When a transmission line is energized, the wave that propagates on it is?

23 views

When a transmission line is energized, the wave that propagates on it is current wave and voltage wave.

Related questions

A transmission line has 1 P.0 impedance on a base of 11 KV, 100 MVA. On a base of 55 KV. it will have a P.0 impedance of

For a short transmission line with r/x ratio of is 1.0, the regulation will be zero when the load power factor is

Transmission efficiency of a transmission line increases with the

A 50Ω transmission line is terminated in an impedance of 20-j50. What will be the reflection coefficient? A) 0.69 B) 1.69 C) 6.9 D) 16.9

The sag of a transmission line is least affected by (A) Self weight of the conductor. (B) Temperature of the surrounding air. (C) Current through the conductor. (D) Ice deposited on the conductor.

A transmission line of 200 km has a certain A, B, C and D parameters. If the length is reduced to 60 km

The sending end and receiving end voltages of a three-phase transmission line are 10 kV/ph and 9.5 kV/ph, respectively. If the resistance drop is 150 V/ph and receiving end power factor is 0.8, the sending end power factor is (A) 0.745 lagging (B) 0.775 lagging (C) 0.8 lagging (D) 0.85 lagging

What are the losses in a transmission line?

Stability of a transmission line can be increased by

In a transmission line if booster transformers are to be used, preferred location will be  (A) At the receiving end (B) At the sending end (C) At the intermediate point (D) Anywhere in the line

Series capacitive compensation in EHV transmission line is used to

what is mean by medium transmission line ?

what is mean by short transmission line ?

what is mean by long transmission line ?

lf a travelling-wave travelling along a loss-less overhead line does not result in any reflection after it has reached the far end, then the far end of the line is

The reactive power transfer over a line mainly depends on

A lightening arrester connected between the line and earth in a power system  (1) protects the terminal equipment against travelling surges (2) protects the transmission line against direct lightening strokes (3) suppresses high frequency oscillations in the line (4) reflects back the travelling wave approaching it

The command line interpreter that enables the users to interact with operating system is called the A) Window B) Shell C) Process D) Kernel

The surge impedance for over head line is taken as  (1) 10-20 ohms (2) 50-60 ohms (3) 100-200 ohms (4) 1000-2000 ohms

Pure inductive circuit takes power from the A.C. line when?

The voltage of transmission can be regulated by  (A) Use of tap changing transformers (B) Switching in shunt capacitors at the receiving end during heavy loads (C) Use of capacitors to neutralize the effect of series reactance (D) Any of the above methods

The velocity of travelling wave through a cable of relative permittivity 36 is

The equation of 50 Hz current sine wave having r.m.s. value of 60 A is?

For a sine wave with peak value Imax the r.m.s. value is?

Form factor for a sine wave is?

How many insulator disc used for 33 kV transmission voltage line?

The coefficient of reflection for current wave is

The fractional-pitch used for eliminating 7th harmonic from the emf wave of an alternator is (A) 2/3 (B) 5/6 (C) 7/8 (D) 6/7

What is the speed of an electromagnetic wave in water?

If 3000 kW power is to be transmitted over a distance of 30 km, the desirable transmission voltage will be.  (A) 11 kV (B) 33 kV (C) 66 kV (D) 132 kV

What is the job of a servo in a transmission?

Instantaneous value of a sine wave voltage

Draw a labeled block diagram of sine wave generator and state function of each block.