# Total numbers of ascending runs in the sequence 4 6 7 2 9 1 2 8 9 3 0 (1) 3 (2) 5 (3) 7 (4) 9

15 views
Total numbers of ascending runs in the sequence 4 6 7 2 9 1 2 8 9 3 0

(1) 3 (2) 5 (3) 7 (4) 9

## Related questions

For a balanced three phase star connected load for which line voltage is 230V and per phase resistance and reactance is 6 Ohm and 8 Ohm respectively. Calculate: 1) phase voltage 2) line current 3) power factor 4) total power absorbed

System 1 : The first column of the RH array consists of the terms 6,3,9,-2, and 4. System 2 : The first column of the RH array consists of the terms 3,6,9,2, and -4. The number of unstable poles for system1, and system 2, are respectively, (A) 1,1 (B) none, none (C) 2,2 (D) 2,1

State the function of following components related to mimic diagram. 1) PL 2) OPL 3) CHL 4) GCK 5) LTK 6) ARK

Which of the following sorts is quickest when sorting the following set: 1 2 3 5 4  (1) Quick Sort (2) Bubble Sort (3) Merge Sort (4) Heap Sort

(AABC)16 = ( _______)8  (1) 123456 (2) 125274 (3) 127890 (4) 324512

Three materials X, Y and Z having relative permittivity 2.5, 3.0 and 4.0 respectively are used in a single core cable. The materials on inner most and outer most layer respectively should be (a) X and Y (b) Y and Z (c) X and Z (d) Z and X

The system of equations x + y+ z = 6, 2 x + y +z = 7, x + 2 y +z=8 has a. A unique solution b. No solution c. An infinite number of solutions d. None of these

PCB =  (1) Program Control Block (2) Process Control Block (3) Process Communication Block (4) None of the above

When a dipole antenna of 1/8 length has an equivalent total resistance of 1.5 Watt then the efficiency of the antenna is   (A) 0.89159% (B) 8.9159% (C) 89.159% (D) 891.59%

106 bytes of memory is called  (1) 1 KB (2) 1 MB (3) 1 GB (4) 1 TB

230 bytes of memory is called  (1) 1 KB (2) 1 MB (3) 1 GB (4) 1 TB

The current in a 200 mH coil increases from 2 to 5 A in 0.1 Second. What is rate of change of current? A. 30 A/s B. 20 A/s C. 10 A/s D. none of these

In a dc-ac 3-phase MOSFET bridge inverter circuit, the switches are marked in a sequence as 1, 2, 3 in the top-half and 4, 5, 6 in the bottom half of the bridge. The triggering sequence of switches that gives balanced output voltage is (A) 1, 2, 3, 4, 5, 6 (B) 1, 5, 3, 4, 2, 6 (C) 1, 6, 2, 4, 3, 5 (D) 1, 4, 2, 5, 3, 6

MSXML is  (1) A Microsoft language (2) XML parser that ships with Internet explorer 5.0 (3) Used for interacting with XML (4) None of these

When the SCR conducts, the forward voltage drop will   (a) 0.7 V at all load current (b) 2 to 2.5 V at all load current (c) increases slightly with load current (d) remains constant with load current

Three resistors of 4 Ω, 6 Ω and 9 Ω are connected in parallel. Which resistor consumes the maximum power?  (A) 4 Ω (B) 6 Ω (C) 9 Ω (D) 17 Ω

A 0.5 Hp, 6 pole wound rotor induction motor is excited by a 3 phase 60 Hz source. Calculate the frequency of the rotor current at standstill.  (A) 50 Hz (B) 30 Hz (C) 60 Hz (D) 120 Hz

State the nature of protection provided for following types of faults; 1) Over voltage 2) Under voltage 3) High air pressure in air circuit 4) Low air pressure in air circuit

The sequence in which the speed is increasing in ascending order  a. RAM  b. Hard disk  c. Cache  d. Thumb Drive/Memory Stick  (1) dbac (2) bdac (3) badc (4) abdc

The armature resistance of a permanent magnet dc motor is 0.8 Ohm. At no load, the motor draws 1.5 A from a supply voltage of 25 V and runs at 1500 rpm. The efficiency of the motor while it is operating on load at 1500 rpm drawing a current of 3.5 A from the same source will be  (A) 48.0% (B) 57.1% (C) 59.2% (D) 88.8%

