16 views
in Electrical engineering materials by

The working of a meter is based on the use of a permanent magnet. In order to protect the meter functioning from stray magnetic fields

1 Answer

0 votes
by

The working of a meter is based on the use of a permanent magnet. In order to protect the meter functioning from stray magnetic fields a soft iron shielding is used.

Related questions

1 answer 11 views
1 answer 22 views

The armature resistance of a permanent magnet dc motor is 0.8 Ohm. At no load, the motor draws 1.5 A from a supply voltage of 25 V and runs at 1500 rpm. The efficiency of the motor while it is operating on load at 1500 rpm drawing a current of 3.5 A from the same source will be  (A) 48.0% (B) 57.1% (C) 59.2% (D) 88.8%

asked May 17, 2018 in Electrical Machine by Shimroz123
0 answers 7 views

Q- meter is based on characteristics of  (A) Shunt resonant circuit (B) Series-parallel circuit (C) Series resonant circuit (D) Inductive reactance circuit 

asked Apr 5, 2018 in Electrical Engineering by Shimroz123
1 answer 14 views

A neodymium magnet is a permanent magnet made from an alloy of _________ A) Neodymium and iron B) Neodymium, iron and iodine C) Neodymium and boron D) Neodymium, iron and boron

asked Apr 29, 2018 in Electrical Engineering by Shimroz123
1 answer 20 views

A permanent magnet moving coil ammeter has a coil resistance of 99 ohm and Full Scale Deflection (FSD) current of 0.1mA. Shunt resistance is 1 ohm. Current through the meter at 0.5 F.S.D is:

asked May 22, 2018 in Electrical Measurements and Instrumentation by Shimroz123
1 answer 24 views

A permanent magnet stepper motor with 8 poles in stator and 6 poles in rotor will have a step angle of (a) 7.5° (b) 15° (c) 30° (d) 60°

asked Apr 25, 2018 in Electrical Engineering by Shimroz123
1 answer 25 views

The following motor definitely has a permanent magnet rotor  (A) DC commutator motor (B) Brushless dc motor (C) Stepper motor (D) Reluctance motor

asked May 17, 2018 in Electrical Machine by Shimroz123
1 answer 21 views

The main purpose of permanent magnet motors are (A) to avoid the need for field supply (B) to provide high flux density (C) to provide control over flux level (D) to facilitate kW rating

asked Apr 25, 2018 in Electrical Engineering by Shimroz123
1 answer 14 views

 The main sources of Errors in Permanent Magnet moving Coil (PMMC) are due to : - a) weaking of the permanent magnet due to aging at temperature effects b) weaking of spring due to aging and temperature effects c) change of resistance of the moving coil with temperature d) all the above

asked Apr 14, 2018 in Instrumentation and control by Shimroz123
1 answer 10 views

List out any four effects of electric current used in measuring instruments & write name of meter working on it.

asked Sep 6, 2018 by Shimroz123
1 answer 14 views

A rectangular magnet of magnetic moment M is cut into two piece of same length, the magnetic moment of each piece will be

asked Mar 29, 2018 in Electrical engineering materials by Shimroz123
1 answer 4 views

Write one application of each: i) Permanent Magnet ii) Electromagnet 

asked Sep 4, 2018 by Shimroz123
0 answers 12 views

Two voltmeters of same range, one moving iron type and other permanent magnet moving coil type, are connected in parallel for measuring a.c. supply voltage. If the reading of MI type is 300V, the reading of PMMC type will be (a) zero (b) higher-than M.I. type (c) lower than M.I. type (d) same

asked May 25, 2018 in Electrical Measurements and Instrumentation by Shimroz123
2 answers 114 views

Advantages and Disadvantages of Permanent Magnet Brushless DC (PMBLDC) Motor

asked Aug 9, 2017 in Electronics Engineering by Zeeshan
1 answer 7 views

What is permanent magnet and electromagnet?

