# Explain power in single phase AC circuit.

25 views
Explain power in single phase AC circuit.

## Related questions

Explain power relations in three phase circuit.

Describe the gate circuit for a single phase full converter.

What is the power factor when a single phase watt meter operating on 200 V and 5 A for 5 hours makes 2016 revolutions and the meter constant in revolution is 420? A) 0.04 B) 1.04 C) 0.96 D) None of these

List any two methods of reactive power measurement in 3 phase circuit.

Explain the principle of ON-OFF control and phase control of AC voltage controller with suitable circuit and waveforms.

In an A.C. circuit power is dissipated in?

The apparent power drawn by an A.C. circuit is 10 kVA and active power is 8 kW. The reactive power in the circuit is?

explain the working of single phase induction motor.

The input of an A.C. circuit having power factor of 0.8 lagging is 40 kVA The power drawn by the circuit is?

Pure inductive circuit takes power from the A.C. line when?

Draw the single stage RC coupled amplifier circuit and explain its’s operation.

The disc of a single phase Induction-type energy meter makes 60 revolutions in 6 minutes. Meter Constant is 1200 rev/kWh. Power consumption in the load is (A) 1.2 kW (B) 1 kW (C) 600 W (D) 500 W

What are the five types of single phase motors used in the industry?

State any four advantages of three phase over single phase.

A single phase transformer has resistance and reactance of 0.2 pu and 0.6 pu respectively. Its pu voltage regulation at 0.8 pf lagging would he

What is the slip (as a percentage) when a 6 pole single phase induction motor operating on 220 V and 60 Hz is rotating at speed of 1140 rpm? A) 60% B) 5% C) 10% D) None of these

A single core cable is designed to work for a single phase system with a peak voltage of 220 kV. The maximum permissible stress in the dielectric is not to exceed 20 kV/mm. For economical size, the overall core diameter of the cable is (A) 28.2 mm (B) 26.4 mm (C) 24.4 mm (D) 22.0 mm

The potential coil of a single phase dynamometer wattmeter has 4840 Ohm resistance. Voltage across the load is 220 V. With the potential coil connected on the load side, the meter indicates 100 W. Approximate percentage error due to wattmeter connection is (A) 11% (B) 9% (C) 1.1% (D) 3%

A capacitor-start single phase induction motor is switched on to supply with its capacitor replaced by an inductor of equivalent reactance value. It will?

The running winding of a single phase motor on testing with meggar is found to be ground. Most probable location of the ground will be?

An unexcited single phase synchronous motor is ?

How does a single phase induction motor work?

write short notes on single phase system.

three phase to single phase cycloconverter

single phase full converter

Single Phase Induction Motor

The power consumed in a circuit element will be least when the phase difference between the current and voltage is?

An unshielded moving iron voltmeter is used to measure the voltage in an AC circuit. The stray DC magnetic field having a component along the axis will be  (1) unaffected (2) decreased (3) increased (4) either decreased or increased depending on the direction of the DC field

A parallel AC. circuit in resonance will?

In an AC. circuit, a low value of kVAR compared with kW indicates?

Can you apply Thevenin's theorem in an AC circuit?

Can we apply Norton's theorem in an AC circuit?

What is the purpose of a capacitor in an AC circuit?

Explain single line diagram.

Draw the waveform of three phase AC supply voltage.

Write short notes on 3 phase AC system.

A switch tail ring counter is made by using a single D-FF. The resulting circuit is (A) T-FF (B) D-FF (C) SR-FF (D) JK-FF