# Salient pole rotor is use for which speed?

27 views

Salient pole rotor is use for which speed?

Salient pole rotor is use for low and medium speed prime movers.

## Related questions

Which rotor is use for high speed in turbo alternators?

The armature current on symmetrical 3 phase short circuit of a synchronous machine (salient pole)  (A) has q -axis current only (B) has d -axis current only (C) has both d and q axis currents (D) cannot be divided between q and d axis currents

what will happen when excitation of an unloaded salient pole synchronous motor suddenly gets disconnected?

An electric motor in which both stator field and rotor rotates with same speed is called?

Is the speed of alternator is directly proportional to frequency?

State any four salient features of turbo- alternator.

List out any four salient features of hydro generator.

In dc machines, the armature windings are placed on the rotor because of the necessity for  (1) electromechanical energy conversion (2) generation of voltage (3) commutation (4) development of torque

Ratio of the rotor reactance X to the rotor resistance R for a two-phase servo motor (A) is equal to that of a normal induction motor (B) is less than that of a normal induction motor (C) is greater than that of a normal induction motor (D) may be less or greater than that of a normal induction motor

The speed of a 2-pole, 3-phase stepper motor operated by 1200 pulses/min (A) 100 rpm (B) 200 rpm (C) 400 rpm (D) 800 rpm

The synchronous speed of an 8 pole induction motor supplied power from a 50 Hz source will be ?

The rotor impedance of a slip ring induction motor is (0.1 + j0.6)Ohm/ ph . The resistance/ph to be inserted into rotor to get maximum torque at starting should be

What is the rotor of a motor?

The number of cycles in which a high speed circuit breaker can complete its operation is  (A) 3 to 8 (B) 10 to 18 (C) 20 to 30 (D) 40 to 50

Explain the working of shaded pole induction motor.

A 50 Hz, 4 pole turboalternator rated at 20 MVA. 13.2 KV has an inertia constant H = 4 KW sec/KVA. The K.E. stored in the rotor at synchronous speed is

Explain MOSFET gate drive circuit and totem pole configuration.

In an adjustable speed ac drive which quantity gets reduced above rated speed ? (A) developed torque (B) stator frequency (C) reduced starting torque (D) stator current

Synchronous motor always runs at which speed?

Which motor has the best speed regulation?

Can I use C++ for Arduino?

Can you use Python for Arduino?

The maximum constant load torque under which a synchronous motor will pull into synchronism at rated rotor supply voltage and frequency is known as?

What is the use of diode in the circuit?

Use of auto-transformer is economical when the transformation ratio is?

What is the use of a thyristor in a circuit?

What is the use of a Mosfet?