asked Sep 4, 2018 by Shimroz123
1 answer 11 views

Name the material used for :- (i) Moving coil (ii) Permanent magnet in PMMC instrument.

asked Sep 6, 2018 by Shimroz123
1 answer 18 views

The operation of a ramp type Digital Voltmeter is based on the principle of (A) Voltage-to-current conversion. (B) Voltage-to-time conversion. (C) Current-to-time conversion. (D) Current-to-frequency conversion.

asked Apr 28, 2018 in Digital Instrumentation by Shimroz123
1 answer 10 views

State the function and shape of following parts used in induction type energy meter: i) Series magnet ii) Shunt magnet iii) Al disc iv) Brake magnet

asked Sep 6, 2018 by Shimroz123
2 answers 13 views
1 answer 17 views

The current coil of a single-phase energy meter is wound on (a) One limb of the laminated core (b) Both the limbs of the laminated core with same number of turns (c) Both the limbs of the laminated core with different number of turns (d) The centre of the limb on the laminated core

asked Apr 23, 2018 in Electrical Engineering by Shimroz123
1 answer 6 views

The swing equation for a synchronous machine is based on (A) relative motion between load angle and stator magnetic field (B) maximum power flow possible through a particular point (C) net torque and angular displacement (D) relation between excitation voltage and excitation current

asked Apr 25, 2018 in Electrical Engineering by Shimroz123
1 answer 15 views

With a neat sketch explain working of 1 phase dynamometer type power factor meter.

asked Sep 6, 2018 by Shimroz123
1 answer 17 views

Personal Computers use a number of chips mounted on a main circuit board. What is the common name for such boards? A. Mother boards B. Daughter boards C. Father boards D. Bread boards 

asked Apr 12, 2018 in Computer Engineering by Shimroz123
1 answer 15 views

Klystron operation is based on the principle of  a) Velocity modulation b) Amplitude modulation c) frequency modulation d) Phase modulation

asked Jun 15, 2018 in Electronics Engineering by Shimroz123
1 answer 16 views

The concept of an electrically short, medium and long line is primarily based on the  A) Nominal voltage of the line B) Physical length of the line C) Wave length of the line D) Power transmitted over the line

asked May 20, 2018 in Power system by Shimroz123
1 answer 13 views

The transfer of energy for reaction turbines is based on _______ A) Newton’s first law B) Newton’s second law C) Newton’s third law D) All the above

asked Apr 29, 2018 in Electrical Engineering by Shimroz123
0 answers 13 views

 For dynamic equalizing circuit used for series connected SCRs, the choice of C is based on (A) Reverse recovery characteristics (B) Turn -on characteristics (C) Turn-off characteristics (D) Rise time characteristics

asked Apr 14, 2018 in Electrical Engineering by Shimroz123
0 answers 10 views

The idea of cache memory is based on  (1) The property of locality of reference (2) The heuristic 90-10 rule (3) The fact that only a small portion of a program is referenced relatively frequently (4) All of these

asked Apr 10, 2018 in Computer Engineering by Shimroz123
0 answers 24 views

Principle of operation of LVDT is based on the variation of  A) Mutual inductance B) Self-inductance C) Capacitance D) Resistance

asked Apr 9, 2018 in Electronics Engineering by Shimroz123
1 answer 59 views

The nodal method of circuit analysis is based on  (A) KVL and ohms law (B) KVL and KCL (C) KCL and ohms law (D) Thevenins theorem

asked Apr 5, 2018 in Electrical Engineering by Shimroz123
1 answer 16 views

The insulation of modern EHV lines is designed based on?

asked Mar 27, 2018 in Power system by Shimroz123
1 answer 24 views

The superposition theorem is based on the concept of ?

asked Mar 16, 2018 in Electrical Engineering by Quiz
1 answer 14 views
1 answer 17 views

Draw and explain the working principle of turbine type flow meter. Mention its Application area.

