# A flasher circuit application is a : -

5 views
A flasher circuit application is a : -

a) Safety blinkers for bicycles c) Street Light Control  b) Rides lighting d) Glow lamp

A flasher circuit application is a : - Safety blinkers for bicycles

## Related questions

Time constant of a circuit is the time in seconds taken after the application of voltage to each?

Sampling theory finds its application in: -  a) Amplitude Modulation b) Frequency Modulation c) PCM d) Phase Modulation

What is the line current of a circuit when the current transformer of 1000 : 5 rating measures 4 amp? (A) 5000 amp (B) 1000 amp (C) 400 amp (D) 800 amp

The Q factor of a coil at resonant frequency 1.5 MHz of an RLC series circuit is 150. The Bandwidth is : - a) 225 MHz b) 1.06 MHz c) 10 KHz d) 10 MHz

When measuring strain, ballast circuit use a capacitor to act as a high pass filter. This is done when:  a) Static strain are being measured b) Dynamic strain are being measured c) Both Static and dynamic strain are being measured d) None of the above

When a pure inductor is connected in series with a lamp circuit, effect is: -  a) Dimmer b) Brighter c) Same d) Fused

State the function of a contactor in a power circuit of locomotive. List different types of it and state one application of each.

Application of Norton's theorem to a circuit yields : (A) Equivalent current source only (B) Equivalent voltage source only (C) Equivalent voltage source and impedance in series (D) Equivalent current source and impedance in parallel

Application of Norton's theorem to a circuit yields?

Which of the following circuit breakers is preferred for EHT application: -  a) Air blast circuit breakers b) Minimum oil circuit breakers c) Bulk oil circuit breakers d) SF6 oil circuit breakers

A 0 -10 mAPMMC ammeter reads 5 mA in a circuit; its bottom control spring snaps out suddenly the meter will now read:- a) 5 mA b) 10 mA c) 2.5 mA d). 0

Which of these represent short in a series circuit?  a) Increase in resistance b) Increase in current c) Increase in voltage d) Increase in conductance

State the following, 1) Position of head light 2) Supply voltage for flasher light 3) Colours used for marker light 4) Frequencies for engine horn.

Compare AC & DC track circuits on i) Length of circuit ii) Application iii) Effect of stray currents. iv) Maintenance

State any four applications of three phase circuits.

You are developing a web application that is retrieving historical library information from a database server and displays it to the users of your application. What cache strategy will give you the best performance?  (1) Use the output cache. (2) Use the cache object. (3) Use the ASP.NET central cache. (4) Use the client cache

You want to debug a Web-based ASP.NET application. But for some cause debugging information is not shown. What could be missing?  (1) <%@ Page Debug="true" %> (2) <%@ Application Debug="true" %> (3) <%@ Page Trace="true" %> (4) <%@ Application Trace="true" %>

One application of a digital multiplexer is to facilitate:  (1) Code conversion (2) Parity checking (3) Parallel-to-serial data conversion (4) Data generation

If the distance of screen from a CRT to center of deflection plates is 15 cm, the length of deflection plates is 2 cm, the distance between the plates is 1 cm and accelerating voltage is 500 V, deflection sensitivity is   (a) 33.2 V/cm (b) 0.03 cm/V (c) 66.4 V/cm (d) 0.015 cm/V

The disc of a single phase Induction-type energy meter makes 60 revolutions in 6 minutes. Meter Constant is 1200 rev/kWh. Power consumption in the load is (A) 1.2 kW (B) 1 kW (C) 600 W (D) 500 W

The potential coil of a single phase dynamometer wattmeter has 4840 Ohm resistance. Voltage across the load is 220 V. With the potential coil connected on the load side, the meter indicates 100 W. Approximate percentage error due to wattmeter connection is (A) 11% (B) 9% (C) 1.1% (D) 3%

Converter is a device for transforming (A) ac to dc (B) dc to dc (C) dc to ac (D) ac to ac

The input frequency is 50 Hz. The ripple frequency in a 12 phase full wave rectifier is (A) 1200 Hz (B) 600 Hz (C) 100 Hz (D) 50 Hz

Intrinsic semiconductor material is characterized by a valence shell of how many electrons? a) 1 b) 2 c) 4 d) 6

A zero -level detector is a - a) comparator with a sine wave output b) comparator with a trip point referenced to zero c) peak detector d) limiter

The maximum phase lead is contributed by a phase lead network at: - a) mid corner frequency b) lower corner frequency c) upper corner frequency d) phase corner frequency

The polarity of induced voltage while a field is collapsing is : - a) independent of the force creating the field b) opposite to the force creating c) the field identical to the force creating d) the field present only if the force is stationary

The output of an AND gate with three inputs, A, B and C, is HIGH when __________. a) A=1,B=1,C=0 b) A= 0,B= 0,C= 0 ' c) A=1,B=1,C=1 d) A=1,B= 0,C= 1

In a thyristor Latching current is than holding current: - a) equal b) less c) greater d) none of the above

A thermistor is generally a semiconductor material exhibits: a) Positive Temperature co -efficient b) Negative Temperature co -efficient c) Neither positive nor negative temperature co -efficient d) both (a) and (b)

A Voltage Controlled Oscillator (VCO) is an instrument : - a) whose frequency is dependent upon the amplitude of input signal b) whose frequency is independent upon the amplitude of input signal c) whose frequency is dependent upon the frequency of input signal d) none of the above

The term absolute Pressure is used for a pressure measured relative to: - a) vacuum pressure b) some fixed pressure c) atmospheric d) all the above

A bimetallic strip is used to convert a temperature change - a) into mechanical displacement b) into electrical displacement c) into neither mechanical nor electrical displacement d) all of the above

The modulation index of a FM Signal having modulating frequency 2 KHz and Max deviation is 10 KHz, is: -  a) 2 b) 5 c) 3 d) 4

A toothed type Tacho-generator has 60 teeth. A magnetic pickup is used in conjunction with it. The number of pulses generated per second in the magnetic pick up is : -  a) 3000 b) 1500 c) 1800 d) 1200

The input voltage to an OP AMP is a large voltage step. The output is an exponential waveform that changes to 0.25 V in 0.1µs (microsecond). The slew rate of the OP AMP is : -  a) 5V/µs b) 2.5 V/ µs c) 3V/µs d) 4.5V/ µs

The effective resistance of a coil at high frequency is more than its de resistance on account of : -  a) Skin effect b) Proximity effects c) Eddy current losses d) All the above

An aquadog is used in a 'CRO' to collect -  a) Secondary emission electrons b) Primary emission electrons c) Both Primary and Secondary emission electrons d) None of the above

Which of these is not a semiconductor?  a) Si b) Tungsten c) Germanium d) None of these

The Kirchoff's law for a.c. is applicable upon consideration of -  a) Phasor sum b) Algebraic sum c) Progression sum d) Linear sum

Which of these is not a photoelectric device ?  a) Photoconductive cells Photoemissive cells c) Photoresistive cells d) Photovoltaic cells

Which of these is a thick -film resistor: -  a) wire would resistor b) carbon composition resistor c) metal film resistor d) cermet film resistor

Transformer coupling is used in class A amplifier to make it : -  a) more efficient b) less bulky c) less costly d) distortion free

To turn a conducting SCR to off state, it is necessary to make : -  a) anode current less than holding current b)gate current zero  c) anode voltage less than break over voltage  d) gate voltage zero

The primary function of a filter is to : -  a) minimize input variations b) suppness odd harmonics in the rectifier output c) stabalise DC level of o/p voltage d) remove ripples from rectified output