# In a D.C. generator the number of mechanical degrees and electrical degrees will be the same when?

381 views

In a D.C. generator the number of mechanical degrees and electrical degrees will be the same when number of poles is 2.

## Related questions

For a D.C. generator when the number of poles and the number of armature conductors is fixed, then which winding will give the higher e.m.f. ?

The fall in speed of a dc generator due to increase in load can be corrected by  (1) cooling the armature.. (2) increasing the excitation. (3) reducing the load voltage. (4) increasing the input to the prime mover

The eddy current loss in a dc generator is 400 W at 40 Hz frequency of reversal and constant flux density. When frequency is increased to 50 Hz., eddy current loss is :  (A) 256 W (B) 320 W (C) 500 W (D) 625 W

In a DC generator the windings of interpoles are connected :  (A) in series with main field winding, to create a pole,of same polarity as the main pole ahead in the direction of rotation.  (B) in series with main field winding, to create a pole of opposite polarity as the main pole ahead in the direction of ... in the direction of rotation.  (D) in series with the armature winding, to create a pole of opposite polarity as the main pole ahead in the direction of rotation.

What is the difference between an AC and DC generator?

The terminal characteristics of a dc generator suitable for electric welders is (A) separately excited generator (B) shunt generator (C) series generator (D) differentially compounded generator

A 200 V DC machine supplies 20 A at 200 V as a generator. The armature resistance is 0.2 Ohm. If the machine is now operated as a motor at same terminal voltage and current but with the flux increased by 10%, the ratio of motor speed to generator speed is

What is the choice of size and number of generator units in interconnected power system?

What is the principle of DC generator?

Why is the armature of DC generator laminated?