Ask a Question
In order to achieve high accuracy, the slide wire of a potentiometer should be?
Electrical Measurements and Instrumentation
to add a comment.
← Prev Question
Next Question →
to answer this question.
In order to achieve high accuracy, the slide wire of a potentiometer should be
as long as possible.
to add a comment.
In an AC. co-ordinate potentiometer, the currents in the phase and quadrature potentiometer are adjusted to be?
To measure a resistance with the help of a potentiometer it is?
A potentiometer may be used for?
The stator of phase shifting transformer for use in conjunction with an A.C. potentiometer usually has a?
To measure an A. C. voltage by using an A.C. potentiometer, it is desirable that...
A d.c. potentiometer is designed to measure up to about 2V with a slide wire of 800 mm. A standard cell of
When the voltage across a battery is measured using a D.C potentiometer, the reading shows 1.08 V. But
Why should switch be connected only on the live wire and never on the neutral wire?
The ground wire should not be smaller than No ______ copper.
Basically a potentiometer is a device for?
A rheostat differs from potentiometer in the respect that it?
A fuse wire should have :
A trolley wire weighs 1.2 kg per meter length. The ends of the wire are attached to two poles 20 meters apart...
Wire-wound resistors are unsuitable for use at high frequencies because they?
The resistance of a few meters of wire conductor in closed electrical circuit is?
If a wire conductor of 0.2 ohm resistance is doubled in length, its resistance becomes?
can we use potentiometer for measuring resistance?
The function of steel wire in ACSR conductors is
lf the wire which is vertical to this page has electron flow downwards the conductor will have
Increasing the number of turns of wire on the secondary of a transformer will
For a round wire, the approximate value of fusing current is given by
Aluminium is not used as winding wire for the armature of a dc machine because
State functions of ; i) Cable box ii) Guard wire iii) Shackle insulator iv) Stay wire used in service connection
The burden value in Potential Transformer (PT) should be ______ to achieve low errors in PT:
What happens when a neutral wire touches a phase wire ?
Which wire can carry a higher current stranded wire or solid wire?
What happens when a current flows through a wire?
How is electricity passed through a wire?
Nichrome wire is an alloy of?
How do magnets and copper wire make electricity?
What is ACCC wire?
Which color wire is neutral?
The internal resistance of the voltmeter must be very high in order to have
In a single phase induction motor driving a fan load, the reason for having a high resistance rotor is to achieve
The resolution of a potentiometer should be:...
What is the number of turns of wire needed to provide a potentiometer with a resolution of 0.05 percent ?
In the case of an instrument reading of 8.3 V with a 0 to 150 voltmeter having a guaranteed accuracy of
A 10A DC Ammeter has a resistance of 0.1 Ω is to be extended to 50 A, the required shunt wire is
In order to reduce the harmful effects of harmonics on the AC side of a high voltage DC transmission system...
For high accuracy the meter has
The resistance in the circuit of the moving coil of a dynamometer wattmeter should be?
For a 2nd order feedback control system, the peak resonance magnitude should be Mp ≤ 1.15. Hence the
An ammeter has a current change of 0—5A and its internal resistance is 0.2 ohm. In order to Change the range
In order to increase the range of a voltmeter
The repeat accuracy of an instrument can be judged from its
The electrostatic instruments can be used without serious loss of accuracy upto ......... frequency
The function of the earth wire in an extra high voltage line is to?
Which scanner can be used to image a 3-dimensional object? (1) Drum (2) Slide/Film (3) Microfilm ...
The material used for fuse wire should be of
In a dynamo-meter type of moving coil instrument a swamping resistance is provided in order to: