# Fermi energy is the amount of energy which

13 views

Fermi energy is the amount of energy which Must be given to an electron to move it to conduction band.

## Related questions

what is fermi energy

Which of the following device is used for coupling microwave energy?  A) Resonator B) Waveguide C) Loop D) Antenna

Define (i) Intrinsic semiconductor (ii)Fermi energy level

Fermi level is the measure of  (A) Doping of electrons (B) Probability of occupancy of electrons or holes (C) Probability of occupancy of photons (D) Probability of occupancy of wavelength

The amplifier having the highest amount of distortion is (a) Class A (b) Class B (c) Class C (d) Class AB

The amount of substance liberated at the electrode when current of one Ampere is passed though the electrolyte for one second is

kWh meter is the electric meter that measures the amount of electrical _________ in kWh that was consumed in the house.  (A) Energy (B) Current (C) Voltage (D) None of the above

Phase margin is the amount of angle to make the system  (1) Oscillatory (2) Stable (3) Unstable (4) Exponential

"Electric flux enclosed by a surface surrounding a charge is equal to the amount of charge enclosed." This is the statement of

The amount of solar radiation received on a unit area exposed perpendicular to sunlight is termed as : (A) Solar insulation (B) Solar constant (C) Solar radiance (D) Solar insolation

The amount of current flowing through a circuit with a 40 V source and 6.8 kΩ of resistance is equal to: A. 27.2 mA B. 59 mA C. 5.9 mA D. 590 mA

The disc of domestic supply energy meter is made of which material ? (a) Zinc (b) Copper (c) Aluminium (d) Silver

If temperature of a radiating body is 1500 °C, the wavelength at which maximum radiant energy occurs is (a) 2.87 µm (b) 1.63 µm (c) 1.01 µm (d) 20.85 µm

Which of the following is true regarding the band-gap energy of a semiconductor ? (A) Minimum energy required to break a covalent bond (B) On breaking of the bond, electron is generated (C) On breaking of the bond, electron-hole pair is generated (D) A & C both are true

Which one is a vector quantity out of the followings?  A. Energy B. Volume C. Area D. Force

In a single crystal of an intrinsic semiconductor, the number of free carriers at the Fermi level at room temperature is: A) Half the total number of electrons in the crystal B) Zero C) Half the number of atoms in the crystal D) Half the number of free electrons in the crystal

In an intrinsic semiconductor the Fermi level is (a) closer to valence band. (b) closer to conduction band. (c) within the balance band. (d) midway between the valence and conduction bands.

What amount of current will flow through resistance of 10 ohms when it is connected across a potential difference of 20 volts? A.30 amperes B.5 amperes C.10 amperes D.2 amperes

The amount of current in a resistor needs to be changed from 120 mA to 160 mA by changing the 24 V source, the new voltage will be: A. 8 V B. 320 V C. 3.2 V D. 32 V

An element which consumes energy instead of storing in it is  a. Resistor b. Inductor c. Capacitor d. Conductor

Phantom loading for testing of energy meter is used (A) to isolate the current and potential circuits (B) to increase power loss during testing (C) for meters having low current ratings (D) to test meters having a large current rating for which loads may not be available

In an n-type semiconductor, as the donor concentration ND increases, the Fermi level EF: (1) Remains unaltered (2) Moves towards the conduction band (3) Move towards the center of forbidden energy gap (4) May or may not move depending on temperature

Which of the following is a negative-resistance microwave device for oscillator applications? A) IMPATT Diode B) Gunn Diode C) Snap diode D) Schottky Diode

Which one of the following is another name for common-collector amplifier?  A) Source follower B) Collector follower C) Base follower D) Emitter follower

Which of the following materials is used in the construction of thermistors? A) Pure metal B) Pure semiconductor C) Pure insulator D) Sintered mixture of metal oxides

In thermo-couple instruments, in which of the following is an emf caused if the junction of two wires of dissimilar metals is heated and the free or cold ends are connected to a milli-voltmeter? A) Kelvin effect B) Hot wire effect C) Seebeck effect D) Faraday effect

Which of the following oscillators is used for generation of high frequency signal ? (a) RC phase shift oscillator (b) Blocking oscillator (c) Wein bridge oscillator (d) L-C oscillator

The set of transistor characteristics which enable α to be determined directly from the slope is (a) CB transfer characteristics (b) CE transfer characteristics (c) CB input characteristics (d) CE output characteristics

For a series resonant circuit, at the half power points,which of the following is true?  (a) Current is half of the current at resonance. (b) Resistance is equal to the reactance. (c) The impedance is half the impedance at the resonance. (d) None of the above

Beta cut-off frequency of a transistor is the frequency at which the Beta is • 0.707 of low frequency value • Zero • Equal to low frequency value • None of the above.

Pinch off voltage of a J FET is the drain to source voltage above which drain current. • Increases • Decreases • Remains constant • Becomes zero

For a rotameter, which one of the following statements is TRUE? (A) The weight of the float is balanced by the buoyancy and the drag force acting on the float (B) The velocity of the fluid remains constant for all positions of the float (C) The measurement of volume flow rate of gas is not possible (D) The volume flow rate is insensitive to changes in density of the fluid

Which of the following is the natural abrasive (A) Al2O3 (B) SiC (C) boron carbide (D) corundum

Which of the following is only a power electronics component? (A) thyristor (B) diode (C) transistor (D) none of these

If the RF transmission is terminated in its Characteristic impedance Z, which of the following statements is wrong : a. The input impedance of transmission line becomes Zc. b. The transmission line acts as an infinite long transmission line. c. The VSWR becomes one d. The VSWR becomes infinite

Which of the following is a Read Only Memory storage device? A. Floppy Disc B. Hard Disc C. CD ROM D. None of these

In 8085 microprocessor with memory mapped I/O which of the following is true?  (1) I/O devices have 16 bit addresses (2) I/O devices are accessed during IN and OUT instructions (3) There can be a maximum of 256 input and 256 output devices (4) Logic operations can not be performed

Which of the following semiconductor materials is (are) used for manufacturing solar cells?  (1) Gallium arsenide (2) Indium arsenide (3) Cadmium sulfide (4) All of these

Which of the following diodes is limited to the reverse-bias region in its region of operation?  (1) Schottky (2) Tunnel (3) Photodiode (4) Rectifier

Which of the following is used as a data selector?  (1) Encoder (2) Decoder (3) Multiplexer (4) De-multiplexer

Which of the following is used extensively where lowest power consumption is necessary?  (1) CMOS (2) NMOS (3) PMOS (4) Any of the above

The noise is more dominant in which of the following:  (1) PAM (2) PWM (3) PPM (4) FSK

Which one of the following statements is correct? Digital modulation techniques are used in satellite communication systems since:  (1) They are easier to handle (2) Large bandwidth utilization is possible (3) They have a higher spectral efficiency (4) They are less prone to interference

Which of the following is a scalar quantity? a) Electric displacement density b) Potential in electric field c) Electric field strength d) None of the above

Which side of the diode is positive?

State any four periodical maintenance which is necessary in transformer to achieve energy conservation.