# The circuit has resistors, capacitors and semi-conductor diodes. The circuit will be known as?

17 views

The circuit has resistors, capacitors and semi-conductor diodes. The circuit will be known as

The circuit has resistors, capacitors and semi-conductor diodes. The circuit will be known as non-linear circuit.

## Related questions

Consider a circuit with four 10 Ω resistors connected in parallel and the current flowing through the circuit is 5 A. What will be the current if the above 4 resistors are connected in parallel? A) 5 A B) 50 A C) 500 A D) None of these

A network contains linear resistors and ideal voltage sources. If values of all the resistors are doubled then the voltage across each resistor will

A star circuit has element of resistance R/2. The equivalent delta elements will be?

Which of the following are known as the short circuit parameters of a 2- port network? (A) Z- parameters. (B) H- parameters. (C) Y- parameters. (D) A,B,C,D, parameters.

The circuit whose properties are same in either direction is known as?

What is the charge on each capacitor when a 150 V is applied across two capacitors with values 5 μF and 10 μF, connected in series? A) 500 μC B) 0.5 μC C) 0.5 C D) None of these

Consider a circuit with four resistors in series connected to a voltage source. What happens to the voltage across each resistor, if the value of each of the resistors is doubled? A) It will double B) It will remain the same C) It will be halved D) It will become zero

Two resistors are said to be connected in series when?

An electrical circuit with 10 branches and 7 junctions will have

Three identical resistors are first connected in parallel and then in series. The resultant resistance of the first combination to the second will be?

A voltage signal 10 Sinwt is applied to the circuit with ideal diodes, as shown in figure. The maximum and minimum values of the output waveform vout of the circuit are respectively

What are the different types of capacitors?

State any four types of capacitors.

Capacitors for power factor correction are rated in?

Which capacitors are suitable for DC filter circuits?

The colour band on the extreme left in general purpose fixed resistors represents: A) Tolerance B) First significant digit C) Wattage Rating D) Voltage Rating

Three identical resistors connected in star consume 5000 W. If the resistors are connected in delta across the same supply, the power consumed will be

What is the total resistance if 5 resistors of 20 Ω each are connected in series? A) 100 Ω B) 4 Ω C) 20 Ω D) None of these

If resistance is 20 Q. and inductance is 27 in a R-L series circuit, then time constant of this circuit will be?

State any two features of carbon composition resistors.

When three resistors with unequal values are connected in parallel, _______ A) The current across the resistors is the same  B) The voltage drop across the resistors is the same C) The voltage drops across the resistors is proportional to the resistance of each resistor D) None of these

Voltage dependent resistors are used?

Voltage dependent resistors are usually made from?

Wire-wound resistors are unsuitable for use at high frequencies because they?

In an ac series RLC circuit, the voltage across R and L is 20 V; voltage across L and C is 9 V and voltage across RLC is 15 V. What is the voltage across C?

If the % reactance upto the fault point is 20%, then the short circuit current will be

In parallel RLC resonance circuit at resonance the current will be  (1) Minimum (2) Maximum (3) Zero (4) Infinite

Which of the following is true with a series circuit having resistors of different values? A) The total resistance of the circuit is the sum of the individual resistances B) The current across each resistor is the same C) The voltage drop across each resistor depends on the value of the resistor D) All the above

A series R-L-C Circuit has a resonant frequency of 1000 Hz. If the values of R, L and C are doubled, the new resonant frequency is

Mention the precautions to be taken while connecting CT and PT in the circuit.

The resistance of a few meters of wire conductor in closed electrical circuit is?

A type of conductor known as expanded ACSR has a filler separating inner steel strands from outer aluminium strands and this filler is (a) mica sheet (c) paper tape (b) cotton tape (d) aluminium foil

In a pure resistive circuit, the average power Pavg is ______ the peak power Pmax. (1) Double (2) One-half of (3) One-fourth (4) Equal to

A DC voltage source is connected across a series RLC circuit. Under steady-state conditions, the applied DC voltage drops entirely across the

In a series RLC high Q circuit, the current peaks at a frequency  (1) equal to the resonant frequency (2) greater than the resonant frequency (3) less than the resonant frequency (4) equal to half the resonant frequency

As a network contains only independent current sources and resistors then if the values of all resistors are doubled then the values of the node voltages are   (A) will become half (B) will remain unchanged (C) will become double (D) cannot be determined unless the circuit configuration and the values of the resistors are known.

A d.c. source has an open circuit voltage of 30 V and an internal resistance of 1.5 Ohm. A resistive load is connected to the source. Maximum power dissipated in the load is (A) 300 W (B) 150 W (C) 45 W (D) 20 W

What is a node in an electrical circuit?

What is mesh in circuit theory?

The effective resistance of a conductor will be the same as ohmic resistance when : -  a) current is in true sine wave form b) voltage is low c) power factor is unity d) current is uniformly distributed in the conductor cross-section

When one leg of parallel circuit is opened out the total current will?