# In conductors conduction of electricity takes place due to movement of

13 views

In conductors conduction of electricity takes place due to movement of electrons only.

## Related questions

In a magnetic material hysteresis loss takes place primarily due to?

The conductors have transport phenomena of electrons due to

In case of semi-conductors, the ratio of conduction current to displacement current is: A) more than 200 and less than 1000 B) less than 100 but greater than 1/100 C) less than 1/100 D) more than 1000

The skin effect in conductors is due to non uniform distribution of current in it and major portion of current is near the _______ of conductor.  (1) Surface (2) Center (3) Complete cross section area (4) Axis

When bundle conductors are used in place of single conductors, the effective inductance and capacitance will respectively

List out the different technical losses that takes place in Transmission and Distribution system.

Galloping in transmission line conductors arises generally due to - (A) asymmetrical layer of ice formation (B) vortex phenomenon in light winds (C) heavy weight of line conductors (D) adoption of horizontal conductor

Turn-on of a thyristor (SCR) takes place when  A) Anode to cathode voltage is positive B) Anode to cathode voltage is negative C) Positive current is applied to gate D) Anode to cathode voltage is positive and positive current pulse is applied to gate

The superconductivity is due to

In a DC motor, it is important to place the brushes along ______ A) Magnetic Neutral Axis B) Normal Geometric Axis C) Nominal Geometric Axis D) None of these

A 1mA D' Arsonval movement has resistance of 100 Ω. It is to be converted to a 10 V voltmeter. The value of multiplier resistance is  (A) 999 Ω (B) 9999 Ω (C) 9900 Ω (D) 990 Ω

What is the movement of electrons from atom to atom is called?

How much time a diode takes to switch ON in forward bias condition.

Two long parallel conductors carry 100 A. If the conductors are separated by 20 mm, the force per meter of length of each conductor will be

State the effects of errors in dynamometer type wattmeter due to i) pc- inductance ii) pc- capacitance iii) mutual inductance iv) Connection.

In an AC transmission line difference in phase of voltage at two ends of the line is due to (a) System voltage (b) Insulators (c) Resistance of line (d) Reactance of line

The presence of alkali oxides in alumino silicate ceramics is likely to result in dielectric breakdown due to   (A) Polarization (B) Conductivity (C) Structural homogeneties (D) Ionization

In a power transformer, the fundamental frequency of the hum arising due to magnetostriction is  (a) equal to the line frequency (b) double the line frequency (c) 4 times the line frequency (d) not related to the line frequency

The fall in speed of a dc generator due to increase in load can be corrected by  (1) cooling the armature.. (2) increasing the excitation. (3) reducing the load voltage. (4) increasing the input to the prime mover

In induction type directional over current relay the driving torque is due to interaction of magnetic fields derived from (A) current in the potential coil (B) both voltage and current in the relay windings (C) directional element and non-directional element (D) non-directional element and the trip circuit

The main sources of Errors in Permanent Magnet moving Coil (PMMC) are due to : - a) weaking of the permanent magnet due to aging at temperature effects b) weaking of spring due to aging and temperature effects c) change of resistance of the moving coil with temperature d) all the above

Heat in a conductor is produced on the passage of electric current due to?

It is desired to convert a 0-1000A meter movement, with an internal resistance of 100 ohms, into a 0-100mA meter. The required value of shunt resistance is about

If 5000 kW power is transmitted at 220 kV in place of 11 kV, reduction in the value of electric current will be (a) 90% (b) 95% (c) 5% (d) 10%

A 3-phase voltage source inverter is operated in 180o conduction mode. Which one of the following statements is true ?  (A) Both pole-voltage and line-voltage will have 3rd harmonic components (B) Pole-voltage will have 3rd harmonic component but line-voltage will be free from 3rd harmonic (C) Line-voltage will have 3rd harmonic component but pole-voltage will be free from 3rd harmonic (D) Both pole-voltage and line-voltage will be free from 3rd harmonic components

In practice, Earth is chosen as a place of zero electric potential because it

A 200 V dc motor takes a field current of 2 A to generate a back emf of 180 V. If the field winding resistance is 80 Ω, the resistance of the shunt field regulator is (A) 10 Ω (B) 20 Ω (C) 100 Ω (D) 180 Ω

If it takes 400 ms to use 12,000 J of energy, the power is? A.30 kW B.30 W C.3 W D.300 kW

A ______ Instruction at the end of interrupt service program takes the execution back to the interrupted program.   (a) Forward (b) Return (c) Data (d) Line

The cycle time of a PLC is the time it takes to   (a) read all the input signals. (b) read all the input signals, run the program and update outputs. (c) read an input signal. (d) check all the input signals against the program.

Bundled conductors are mainly used in high voltage overhead transmission lines to (a) Reduce line loss (c) Reduce corona (b) Reduce harmonics (d) Increase strength

Hollow conductors are used in the transmission lines to:  (1) Improve heat dissipation (2) Reduce corona loss (3) Reduce skin effect (4) Reduce the line inductance

The best place to install a capacitor is?

Justify. Power MOSFET is operated at high enough gate source voltage to minimize the conduction losses.

What arc the errors occurring in measuring devices due to stray magnetic field and temp '? Explain how to compensate them.

In communication systems, noise due to quantization error is a) Linear and signal dependent b) Non-linear and signal dependent c) Linear and signal independent at low frequencies only d) non -linear and signal dependent at low frequencies only