64 views
in Electrical Engineering by
An energy meter has a constant of 600 rev/kWh. If the meter makes 10 revolutions in 20 s, what is the load in kW? 

(A) 0.75 kW (B) 1.5 kW (C) 3 kW (D) 6 kW 

Your answer

Thanks for your contribution. Feel free to answer this question. Please avoid short answer. Your answer is most welcome. Be genuine.

Upload image or document:

Your name to display (optional):
Privacy: Your email address will only be used for sending these notifications.
Anti-spam verification:
Are you a robot ? (Y = Yes / N = No)
To avoid this verification in future, please log in or register.

Related questions

0 answers 34 views

A meter whose constant is 600 revolutions/kWh makes 5 revolutions in 20 seconds. Calculate the load in kW. (1) 0.5 kW (2) 1 kW (3) 1.5 kW (4) 2 kW  

asked Apr 11, 2018 in Electrical Engineering by Shimroz123
0 answers 41 views

If an energy meter disc makes 10 revolutions in 100 seconds when a load of 450W is connected to it, the meter constant in revolutions per kWh is  A) 1000 B) 500 C) 1600 D) 800

asked Apr 9, 2018 in Electrical Engineering by Shimroz123
1 answer 29 views

The disc of a single phase Induction-type energy meter makes 60 revolutions in 6 minutes. Meter Constant is 1200 rev/kWh. Power consumption in the load is (A) 1.2 kW (B) 1 kW (C) 600 W (D) 500 W

asked Apr 25, 2018 in Instrumentation and control by Shimroz123
1 answer 16 views

The meter constant of a single-phase 230 V induction watt hour meter is 400 revolutions per kWh. The speed of the meter disc for a current of 10 A of 0.9 pf lagging will be

asked Apr 23, 2018 in Electrical Engineering by Shimroz123
0 answers 31 views

A single phase energy meter has a constant of 1200 revolution/kWh. When a load of 200 W is connected, the disc rotates at 4.2 revolutions per min. If the load is on for 10 hours, the meter records an excess of   (a) 0.1 kWh (b) 0.2 kWh (c) 1.0 kWh (d) 2.0 kWh 

asked Apr 10, 2018 in Electrical Engineering by Shimroz123
1 answer 12 views

One single-phase energy meter operating on 230 V and 5 A for 5 hours makes 1940 revolutions. Meter constant is 400 rev/kWh. The power factor of the load is

asked Apr 23, 2018 in Electrical Engineering by Shimroz123
0 answers 23 views

The constant of a given energy meter is 500 revolution/kWh. At the test 4.4 kW full load, meter completes 50 revolutions in 86 seconds. The percentage error of the meter is (a) –4.86% (b) 4.86% (c) 2.0% (d) 3.0%

asked May 26, 2018 in Electrical Measurements and Instrumentation by Shimroz123
1 answer 36 views

What is the frequency of an alternator which has 2 poles and makes 3600 revolutions per minute? A) 3600 HZ B) 60 Hz C) 120 Hz D) None of these

asked Apr 29, 2018 in Electrical Engineering by Shimroz123
0 answers 53 views

The meter constant of a single phase 240 V induction watt hour meter is 400 revolutions per KWhr. The speed of the meter disc for a current of 10 A of 0.8 pf, lagging will be  (A) 12.8 rpm (B) 16.02 rpm (C) 18.2 rpm (D) 21.1 rpm 

asked Apr 5, 2018 in Electrical Engineering by Shimroz123
1 answer 118 views

A 60 Hz, 4 pole turbo generator rated 100 MVA, 13.8 KV has an inertia constant of 10 MJ/MVA. Find the stored energy in the rotor at synchronous speed.  (A) 10 MJ (B) 100 J (C) 1000 J (D) 1000 MJ 

asked Apr 5, 2018 in Electrical Engineering by Shimroz123
0 answers 31 views

A system function has a pole at s=0 and a zero at s= -1. The constant multiplier is unity. For an excitation cos(t), What is the steady-state response?  (A) √2sin(t+450) (B) √2sin(t-450) (C) sin(t-450) (D) Sin(t) 

asked Apr 5, 2018 in Electrical Engineering by Shimroz123
1 answer 25 views

If resistance is 20 Q. and inductance is 27 in a R-L series circuit, then time constant of this circuit will be?

