# The two pressure coils of a single phase power factor meter have?

13 views

The two pressure coils of a single phase power factor meter have the same dimensions and the same number of turns.

## Related questions

What is the power factor when a single phase watt meter operating on 200 V and 5 A for 5 hours makes 2016 revolutions and the meter constant in revolution is 420? A) 0.04 B) 1.04 C) 0.96 D) None of these

With a neat sketch explain working of 1 phase dynamometer type power factor meter.

The disc of a single phase Induction-type energy meter makes 60 revolutions in 6 minutes. Meter Constant is 1200 rev/kWh. Power consumption in the load is (A) 1.2 kW (B) 1 kW (C) 600 W (D) 500 W

Explain power in single phase AC circuit.

In an alternator at lagging power factor the generated voltage per phase as compared to that at unity power factor?

In a 3-phase power measurement by two wattmeter method the reading of one of the wattmeter was zero. The power factor of the load must be?

In a 3-phase power measurement by two wattmeter method, both the watt meters had identical readings. The power factor of the load was?

A single core cable is designed to work for a single phase system with a peak voltage of 220 kV. The maximum permissible stress in the dielectric is not to exceed 20 kV/mm. For economical size, the overall core diameter of the cable is (A) 28.2 mm (B) 26.4 mm (C) 24.4 mm (D) 22.0 mm

The potential coil of a single phase dynamometer wattmeter has 4840 Ohm resistance. Voltage across the load is 220 V. With the potential coil connected on the load side, the meter indicates 100 W. Approximate percentage error due to wattmeter connection is (A) 11% (B) 9% (C) 1.1% (D) 3%

The running winding of a single phase motor on testing with meggar is found to be ground. Most probable location of the ground will be?

A single phase transformer has resistance and reactance of 0.2 pu and 0.6 pu respectively. Its pu voltage regulation at 0.8 pf lagging would he

What is the slip (as a percentage) when a 6 pole single phase induction motor operating on 220 V and 60 Hz is rotating at speed of 1140 rpm? A) 60% B) 5% C) 10% D) None of these

Describe the gate circuit for a single phase full converter.

State the meaning of creeping error in 1 phase energy meter.

State the application of phase sequence indicator; clip on ammeter, frequency meter & P.F. meter.

What are the five types of single phase motors used in the industry?

explain the working of single phase induction motor.

A capacitor-start single phase induction motor is switched on to supply with its capacitor replaced by an inductor of equivalent reactance value. It will?

How does a single phase induction motor work?

Can you have a power factor greater than 1?

State any four advantages of three phase over single phase.

An unexcited single phase synchronous motor is ?

write short notes on single phase system.

three phase to single phase cycloconverter

single phase full converter

Single Phase Induction Motor

A 200 V, 5 A d.c. energy meter is tested at its marked ratings. The resistance of the pressure circuit is 8000 Ω and that of current coil is 0.1 Ω. The power consumed when testing the meter with phantom loading with current circuit excited by a 6 V battery is (A) 2.5 W (B) 5 W (C) 32.5 W (D) 35 W

Explain the “mitigation of power theft” and “faulty meter replacement” for energy conservation techniques to reduce commercial losses.

List any two methods of reactive power measurement in 3 phase circuit.