A, B, C and D parameters. If the length is reduced to 60 km

Transmission efficiency of a transmission line increases with the

Series capacitive compensation in EHV transmission line is used to

Stability of a transmission line can be increased by

A transmission line has 1 P.0 impedance on a base of 11 KV, 100 MVA. On a base of 55 KV. it will have a P.0 impedance of

What are the advantages of high voltage transmission?

What are the types of power losses in inductor?

What is the difference between a line voltage and low voltage control system?

What is the difference between line and phase current?

What is the difference between line and phase voltage?

In a given transformer for a given applied voltage, losses which remain constant irrespective of load changes are?

In voltage source converter based HVDC transmission system the active power is controlled by changing (A) phase angle of the converter ac input voltage (B) supply frequency of the converter ac input voltage (C) magnitude of the converter ac input voltage (D) DC voltage at the inverter terminals

The friction losses in Real Transformers are :  (A) 0% (B) 5% (C) 25% (D) 50%

What is the percentage of stray losses in DC machine?

Why high voltage is used in power transmission?

In DC motor iron losses are occurred in?

Reduction in core losses and increase in permeability are obtained with transformer employing?

Losses which occur in rotating electric machines and do not occur in transformers are?

What is the job of a servo in a transmission?

In a synchronous motor which losses varies with load?

In synchronous motor, does the winding losses vary with load?

Explain the on state losses in power BJT.

What is the voltage in 3 phase line?

How many insulator disc used for 33 kV transmission voltage line?

If a 5-bus test system contains 6 transmission lines and one transformer, how many non-zero elements are there in the system Y-bus ? (A) 25 (B) 12 (C) 11 (D) 19

Explain the “mitigation of power theft” and “faulty meter replacement” for energy conservation techniques to reduce commercial losses.

Which of the following can reduce the Eddy current losses? A) By making the core of a stack of plates electrically insulated from each other B) By making the core of solid block C) By increasing the applied voltage  D) None of these