asked Mar 25, 2018 in Electrical Engineering by Shimroz123
0 answers 17 views

A diesel power station spends 0.25 kg/kWh fuel. If the calorific value is 10,000 kcal/kg then overall efficiency of the power station will be   (a) 25% (b) 30% (c) 34.4% (d) 100% 

asked Apr 10, 2018 in Electrical Engineering by Shimroz123
0 answers 46 views

A plant with 10 MW installed capacity produces an annual output of 6 × 6 10 kWh and remains in operation for 2000 hours in a year. The Plant Use Factor is (A) 0.33 % (B) 3.33 % (C) 15 % (D) 30 % 

asked Jun 4, 2018 in Power system by Shimroz123
1 answer 148 views

A 50 Hz, 4 pole turboalternator rated at 20 MVA. 13.2 KV has an inertia constant H = 4 KW sec/KVA. The K.E. stored in the rotor at synchronous speed is

asked May 3, 2018 in Electric Power Transmission by Shimroz123
0 answers 18 views

For an NMOS transistor, Vt= 2 V, Vgs= 3 V, Vdd= 10 V,µnCox=20 µA/V2 , L=10 meter, W= 400 µmeter. The drain current (in mA) is  A) 2 B) 1.2 C) 0.4 D) 0.2

asked Apr 9, 2018 in Electronics Engineering by Shimroz123
1 answer 15 views

An amplifier operating over the frequency range from 18 to 20 MHz has 10 kilo ohm input resistor. What is the r.m.s. noise voltage at the input to this amplifier if the ambient temperature is 27o C

asked May 23, 2018 in Amplifier by Shimroz123
0 answers 7 views

What is the output voltage of a battery if 10 J of energy is expended in moving 1.25 C of charge?

asked Jul 1 by Shimroz123
1 answer 20 views

kWh meter is the electric meter that measures the amount of electrical _________ in kWh that was consumed in the house.  (A) Energy (B) Current (C) Voltage (D) None of the above

asked May 8, 2018 in Electrical Engineering by Shimroz123
0 answers 12 views

A silicon p-n junction at a temperature of 20 °C has a reverse saturation current of 10 pA. The reverse saturation current at 40 °C will approximately be (a) 30 pA (b) 40 pA (c) 50 pA (d) 60 pA

asked May 25, 2018 in Physics by Shimroz123
1 answer 48 views

 A pulse radar has a pulse repetition frequency (PRF) of 3 KHz. If the radar is emitting at 10 GHz, what is the maximum unambiguous range for this radar? A) 5 Km B) 5 m C) 50 Km D) 15 m 

asked Jun 18, 2018 in Electrical Engineering by Shimroz123
0 answers 92 views

 When The dc converter in figure shown has a resistance load of R = 10 Ω and the input voltage is Vs 220 V the converter switch remains on, its voltage drop is Vo -2 V. The chopping frequency is fI K sW Vs If the duty cycle is 50%, determine: (a) the average output voltage V (b) the RMS output voltage Vo (c) the converter efficiency (d) the effective input resistance of the converter

asked Apr 26 by Hussein
1 answer 63 views

A consumer consumes. 600 kWh per day at a load factor of 0.40. If the consumer increases the load factor of 0.70 without increasing the maximum demand, what is the consumption of energy in kWh?

asked Mar 27, 2018 in Power system by Shimroz123
1 answer 11 views

In an induction type energy meter, the steady speed attained by the rotating disc is  1. Proportional to the deflecting torque. 2. Proportional to the resistance of the path of eddy currents. 3. Inversely proportional to the effective readings of disc from its axis. 4. Inversely proportional to the square of brake magnet flux.  Which of the above are correct ?