asked Sep 13, 2018 by Shimroz123
2 answers 7 views

Explain the working principle of electromagnetic flow meter.

asked Sep 12, 2018 by Shimroz123
1 answer 110 views

Draw the diagram and explain the working of ferrodynamic type frequency meter. 

asked Sep 6, 2018 by Shimroz123
1 answer 4 views

Write the working of L-C-R meter with suitable sketch.

asked Sep 6, 2018 by Shimroz123
1 answer 41 views

The hysteresis and eddy current losses of a single phase transformer working on 200 V, 50 Hz supply are Ph and Pe respectively. The percentage decrease in these when operated on a 160 V, 40 Hz supply are   (a) 32, 36 (b) 20, 36 (c) 25, 50 (d) 40, 80 

asked May 13, 2018 in Transformer by Shimroz123
1 answer 16 views

In a DC shunt generator working on load, the brushes are moved forward in the direction of rotation, as a result of this, commutation will   (a) Improve but terminal voltage will fall   (b) Worsen and terminal voltage will fall   (c) Improve and terminal voltage will rise   (d) worsen and terminal voltage will rise 

asked May 13, 2018 in DC generator by Shimroz123
1 answer 17 views

In a P-N diode, assume that P-side is lightly doped and N-side is heavily doped. Based on this information, which of the following statement is true ? (A) Depletion region is more extended in P-side than N-side (B) Depletion region is more extended in N-side than P-side (C) Depletion region would be equal on both sides (D) Not enough information provided to give answer

asked May 12, 2018 in Semiconductor by Shimroz123
1 answer 24 views

What is the power factor when a single phase watt meter operating on 200 V and 5 A for 5 hours makes 2016 revolutions and the meter constant in revolution is 420? A) 0.04 B) 1.04 C) 0.96 D) None of these

asked Apr 29, 2018 in Electrical Engineering by Shimroz123

Welcome to electronics2electrical.com here you can ask questions related to electrical, electronics, mechanical, telecommunication, instrumentation, computer, mathematics, physics etc.
Be respectful to all the members. Do not copy and paste the answers from other websites which have copyright content. While asking question give full details about it.

Categories

Most popular tags

power motor dc circuit transformer voltage current used system phase resistance factor synchronous load ac energy induction electric generator series frequency between speed capacitor use electrical meter line difference control type mosfet transmission magnetic plant high single instrument bjt unit source advantages function diode and machine winding field define torque parallel amplifier supply shunt thyristor motors electricity arduino maximum time relay armature problem value on transformers types coil diagram state flow ratio material three formula starting direction theorem method emf operating efficiency digital wave microprocessor test instruments inductance loss measure operation connected signal low applications effect single-phase network temperature working constant losses different law wattmeter measuring compare controlled breaker drive device logic rc full switch flux wire resistivity disadvantages free of materials machines angle force converter conductor transistor gain open protection scr core measurement number bridge principle generators reactance circuits negative the friction iron loop short pole battery conservation steam resistors hysteresis computer using analog lines secondary station gate a rectifier inverter linear induced relays nuclear capacitance basic characteristics design direct work rotor electronics ammeter forces diesel damping rlc connection factors capacitors minimum insulation moving regulation running self systems air fault range main stability quality starter igbt eddy alternator ideal rl average 3-phase plants arc thermal error fuzzy biasing dielectric pressure balanced superposition errors copper rotation feedback impedance measured electronic electrons charge inductive transfer explain start off back curve over solar is three-phase tariff locomotive peak bias zener engineering commutator surge conductors rating universal potentiometer density permanent mechanical transducer capacity memory adc excitation two fuse pure harmonics application semiconductor inductor internal pmmc reaction welding resonance traction permeability breakers rms designed electromagnetic si generation brushes switching capacitive shaded rate 1 distribution resistor methods delta star oscillator reluctance simplification algebra 8085 boolean weston dynamometer insulating strength installation definition fuel heating earth units
...