# A 339 IC is an example of a fourteen-pin DIP that can be made to function as a ________:

24 views
A 339 IC is an example of a fourteen-pin DIP that can be made to function as a ________:

(1) Comparator (2) 555 timer (3) D to A converter (4) Ladder network

A 339 IC is an example of a fourteen-pin DIP that can be made to function as a Comparator.

## Related questions

1 answer 76 views

Norton’s theorem states that a complex network connected to a load can be replaced with an equivalent impedance (A) in series with a current source (B) in parallel with a voltage source (C) in series with a voltage source (D) in parallel with a current source

1 answer 8 views

Fourteen milliamperes can be expressed as? A.14 MA B.14 μA C.14 kA D.14 mA

1 answer 29 views
1 answer 19 views

TRIAC is an ac switch which can be made to conduct on

1 answer 37 views

An induction type energy meter is found to run fast. Correction for this error can be made by  (A) Over-load compensation. (B) Voltage compensation. (C) Moving the brake magnet away from the centre of the disc. (D) Moving the brake magnet towards the centre of the disc.

0 answers 10 views

The transfer function of a phase lead compensator is found to be the form (s+z1 ) / (s + p1 ) and that of a lag compensator to be of the form (s+z2 ) / (s + p2 ). Then which of the following conditions must be satisfied?  (A) z1 > p1 and z2 > p2 (B) z1 > p1 and z2 < p2 (C) z1 < p1 and z2 < p2 (D) z1 < p1 and z2 > p2

0 answers 8 views

Timer IC 555 has no pin for  A) Threshold B) Set C) Trigger D) Control

1 answer 8 views

n-type semiconductor can be made by adding ____ to intrinsic semiconductor (A) Boron (B) Arsenic (C) Carbon (D) Germanium

3 answers 19 views

A light emitting diode (L.E.D.) can be made from:

1 answer 79 views
0 answers 26 views

In IC, transistors are utilised as diodes.To get highest breakdown voltage for such diode, it is adjusted to have  A) Ie=0 B) Ic=0 C) Vcb=0 D) Vce=0

0 answers 17 views

Gauge factor of about 5 can be obtained using strain gauge made of  A) Constantan B) Ferry C) Nichrome V D) Platinum

0 answers 20 views

One of the necessary and sufficient condition for a network function N(s)=p(s)/q(s) to be a transfer function is that  A) The coefficients of the polynomial p(s) and q(s) must be real and those for q(s) must be positive B) Coefficients of p(s) and q(s) must be real and positive C) Coefficients of p(s) must be positive and real but coefficients of q(s) can be negative also D) Degree of p(s) and q(s) may differ by either zero or one only

0 answers 17 views

The way a card game player arranges his cards as he picks them up one by one, is an example of  (1) Insertion sort (2) Selection sort (3) Bubble sort (4) Merge sort

1 answer 14 views

Memory that temporarily stores data and that can be erased or changed is known as  a) Cache Memory b) Read Only Memory c) Flash Memory d) Random Access Memory

0 answers 151 views
1 answer 134 views

Sketch pin configuration of IC 723. State functions of each pin. Sketch circuit diagram for obtaining 6V output d.c. regulated voltage using IC 723.

0 answers 30 views
1 answer 26 views

An iron cored inductance coil can be modelled, over a normal operating range of networks ,as A) non-Linear bilateral element B) linear bilateral element C) linear time varying element D) non-linear time invariant element

1 answer 29 views
1 answer 27 views

A synchronous motor has better power factor as compared to that of an equivalent induction motor. This is mainly because?

0 answers 15 views

An example of a non-vectored interrupt in 8085 microprocessor is  A) INTR B) TRAP C) RST 5.5 D) RST 7.5

0 answers 591 views

Schmitt trigger is an example of a  A) Mono-stable multivibrator B) Bistable multivibrator C) Astable multivibrator D) None of the above

1 answer 20 views

The necessary and sufficient condition for a rational function of, T(s) to be driving point impedance of an RC network is that all poles and zeros should be

1 answer 17 views
1 answer 13 views

Without any additional circuitry, an 8:1 MUX can be used to obtain:  (1) Some but not all Boolean functions of 3 variables (2) All function of 3 variables but none of 4 variables (3) All functions of 3 variables and some but not all of 4 variables (4) All functions of 4 variables

0 answers 24 views

The register in the 8085A that is used to keep track of the memory address of the next op -code to be run in the program is the : a. stack pointer b. program counter c. accumulator d. None of above

1 answer 10 views

A keyword can be used as an identifier by using the  A) prefix # B) prefix @ C) prefix \$ D) prefix x

1 answer 13 views
0 answers 22 views

What is the maximum data rate that can be transmitted using a QPSK modulation with a roll-off factor of 0.2 for a 36 MHZ transponder?  A) 7.2 Mbps B) 30 Mbps C) 43.2 Mbps D) 60 Mbps

1 answer 12 views
0 answers 17 views

Which component of the .NET Framework allows you to create character-based applications that can be executed from the command line?  (1) Common Language Runtime (2) Console Applications (3) Web Forms (4).NET Class Framework

1 answer 17 views

Consider the following statements with regard to inverters 1. Line commutated inverters can function as isolated ac sources 2. Force commutated inverters can provide independent ac voltage with adjustable voltage and frequency 3. Thyrister based inverters do not require additional circuitry for commutation 4. IGBT, PMOSFET based inverters are more reliable, less costly and less complex. The correct statements are A)1,3 B)1,3,4 C) 2,4 D) 1,4

2 answers 38 views

The IC chips, used in computers, is made of  (1) Iron oxide (2) Silicon (3) Graphite (4) Silica

1 answer 28 views

Microprocessor is a/an _______ circuit that functions as the CPU of the compute  A. electronic B. mechanic C. integrating D. processing

1 answer 78 views
2 answers 74 views

The sum of product expression for a Boolean function can be derived from its truth table by (a) AND operation of the product terms. (b) NOR operation of the product terms. (c) OR operation of the product terms. (d) NAND operation of the product terms.

1 answer 104 views

The microprocessor can read/write 16 bit data from or to ________ A. memory B. I /O device C. processor D. register

1 answer 10 views

Electric ovens using heating elements made of _________can produce a temperature up to 3000°C. (A) nickel (B) graphite (C) chromium (D) iron

0 answers 16 views

As compared to a closed loop system an open loop system is  (a) more stable as well as more accurate (b) less stable as well as less accurate (c) more stable but less accurate (d) less stable but more accurate

1 answer 17 views

A synchronous motor can be made self starting by providing?

1 answer 188 views

parallel operation of MOSFET can be done more easily as compared to thyristor. why?

1 answer 19 views

A signal other than the reference input that tends to affect the value of controlled variable is known as ?

1 answer 18 views
1 answer 13 views

The effect of a finite gain of an operational amplifier used in an integrator is that (A) it would not integrate (B) the slope of the output will vary with time (C) the final value of the output voltage will reduce (D) there will be instability in the circuit

0 answers 12 views

The waveguide Magic Tee can be used as: a. An Isolator b. T/R switch in trans -receiver c. Adjustable Phase Shifter d. All of these

1 answer 12 views

An OP-AMP can be classified as  1.Linear amplifier 2.Low - Rin amplifier 3.Positive - feedback amplifier 4.RC - coupled amplifier

0 answers 21 views

How can BJT be used as an amplifier?

1 answer 16 views

In an unclocked R-S flip flop made of NOR gates, the forbidden input condition is:  (1) R=0, S=0 (2) R=1, S=0 (3) R=0, S=1 (4) R=1, S=1