asked Apr 23, 2018 in Electrical Engineering by Shimroz123
1 answer 24 views

 An energy signal has G(f) = 20. Its energy density spectrum is A) 20 B) 100 C) 400 D) 800  

asked Jun 18, 2018 in Electronics Engineering by Shimroz123
1 answer 24 views

What is the power factor when a single phase watt meter operating on 200 V and 5 A for 5 hours makes 2016 revolutions and the meter constant in revolution is 420? A) 0.04 B) 1.04 C) 0.96 D) None of these

asked Apr 29, 2018 in Electrical Engineering by Shimroz123
1 answer 12 views

If a transformer has 50 turns in the primary winding and 10 turns in the secondary winding, what is the reflective resistance if the secondary load resistance is 250 ohms? A.250 ohms B.25 ohms C.6,250 ohms D.62,500 ohms

asked May 15, 2018 in Basic concepts by Shimroz123
1 answer 21 views

An energy signal has G(f) = 10. Its energy density spectrum is:  (1) 10 (2) 100 (3) 50 (4) 20

asked Apr 9, 2018 in Electronics Engineering by Shimroz123
1 answer 17 views

A 35 V dc supply is connected across a resistance of 600 ohm in series with an unknown resistance R. A voltmeter having a resistance of 1.2 kOhm is connected across 600 ohm resistances and reads 5 V. The value of resistance R shall be:

asked May 22, 2018 in Electrical Engineering by Shimroz123
1 answer 23 views

We connected a 35V dc supply to a resistance of 600 Ohm in series with an unknown resistance R.A. voltmeter having a resistance of 1.2 kOhm is connected across 600 Ohm resistance and read 5v. The value of resistance R will be

asked May 8, 2018 in Electrical Engineering by Shimroz123
1 answer 29 views

If eight -tenths coulomb passes a point in 4 s, the value of current is equal to: A. 1.6 A B. 16 A C. 2 A D. 0.2 A

asked Apr 12, 2018 in Electrical Engineering by Shimroz123
1 answer 23 views

While keeping the excitation constant, if the steam supply of an alternator running in parallel with another identical alternator is increased, then (A) It would over-run the other alternator (B) Its rotor will fall back in phase with respect to the other machine (C) Its portion of share in load will increase (D) Its power factor would be decreased.

asked Apr 28, 2018 in Electrical Machine by Shimroz123
1 answer 31 views

The r.m.s. value of a half-wave rectified alternating current is 10 A. Its value for full-wave rectification will be  

asked May 25, 2018 in Electrical Engineering by Shimroz123
1 answer 191 views

A 10 km long line has a characteristic impedance of 400 ohms. If line length is 100 km, the characteristic impedance is: (1) 4000 Ω (2) 400 Ω (3) 40 Ω (4) 4 Ω

asked May 28, 2018 in Electric Power Transmission by Shimroz123
0 answers 126 views

An electron having an energy of 20 eV enters a magnetic field of 0.02 webers/sqm at an angle of 30degrees to the field. The time of travel (in nS)of the electron for one revolution is about  A) 1.78 B) 4.21 C) 7.82 D) 10.24 

asked Apr 9, 2018 in Electronics Engineering by Shimroz123
1 answer 123 views

A 50Ω transmission line is terminated in an impedance of 20-j50. What will be the reflection coefficient? A) 0.69 B) 1.69 C) 6.9 D) 16.9 

asked Jun 18, 2018 in Electrical Engineering by Shimroz123
0 answers 10 views

Each branch of Y-connected load has resistance of 10 Ω. The resistance of each branch of an equivalent ∆-connected load will be   (a) 30 Ω (b) 100 Ω (c) 110 Ω (d) None of these

asked Apr 10, 2018 in Electrical Engineering by Shimroz123
0 answers 67 views

If one of the control springs of PMMC ammeter is broken when it is connected in a circuit, the meter will read  A) Half the correct value of current B) Twice the correct value of current C) An indefinite figure D) Zero

asked Apr 9, 2018 in Electrical Engineering by Shimroz123
1 answer 22 views

The voltage across a coil, when di/dt = 20 mA/s and L = 8 H, is: A. 16 mV B. 160 mV C. 1.6 mV D. 2.5 mV

asked Apr 12, 2018 in Electrical Engineering by Shimroz123
1 answer 23 views

In a d.c. series motor, the torque developed is 20 Nm at 10A. If the load current is doubled, the new torque will be : -  a) 60 Nm b) 45 Nm c) 80 Nm d) 100 Nm

asked Apr 11, 2018 in Electrical Engineering by Shimroz123
1 answer 8 views

What is meant by energy meter constant?

