# A closed path made by several branches of the network is known as?

22 views
A closed path made by several branches of the network is known as?

A closed path made by several branches of the network is known as loop.

## Related questions

A network which contains one or more than one source of e.m.f. is known as?

Which of the following are known as the short circuit parameters of a 2- port network? (A) Z- parameters. (B) H- parameters. (C) Y- parameters. (D) A,B,C,D, parameters.

The number of independent loops for a network with n nodes and b branches is

A network consists of several inductances connected in parallel. The equivalent inductance of the network is given by (A) the sum of the individual inductances. (B) the reciprocal of the sum of the individual inductances. (C) the sum of the reciprocals of individual inductances. (D) the reciprocal of the sum of reciprocals of individual inductances.

What do you mean by network theory?

A network contains linear resistors and ideal voltage sources. If values of all the resistors are doubled then the voltage across each resistor will

A network is said to be under resonance when the voltage and the current at the network input terminals are (A) in phase (B) out of phase (C) in phase quadrature (D) in phase, and have equal magnitudes

A passive network is one which contains?

Generally in a power system network, the load is represented as a :  (A) Constant power in both load flow study and in stability study  (B) Constant power in load flow study and constant impedance in stability study  (C) Constant power in stability study and constant impedance in load flow study  (D) Constant impedance in both load flow study and in stability study

A non-linear network does not satisfy?

What is active and passive network?

A terminal where three on more branches meet is known as?

A network that consists of at least a voltage source or current source is called A) Active network B) Ideal network C) Sourced network D) Outsourced network

What do you mean by bilateral network and unilateral network?

The number of loop equations required to completely analysing a network comprising of 8 independent branches and 6 nodes including the reference node shall be A) 3 B) 2 C) 4 D) 5

A Two-Port Network is said to be symmetrical when the following equalities hold good (A) Z11 = Z22 and Z12 = Z21 (B) Z11 = Z22 (C) Y12 = Y21 (D) Y11 = Y22 and Y12 = Y21

If the number of branches in a network is 'B', the number of nodes is 'N' and the number of dependent loops is 'L', then the number of independent node equations will be  (a) N+L–1 (b) B–1 (c) B–N (d) N–1

The power flow problem mathematical model for a linear transmission network (A) is non-linear (B) is linear (C) considers time variation of generation (D) does not consider tap-changing transformers

When the graph of a network has six branches with three tree branches then the minimum number of equations required for the solution of the network is   (A) 2 (B) 3 (C) 4 (D) 5

A passive network

Norton’s theorem states that a complex network connected to a load can be replaced with an equivalent impedance (A) in series with a current source (B) in parallel with a voltage source (C) in series with a voltage source (D) in parallel with a current source

In relation to embedded Linux how TCP/IP networking is done? Explain network configuration.

With n nodes and b branches a network will have   (A) (b+n) links (B) b - n +1 links (C) b -n-1 links (D) b + n + 1 links

As a network contains only independent current sources and resistors then if the values of all resistors are doubled then the values of the node voltages are   (A) will become half (B) will remain unchanged (C) will become double (D) cannot be determined unless the circuit configuration and the values of the resistors are known.

____ is known as a computer network in which one centralized, powerful computer is a hub to which many less powerful personal computers or workstations are connected. The clients run programs and access data that stored on the server.  a) Client-Server network b) Extranet c) Internet d) None of the above.

The circuit whose properties are same in either direction is known as?

A network has 10 nodes and 17 branches. The number of independent mesh equations required to solve the network is   (a) 7 (b) 8 (c) 10 (d) 45

Two port networks are connected in cascade. The parameters of the network are obtained by multiplying in individual

The property of materials by which they can be drawn into wires is known as: A) malleability B) elasticity C) creep D) ductility

In a series parallel circuit, any two resistances in the same current path must be in?

The circuit has resistors, capacitors and semi-conductor diodes. The circuit will be known as

The switch in the circuit has been closed for a long time. It is opened at t = 0. At t = 0+, the current through the 1 micro farad capacitor is A) 0A B) 1A C) 1.25A D) 5A

The number of independent equations to solve a network is equal to?

A passive two port network is in a steady state. Compared to its input, the steady state output can never offer  A) Higher voltage B) Lower impedance C) Greater power D) Better regulation

Consider the star network shown in figure. The resistance between terminals A and B with C open is 6 ohms, between terminals B and C withAopen is 11 ohms and between terminals C andAwith B open is 9 ohms. Then RA, RB, RC respectively is

A passive 2-port network is in a steady state, compared to its input, the steady state output can never offer   (a) Higher voltage (b) Lower impedance (c) Greater power (d) Better regulation

"Maximum power output is obtained from a network when the load resistance is equal to the output resistance of the network as seen from the terminals of the load". The above statement is associated with?

A casting defect which occurs near the ingates as rough lumps on the surface of a casting is known as 1. Shift 2. Sand wash 3. Swell 4. Scab