# If the speed of a D.C. shunt motor is increased, the back e.m.f. of the motor will?

26 views
in DC motor

If the speed of a D.C. shunt motor is increased, the back e.m.f. of the motor will increase.

## Related questions

Why does the speed of a DC shunt motor decrease as the load increases?

A 240 V, dc shunt motor draws 15 A while supplying the rated load at a speed of 80 rad/s. The armature resistance is 0.5 W and the field winding resistance is 80 W. The net Voltage across armature resistance at the time of plugging will be

As there is no back e.m.f. at the instant of starting a D.C. motor, in order to prevent a heavy current from flowing though the armature circuit?

The counter e.m.f. of a d.c. motor?

The speed of a D.C. motor can be controlled by varying  1. Its flux per pole 2. Resistance of armature circuit 3. Applied voltage 4. All of the above

A shunt generator running at 1000 r.p.m. has generated e.m.f. as 200 V. If the speed increases to 1200 r.p.m., the generated e.m.f. will be nearly?

A 200 V dc shunt motor is running at 1000 rpm and drawing a current of 10 A. Its armature winding resistance is 2 Ohm. It. is braked by plugging. The resistance to be connected in series with armature to restrict armature current to 10 A, is

The no-load speed of a single-phase SCR bridge converter fed separately excited dc motor operating at a firing delay angle, α and flux, Φ (A) directly proportional to α and Φ (B) inversely proportional to α and Φ (C) directly proportional to α and inversely proportional to Φ (D) directly proportional to Φ and inversely proportional to α

The e.m.f. induced in the armature of a shunt generator is 600 V. The armature resistance is 0.1 ohm. If the armature current is 200 A, the terminal voltage will be?

If load on a d.c. shunt motor is increased, its speed is decreased due primarily to?

What are the speed control methods of dc motor?

The induced e.m.f. in the armature conductors of a d.c. motor is?

The Eb/V ratio of a d.c. motor is an indication of its?

The normal value of the armature resistance of a d.c. motor is?

In a d.c. motor, unidirectional torque is produced with the help of

D.C. motor is to a drive a load which is almost nil for certain part of the load cycle and peak value for short duration. We will select the?

D.C. motor is to drive a load which has certain minimum value for most of the time and some peak value for short duration. We will select the?

Under constant load conditions, the speed of a d.c. motor is affected by?