asked Sep 6, 2018 by Shimroz123
1 answer 64 views

The inertia constant of a 100 MVA, 11 kV water wheel generator is 4. The energy stored in the rotor at the synchronous speed is: A) 400 Mega Joule B) 400 Kilo Joule C) 25 Mega Joule D) 25 Kilo Joule

asked Jun 4, 2018 in Power system by Shimroz123
0 answers 17 views

A 1:5 step-up transformer has 120V across the primary and 600 ohms resistance across the secondary. Assuming 100% efficiency, the primary current will be:  (A) 0.2 Amp. (B) 5 Amps. (C)10 Amps. (D) 20 Amps

asked Apr 9, 2018 in Electrical Engineering by Shimroz123
1 answer 18 views

 If the range of an analog transducer is 0 to 10 V, then for a resolution of 5 mV, the bits of ADC will be _____.

asked May 29, 2018 in Transducers and sensors by Shimroz123
1 answer 45 views

The reactance offered by a capacitor to an alternating current of frequency 50 Hz is 10 ohm. If frequency is increased to 100 Hz, the reactance will be (a) 2.5 ohm (b) 5.0 ohm (c) 20.0 ohm (d) 40.0 ohm 

asked May 25, 2018 in Capacitor by Shimroz123
1 answer 22 views

What is the total resistance if 5 resistors of 20 Ω each are connected in series? A) 100 Ω B) 4 Ω C) 20 Ω D) None of these

asked Apr 29, 2018 in Electrical Engineering by Shimroz123
1 answer 27 views

In 8086 microprocessor , the address bus is ________ bit wide A. 12 bit B. 10 bit C. 16 bit D. 20 bit

asked Sep 28, 2018 in Microprocessors and Microcontrollers by Shimroz123
0 answers 15 views

In a Hartley oscillator, L1 = 0.1 mH, L2 = 10 µH and mutual inductance between coils equals 20 µH. The voltage gain needed for sustained oscillations should be (a) 2.37 (b) 0.1 (c) 11.54 (d) 9.09 

asked May 25, 2018 in Electronics Engineering by Shimroz123
1 answer 15 views

An inductor of Q factor 10 is connected in series with a capacitor having a Q factor of 100. The overall Q factor of the circuit is :  (A) 100/11 (B) 11/100 (C) 110 (D) 1000

asked Apr 30, 2018 in Electrical Engineering by Shimroz123

Welcome to electronics2electrical.com here you can ask questions related to electrical, electronics, mechanical, telecommunication, instrumentation, computer, mathematics, physics etc.
Be respectful to all the members. Do not copy and paste the answers from other websites which have copyright content. While asking question give full details about it.

Categories

Most popular tags

power motor dc circuit transformer voltage current used system phase resistance factor synchronous load ac energy induction electric generator series frequency between speed capacitor use electrical meter line difference control type mosfet transmission magnetic plant high single instrument bjt unit source advantages function diode and machine winding field define torque parallel amplifier supply shunt thyristor motors electricity arduino maximum time relay armature problem value on transformers types coil diagram state flow ratio material three formula starting direction theorem method emf operating efficiency digital wave microprocessor test instruments inductance loss measure operation connected signal low applications effect single-phase network temperature working constant losses different law wattmeter measuring compare controlled breaker drive device logic rc full switch flux wire resistivity disadvantages free of materials machines angle force converter conductor transistor gain open protection scr core measurement number bridge principle generators reactance circuits negative the friction iron loop short pole battery conservation steam resistors hysteresis computer using analog lines secondary station gate a rectifier inverter linear induced relays nuclear capacitance basic characteristics design direct work rotor electronics ammeter forces diesel damping rlc connection factors capacitors minimum insulation moving regulation running self systems air fault range main stability quality starter igbt eddy alternator ideal rl average 3-phase plants arc thermal error fuzzy biasing dielectric pressure balanced superposition errors copper rotation feedback impedance measured electronic electrons charge inductive transfer explain start off back curve over solar is three-phase tariff locomotive peak bias zener engineering commutator surge conductors rating universal potentiometer density permanent mechanical transducer capacity memory adc excitation two fuse pure harmonics application semiconductor inductor internal pmmc reaction welding resonance traction permeability breakers rms designed electromagnetic si generation brushes switching capacitive shaded rate 1 distribution resistor methods delta star oscillator reluctance simplification algebra 8085 boolean weston dynamometer insulating strength installation definition fuel heating earth units

8,471 questions

7,069 answers

134 comments

3,088 users

...