# Byte is string of how many bits?

31 views
Byte is string of how many bits?

(A) Eight (B) Four (C) Two (D) Sixteen

## Related questions

How many bits Internet address is assigned to each host on a TCP/IP Internet which is used in all communications with host?  A) 16 bits B) 32 bits C) 48 bits D) 64 bits

How many characters per sec (7 bits + 1 parity) can be transmitted over a 2400 bps line if the transfer is synchronous (1 start bit and 1 stop bit)?  A) 300 B) 240 C) 250 D) 275

How many bits are required to represent one nibble ?

How many bits are needed to address 64 K memory: - a) 3 b) 10 c) 16 d) 32

How many bits are required to encode 32 level PCM:  (1) 6 (2) 5 (3) 4 (4) 3

A certain appliance uses 350 W. If it is allowed to run continuously for 24 days, how many kilowatt- hours of energy does it consume? A.20.16 kWh B.201.6 kWh C.2.01 kWh D.8.4 kWh

Intrinsic semiconductor material is characterized by a valence shell of how many electrons? a) 1 b) 2 c) 4 d) 6

About how many times longer would a 10 watt light bulb be able to burn compared to a 100 watt bulb with the same energy?  (A) 10 times longer (B) 100 times longer (C) Same time (D) None of the above

How many minimum number of NOR gates are required to realize a two-input X-OR gate?

In case of a ‘High Voltage DC’ transmission, how many minimum conductors are required?

Approximately how many milliamperes of current flow through a circuit with a 40 V source and 6.8 k ohms of resistance? A.27.2 mA B.59 mA C.5.9 mA D.590 mA

A string of five resistors connected in series is connected across a 6 V battery. Zero voltage is measured across all the resistors except the third resistor. The voltage across the third resistor is: A. 0 V B. 1.2V C. 6V D. 0.6V

A full adder is a combinational circuit that performs the arithmetic sum of three input bits and produces a (a) sum output (b) sum output and a carry (c) sum output with two carries (d) two sums with two carries

And application.

If we have 30kva, 250 kva, 300kva d.g set than how many earthing we do?

In 8085 microprocessor, how many T-states does OPCODE FETCH machine cycle normally require (i.e., when HOLD and WAIT signals are NOT forced)? A) 4 to 6 B) 3 to 8 C) 2 to 3 D) 8 to 12

How many flip-flops are required to build a binary counter circuit to count from 0 to 1023 ? (a) 1 (b) 6 (c) 10 (d) 23

How many non-overlapping channels are available in IEEE 802.11b

How many watt-hours represent 65 W used for 18 h? A.11.7 Wh B.1,170 Wh C.11,700 Wh D.117,000 Wh

If a 5-bus test system contains 6 transmission lines and one transformer, how many non-zero elements are there in the system Y-bus ? (A) 25 (B) 12 (C) 11 (D) 19

How many time we should half the number n to reach 1.  (1) n (2) log(n) (3) n(log(n)) (4) n2

How many flip-flops are required to construct a mod-32 counter?  A) 32 B) 6 C) 5 D) 4

A MOSFET has how many terminals?

Three phase synchronous motor will have how many sliprings?

How many servos can be controlled by Arduino?

How many volts does it take to power an Arduino?

How many watts does a power plant produce?

How many volts are in the power lines?

How many amps do you need for a house?

How many insulator disc used for 33 kV transmission voltage line?

In a 3-insulator string voltage distribution system the ratio of capacitance between pin and earth to the self capacitance of each unit is 1/4. If the potential across the top unit is 8 kV, then the string voltage is (A) 22.5 kV (B) 24 kV (C) 26 kV (D) 32.5 kV

What is byte code in the context of Java?  (1) The type of code generated by a Java compiler (2) The type of code generated by a Java Virtual Machine (3) It is another name for a Java source file (4) It is the code written within the instance methods of a class

An array of size 100 is given and the memory addressing is byte by byte. If The base address of the array is 1000 and every record consists of 40 bytes then address of array[10] will be  (1) 1040 (2) 1400 (3) 1440 (4) 1080

100% string efficiency means : (A) Self capacitance is zero (B) Self capacitance is maximum (C) Shunt capacitance is zero (D) Shunt capacitance is maximum

If the range of an analog transducer is 0 to 10 V, then for a resolution of 5 mV, the bits of ADC will be _____.

Minimum number of bits required to represent maximum value of given analogue signal with 0.1% accuracy is: a. 8 bits b. 9 bits c. 10 bits d. 12 bits

For an ADC, full scale output voltage is about 10 V.For a resolution of about 9.78mV, number of bits required is  A) 6 B) 8 C) 10 D) 12