A dc shunt motor runs at 500 r.p.m at 220 V. A resistance of 4.5 Ω is added in series with the armature for speed control. The armature resistance is 0.5 ohms. The current to stall the motor will be (1) 44 A (2) 50 A (3) 44.4 A (4) 60 A

A relay has a rating of 5 A, 2.2 sec IDMT and a relay setting of 125% TMS = 0.6. It is connected to a supply circuit through a C.T. 400/5 ratio. The fault current is 4000 A. The operating current of the relay is

A rectangular waveguide is 5.1 cm by 2.4 cm (inside dimension). The cut off frequency of the dominant mode is

In a graph, the number of independent loops is 6 and the number of independent cut sets is 5, The total number of branches in the graph is A) 9 B) 12 C) 10 D) 11

An 1.8° step, 4 -phase stepper motor has 40 teeth on 8 poles of the stator. The number of rotor teeth for their rotor will be: (A) 40 (B) 50 (C) 100 (D) 80

Find the area of the triangle whose vertices are 4,3 1,4 and 2,3 .

State the following, 1) Position of head light 2) Supply voltage for flasher light 3) Colours used for marker light 4) Frequencies for engine horn.

Draw the symbol and state the applications of : 1) Push button switch 2) Selector switch 3) Solenoid valve 4) Limit switch

Positive feedback is used in 1. Amplifier 2. Rectifier 3.Oscillator 4. Detector

If three wires of 3 ohms, 9 ohms and 5 ohms respectively are connected in series, what their resultant resistance? A.10 ohms B.12 ohms C.17 ohms D.5 ohms

Attributes in XML are  (1) Elements in XML (2) Child nodes (3) A way of attaching characteristics or properties to elements of a document (4) None of these

A 4 bit counter is used to count from 0,1,2...n. Value of “n” is

When 7/0.029 V.I.R cable is carrying 20 A, a drop of 1 V occurs every 12 m. The voltage drop in a 100 m run of this cable when it is carrying 10 A is nearly  (a) 4.2 V (b) 3.2 V (c) 1.2 V (d) 0.42 V

Give purpose and location of following signals, 1) Warner: 2) Co-acting: 3) Shunt: 4) Detonating:

RJ 45 UTP cable has _____cables. A. 2 Pairs B. 3 Pairs C. 4 Pairs D. 5 Pairs

Consider the following transducers : 1. LVDT 2. Piezoelectric 3. Thermocouple 4. Photovoltaic cell  Which of the above are active transducers ?

What is the correct sequence of the following materials in ascending order of their resistivity ?  1. Iron  2. Silver  3. Constantan  4. Mica  5. Aluminium  Select the correct answer using the codes given below :  (a) 2, 5, 1, 3 and 4  (b) 4, 5, 3, 1 and 2  (c) 2, 3, 1, 5 and 4  (d) 4, 5, 1, 3 and 2

The gain of a parabolic dish antenna of 1 m diameter -and 80% efficiency at 9.5 GHz is: a. 39 dB b. 78 dB c. 40 dB d. 45 dB

Which of the following can‟t be declared static?  (1) Member variables (2) Object (3) functions (4) none of these

The DFD is  (1) modern version of flowchart (2) mainly used at system specification stage (3) primary output of the system design phase (4) all of these

A 3-phase, 4-pole, 50Hz induction motor runs at a speed of 1440 rpm. The rotating field produced by the rotor rotates at a speed of ________ rpm with respect to stator field. (A) 1500 (B) 0 (C) 1440 (D) 60

A high-pass filter has a resistance R = 2 kΩ The lowest input frequency to be passed is 7.5 kHz. The value of suitable coupling capacitor must be: A) 0.001 pico Farad B) 0.01 pico Farad C) 0.1 pico Farad D) 1 pico Farad

An 8-pole alternator runs at 750 rpm and supplies power to a 6-pole induction motor which has a full load slip of 3 percent. The full load speed of the induction motor will be: A) 1000 rpm B) 920 rpm C) 950 rpm D) 970 rpm

In C++ , a constructor is called whenever  (1) an object is created (2) an object is used (3) a class is declared (4) a class is used

In the case of an instrument reading of 8.3 V with a 0 to 150 voltmeter having a guaranteed accuracy of 1% full scale reading, the percentage limiting error is   (A) 1.810% (B) 0.181% (C)12.45% (D) 0.0018%